ZEB THUMP 300 Portable BT Speaker User Manual
- May 15, 2024
- ZEB
Table of Contents
Portable BT Speaker
ZEB THUMP
300
User Manual
www.zebronics.com
THUMP 300 Portable BT Speaker
Dear Customer,
Thank you for purchasing ZEB-THUMP 300 Portable BT Speaker. Please read the
user manual carefully before usage & save it for future reference.
Note:
- Avoid the usage of this product at the high temperature and high humidity environment.
- Avoid the self-disassembly of the products or it results in the voiding the product’s Warranty.
- Turn off the speaker when the speaker is not inuse.
- To know more about Terms and conditions forwarranty policy, please visit https://zebronics.com/pages/warranty-policy
Features
BT v5.0 / USB/ mSD / AUX
20.32cm Speaker Driver
TWS Function
6.3mm Mic & Guitar Input
Echo Control
Built-In Rechargeable Battery
Karaoke Function
RGB LED Lights with Control Button
LED Display
Type C Charging Port
Voice changing Wireless mic
Mobile holder
Specifications
Output Power (RMS)
BT Version
Driver Size
Speaker Impedance
Mid Range
Tweeter
Frequency Response
S/N Ratio
Max Supported
USB/mSD memory size
Supported
Audio formats
Chargingtime
Playback time
Product Dimension
(WxDxH)
Net. Weight| :30W
V5.0
:20.32cm
130
:10Q
:150Hz
to 20kHz
:>80dB
:32GB
:Mp3
:7h
110h*
128x27x33.5cm
:3.7Kg
---|---
Package Contents:
Speaker
Aux Cable
Charging Cable
QR Code Guide
Wireless Microphone| :1U
:1U
:1U
:1U
:1U
---|---
Control panel Functions:-
-
Guitar Input Port
-
DC5V
-
Guitar Input’s Volume Control
-
AUX
-
USB Port
-
mSD Port
-
Echo Control
-
Mic Input Port
-
Button Description
-
Master Volume / Power ON/OFF
-
Real Time Voice Changer
-
Mode/Source Selection
-
Previous Track
-
Play/Pause
-
Next Track
-
RGB Light Control
-
Mic’s Volume Control
General Instructions:-
Button Function:
- Rotate the Volume knob clock wise to turn the speaker ON/OFF, also to increase / decrease the master volume.
- There are 5 voice effect presets you can apply to change how your voice sounds.
- Press MODE button to change the speaker’s input/source mode.
- Press Prev. button to skip to the previous track.
- Press Play/Pause button to play track or pause track being played.
- PressNextbutton to skip to the next track.
- Tochange LED modes or On/Off LED lights.
- Use MIC volume control knob to increase / decrease the MIC’s volume.
BT Mode:
- Power ON the speaker and you will hear the indication tone for the BT mode.
- Turn ON BT on your phone, tablet or laptop and search for the nearby BT compatible devices.
- Search for the BT name “ZEB-THUMP 300” andtaponitto connect.
Micro SD/ USB Mode:
- Once the speaker is ON, insert the micro SD card/USB drive into the respective ports of the “ZEB-THUMP 300” and the speaker will automatically detect the tracks from the USB drive/Micro SD card and plays MP3 files automatically.
- Press Prev./Next button to control the media.
TWS Function:
- Switch ON two “ZEB-THUMP 300” speakers you want to pair and make sure the secondary speakerisin BT discovery mode.
- Press&hold the Mode button for 5 seconds inany one speaker to activate TWS mode.
- Afterfewseconds, both the speakers willbe connected successfully.
- Now, search for nearby BT device in your mobile and Tap on the BT name “ZEB-THUMP 300″to connect.
- To exit TWS mode, Press & hold mode button for 5 seconds in any one speaker to exit from TWS mode.
Wireless Microphone:
- You can use the provided Type-C cable to charge the wireless microphone.
- The LED indication for mic’s charging would be flashing Red & Pink. After charging completes the indication light turns Red (glows constantly).
- Dedicated mute button and mic On/Off is present on the mic itself, for easy access.
- The wireless MIC connects to the speaker automatically once turned on.
- You can also use the ECHO and MIC. Vol knob to controlindividual volume accordingly.
AUXMode:
- Use the provided 3.5mm aux cable and plug it in the speaker’s aux port.
- Now connect the other end of the aux cable toany aux output audio source.
- After the speaker is turned ON, press the MODE button twice for AUX mode.
Note: Kindly follow the above steps before increasing the volume to avoid pops and cracks or sudden loud volume which might damage the speaker.
Charging the Speaker:
- Connect the charging cable to DC 5V port of the speaker and insert the other end into a DC 5V charging power source/adapter.
- LED blinks indicating that the battery is being charged.
- Red LED goes OFF after speaker gets fully charged.
ISO 9001:2015 Certified Company
www.zebronics.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>