WavesRx PW CSOFTLOOPCLEATS 3 Soft Loops Jet Ski Cleats Installation Guide
- June 1, 2024
- WavesRx
Table of Contents
WavesRx PW CSOFTLOOPCLEATS 3 Soft Loops Jet Ski Cleats
INSTALLATION AND USE
The Waves Rx PWC Soft Loop Cleats streamline the process of Jet Ski mooring
and docking.
Designed for maximum flexibility and convenience, they add reliable connection
points to any PWC.
-
Locate Suitable Bolts
Begin by identifying existing bolts in the areas where you’d like to attach the Soft Loop Cleats. These bolts might be found under the seat, near the mirror, or beneath the front compartment cover. For optimal results, we suggest installing three loops-front, center, and rear-on each side of the ski.
-
Select the Appropriate Loop Size
Given the variation in trim and bolt placement across different PWC models, we’ve provided three soft loop sizes for enhanced compatibility: 3″, 5″, and 7″. When choosing a size for each placement, ensure that at least 2″ of the loop protrudes from beneath the seat, trim, or cover.
-
Install Under Trim or Use Washer
If the bolt is affixed to a plastic trim, it’s advisable to place the loop underneath the trim. If that is not an option, then you MUST USE a stainless steel washer (not included). Position the washer on top of the soft loop. This adds an extra layer of protection and reinforcement, ensuring the loop remains securely in place.
-
Use Orange Loop to Organize Storage
The orange loop is designed for the inside of your PWC’s front storage compartment. It provides a quick and convenient way to attach and store your ropes and bungees, ensuring they’re easily accessible during docking and anchoring.
CONNECTING YOUR BUMPERS AND DOCKING BUNGEES
After installing the loops, use them to securely attach docking fenders or bungee lines which will greatly simplify the PWC docking process. We recommend using hooks equipped with safety clips to minimize the risk of accidental detachment.
Customer Support
@WavesRx
www.WavesRx.com
[email protected]