MINISO 2BFF Smart Audio Glasses User Manual
- June 1, 2024
- MINISO
Table of Contents
MINISO 2BFF Smart Audio Glasses
Product Information
Specifications
- FCC Compliant: Yes
- Compliance: Part 15 of the FCC Rules
- Operation Conditions: Must not cause harmful interference and must accept received interference
Product Usage Instructions
Charging
Before first use, ensure the smart audio glasses are fully charged using
the provided charging cable.
Power On/Off
To power on the device, press and hold the power button for 3 seconds. To
power off, repeat the same process.
Pairing with Devices
Activate Bluetooth on your smartphone or other compatible devices. Press
and hold the Bluetooth button on the glasses to enter pairing mode. Select the
device on your phone and confirm pairing.
Playing Audio
Once paired, play audio on your device, and the sound will be transmitted
to the smart audio glasses for an immersive experience.
FAQ
-
Q: How long does the battery last?
A: The battery life varies based on usage but typically lasts around 6-8 hours on a full charge. -
Q: Can I make phone calls with the smart audio glasses?
A: Yes, you can make phone calls using the smart audio glasses as they have a built-in microphone and speaker.
Switch machine
- Power on, Press the button (the red point) on both sides for 3 seconds to tum on
- PoweroFP. Press the button (the red point) on both sides for 6 seconds to tum off
[Note: If there is SWNt on the glasses, it will affect the switching effect. please pay attention to clean it)
PAIRING
After the smart glasses are turned on, turn on the Bluetooth of the mobile
phone, search for the device name MINISO-088 and connect.
( Note : The smart glasses will automatically turn off when charging, and
automatically turn on when the charger is unplugged or fully charged. It will
automatically recognize the paired device and connect automatically.)
Note : After turning on any tample, you will be prompted in Chinese or English if you click on any of the temples 4 times in a row
Phone
- Answering a call /end call: press the button (left or right) 1 time
- Reject a call: press the button (left or right) for 2 seconds
( Note : the volume of the call can be adjusted on the phone)
**MUSIC
**
- Music pause/play: Press the button (left or right) 1 time
- Music switch: Press the button left 3 down to switch to the previous song
- Press the right button twice to skip to the next song
Volume
- Reduction: press the button on the left to reduce the volume increase: press the right button to increase the volume
( Note : The music volume can also be adjusted on the phone)
Remote camera
Remote control photo:First open the camera on the mobile phone, then press the glasses (left or right) button twice to take a remote photo
Voice assistance
- Wake up the voice assistant:press the button (left or right) 2 time
- Turn off voice assistant: Press the button(left or right) 1 time
Chinese and English switching
Chinese and English switching: press (left or right) 4 times
Recharge
Magnetic charging:the red light is always on when charging The blue light is always on when fully charged
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used by the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>