ZEB AIO240AW Aio Cooler User Manual

ZEB AIO240AW Aio Cooler

Thank you for purchasing ZEB- AIO240AW / ZEB-AIO240AB AIO Cooler. Please read this user manual carefully and keep it for future reference.

Note

• Avoid the usage of this product at the high temperature and high humidity environment.
• Avoid the self-disassembly of the products or it results in the voiding the product’s Warranty.
• Please clean off the existing thermal compound which is present on the CPU and install the Included thermal compound for obtaining the best Cooling efficiency.

To know more about Terms and conditions for warranty policy, please visit
https://zebronics.com/pages/warranty-policy

Features

• 240mm AlO Cooler
• 67.96 CFM Fans
• Supported Intel Processors – LGA 115X / 1200 / 1366 / 17XX / 2011 / 2066
• Supported AMD Processors – FM3 / FM2 / FM1 / AM2 / AM2+ / AM3 / AM3+ / AM4 /
• AMS
• ARGB Sync
• ARGB CPU Block
• 2x120mm Fans

Specifications

**Fan Specs

**

PumP Specs

Dimensions of the Heatsink

** Dimensions of the CPU Block**

• 27.7 x 12.1 x 2.85 cm
• 8.6 x 7.31 x 5.14 cm

General Specs

• Product Weight :1.148Kg

Packaging Contents

Installation instructions

For Intel Setup
Assembling the CPU BLOCK

Step1:- Take the included Intel Mounting Bracket(C) and align with the Latching mechanism of the CPU Block.
Step2:- Slide the Intel mounting bracket (c) into the mounting Slot of the CPU block until the Intel mounting bracket cannot be moved any further(as shown in the reference image) .

Applying the thermal paste
Stepl:- Remove the existing Thermal compound which is present on the CPU
Step2:- Apply the included thermal paste on the CPU as per your CPU requirement
Step3:- Using the include Thermal paste spreader, Spread the applied thermal paste evenly on the surface of the CPU.
Step4:- Wipe of the excess Thermal compound which is present on the CPU. Now peel of the protective cover which is present under the conductive plate of the CPU Block.

MOUNTING THE CPU BLOCK

For LGA 1700 / LGA 1200/LGA115X models

Stepl:- Take the included Intel Mounting
Backplate(B), Adjust the mounting points according to your motherboard layout. Now align it to the rear side of the motherboard.
Step2: – Align the mounting studs(G3) to the motherboard as shown in the reference image. Fasten the Mounting studs to the Mounting bracket which is placed on the rear side of the motherboard.
Step3:- Align the CPU block to the mounting studs(G3) (as shown in the reference image)
Step4:- Align the mounting Nuts(G1) to the CPU block (as shown in the reference image).
Step5:- Using the required tools. Fasten the Mounting nuts(G1) along with the CPU block to the mounting Studs(G3) which is placed on the motherboard.

For LGA2011 model
Stepl:- Take the included Intel Mounting Backplate(B), adjust the mounting points according to your motherboard layout. Now align it to the rear side of the motherboard.
Step2:- Align the CPU block to the motherboard (as shown in the reference image).
Step3:- Align the mounting Screws(G4) to the CPU block (as shown in the reference image) –
Step4:- Using the required tools. Fasten the Mounting screws(G4) along with the CPU block to the mounting bracket(B) which is placed on the rear side of the motherboard.

Connection of AlO Cooler

Stepl:- Combine the 4 – pin fan connector of the AlO cooler together and Plug the combined 4 – pin Fan connector to the System fan header of the motherboard.
Step2:- Combine the 3 – pin ARB fan  connector and 3 – pin ARGB CPU Block connector. Now plug the Combined ARGB connector to the 3 – pin connector to the ARGB header of the Motherboard.
Step:3:- Connect the Power connector CPU Block connector to the CPU Fan Header which is present on the motherboard. Alternatively you can connect a fan controller to the connection setup which is provided in the package contents of the AlO cooler. Please follow the below connection diagram to fully utilize the fan controller.

Mounting the AlO Cooler setup

Stepl:- Align the Radiator block of the AlO cooler to the mounting points of the Gaming cabinet.
Step2:- Place the mounting screws on the mounting points of the AlO cooler.
Step3:- by using the required tools, Fasten the mounting screws to the AlO cooler via the cabinet. Ensure to apply pressure evenly for optimal placement

For AMD SETUP

Assembling the CPU BLOCK
Stepl:- Take the included Intel Mounting Bracket(C) and align with the Latching mechanism of the CPU Block.
Step2:- Slide the Intel mounting bracket (c) into the mounting Slot of the CPU block until the Intel mounting bracket cannot be moved any further(as shown in the reference image) .

AMDa
Combining the CPU Mounting brackets:

Stepl:- Align the AMD mounting brackets (D) To the CPU mounting points of the motherboards.
Step2:- Align the AMD mounting screws(G2). To the mounting points of the motherboard.
Step3:- Using the required tools, Fasten the AMD mounting screws into the mounting points of the motherboard via the AMD mounting plate (as shown in the Reference image).

Applying the thermal paste

Stepl:- Remove the existing Thermal compound which is present on the CPU
Step2:- Apply the included thermal paste on the CPU as per your CPU requirement.
Step3:- Using the include Thermal paste spreader, Spread the applied thermal paste evenly on the surface of the CPU.
Step4:- Wipe of the excess Thermal compound which is present on the CPU. Now peel of the protective cover which is present under the conductive plate of the CPU Block.

Mounting CPU Block
Stepl:- Align the intel screw stud to the mounting points of the AMD Mounting Bracket and fasten the mounting stud to the mounting points of the AMD bracket.
Step2:- Align the CPU block to the Intel screw studs. Now place the CPU block on the CPU via the mounting studs.
Step3:- Now align the Intel mounting Nuts to the Intel screw Stud and Fasten them with even pressure until the CPU block is intact

Connection of AIO Cooler
Stepl:- Combine the 4 – pin fan connectorof the AIO cooler together and Plug the combined 4 – pin Fan connector to the  System fan header of the motherboard.
Step2:- Combine the 3 – pin ARGB fan connector and 3 – pin ARGB CPU Block connector. Now plug the Combined ARGB connector to the 3 – pin connector to the ARGB header of the Motherboard.
Step:3:- Connect the Power connector CPU Block connector to the CPU Fan Header which is present on the motherboard. Alternatively you can connect a fan controller to the connection setup which is provided in the package contents of the AlO cooler. Please follow the below connection diagram to fully utilize the fan controller.

Mounting the AlO Cooler setup
Stepl:- Align the Radiator block of the AlO cooler to the mounting points of the Gaming cabinet.
Step2:- Place the mounting screws on the mounting points of the AlO cooler.
Step3:- by using the required tools, Fasten the mounting screws to the AlO cooler via the cabinet. Ensure to apply pressure evenly for optimal placement

Note:- Please use a compatible gaming cabinet to mount the AlO cooler. We suggest you to visit oue Below link to buy the optimal Gaming chassis for your AlO Cooler.
https://zebronics.com/collections/premium-gaming-chassis
ISO 9001:2015 Certified Company www.zebronics.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>