PROMOUNTS OMT8405-AU Tilt Flat TV Wall Mount Instruction Manual
- June 16, 2024
- PROMOUNTS
Table of Contents
INSTALLATION MANUAL
UT-PRO410
Tilt Flat TV Wall Mount
UT-PRO410
200×200/300×200
300×300/400×200
400×300/400×400
600×400/600×600
800×600/900×600
165lbs
75kg
(rated)
A (x1)
B (x1)
C (x1)
D (x2) E (x1)
| | |
---|---|---|---
M5x14 (x4) M-A| M6x14 (x4) M-B| M6x30 (x4) M-C|
M8x30 (x4) M-D
| | |
M8x50 (x4) M-E| M-F (x4)| M-G (x8)|
M-H (x8)
| |
W-A (x6)| W-B (x6)|
W-C (x6)
[1]
[2a] Wood Wall Studs:
Measure and pre-drill 6 holes.
Using the long bolts,
Fix A to the stud wall
[2b] Concrete Walls:
Measure and pre-drill 6 holes.
Insert wall anchors, then using long bolts
Fix A to the concrete wall
[3a] Flat VESA:
Using bolts and washers,
Fix your TV with part B and C
[3b] Multi-level VESA:
Using long bolts, washers, and spacers
Fix your TV with part B and C
[4]
Hang your TV to part A
Lock using built-in Hinge
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Mounts must be attached as specified in assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- This product is designed to be installed on wood stud walls, solid concrete walls or brick walls.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the
component checklist prior to installation. If any parts are missing or faulty,
telephone your local distributor for a replacement.
MAINTENANCE: Check that the bracket is secure and safe to use at regular
intervals (at least every three months).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>