HUUM DROP Embedding Flange User Manual

June 1, 2024
HUUM

DROP Embedding Flange

DROPHUUM DROP Embedding Flange - Figure 1

Embedding Flange

  • Place the plates of embedding flange on the desired place of the boarding. Make sure that the end edges of the embedding flange are against the wall.
  • Mark the inner edge of the embedding flange on the boarding of the sauna platform.
  • Follow the marked line and draw the second contour 52 mm / 2 in outwards. We recommend using a 52 mm / 2 in wide wooden block for that purpose.
  • Cut the wider contour by following the aperture.
  • Attach the brackets of the embedding flange to the plates by using bolts and nuts.
  • Install the embedding flange to the cut aperture, adjust the cut edge, if necessary.
  • Attach the brackets to the boards of the platform with screws.
  • You can now install the DROP heater. Follow the minimum height from the figure below:
    Find the latest updates on our website www.huumsauna.com

HUUM DROP Embedding Flange - Figure 2

Made in Estonia, EU
info@huumsauna.com
huumsauna.com
#huumsauna
HUUM Sauna OÜ Vahi tee 9, Tartumaa 60534, Estonia

Documents / Resources

| HUUM DROP Embedding Flange [pdf] User Manual
H300102L03, DROP Embedding Flange, DROP, Embedding Flange, Flange
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals