HUUM H3254 CLIFF Protective Barriers

Specifications

Website: www.huumsauna.com
Address| Vähi tee 9, Tartumaa 60534, Estonia

Assembly Instructions

1. Place the support around three ribs of the heater in a way that the outer side of the support is in contact with the heater rod head.
2. Fix the support’s two sides with a bolt and a nut. Tighten the bolt so that the support fits snugly around the heater ribs.
3. Place all the 8 supports on the heater.
4. Connect wood parts using 4 metal plates.
5. Place the wooden railing on the supports and fasten with screws. Well done!

Maintenance Advice

Maintain the wooden parts of the guardrail with a breathable wood preservative to prolong its life. Use only products made for the sauna. Repeat the maintenance procedures at least once a year, but if you use the sauna often, you should also treat the wood more often.

Find the Latest Updates

Find the latest updates on our website www.huumsauna.com

FAQ

How many supports are needed for the heater? Eight supports are required for assembly. What tools are required for assembly? You will need a bolt and a nut to fix the support’s sides and metal plates to connect wood parts. How often should the wooden parts be maintained? Maintenance should be done at least once a year, or more frequently if the sauna is used often. Where can updates and additional information be found? Updates and additional information can be found on the HUUM website.

Product Certification

The product is certified with UKCA and CE markings, indicating compliance with applicable safety, health, and environmental protection standards in the European Union and the United Kingdom.

Illustration Description

The illustration shows an exploded view diagram of the CLIFF safety railing being assembled onto a sauna heater. It depicts various components such as supports, bolts, nuts, metal plates, and the wooden railing. The components are being assembled in a step-by-step sequence around the heater.

Product Components

• Bolts (x 8)
• Nuts (x 32)

PRODUCT OVERVIEW

Safety Railing

• Place the support around three ribs of the heater in a way that the outer side of the support is incontact with the heater rod head.
• Fix the support’s two sides with a bolt and a nut.Tighten the bolt so that the support fits snugly around the heater ribs.
• Place all the 8 supports on the heater.
• Connect wood parts using 4 metal plates.
• Place the wooden railing on the supports andfasten with screws. Well done!
• Maintain the wooden parts of the guardrail with abreathable wood preservative to prolong its life.
• Use only products made for the sauna. Repeat the maintenance procedures at least once a year, but
• if you use the sauna often, you should also treat the wood more often.
• Find the latest updates on our website www.huumsauna.com

Made in Estonia, EU
info@huumsauna.com
huumsauna.com

huumsauna

HUUM Sauna OÜ Vahi tee 9, Tartumaa 60534, Estonia

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>