smart-me Single Phase Meter User Guide

QUICK STARTER GUIDE
1-Phase Meter
SINGLE PHASE METER

Installation

 In order to use your smart-me device, it has to be connected with your Wi-Fi network.

1. Connect your smartphone or tablet to your Wi-Fi network.
2. Download and install the smart-me app.
3. Start the app and create a free smart-me account.
4. Press on «add device» (+) and follow the instructions.

Quick Start
Device overview
On the top left corner, you can find the device overview. The device overview shows all your smart-me devices. To change the structure of this view, visit the smart-me website.
Meter details
In order to open the detail view for one of your devices, click on settings in the top left corner and choose the respective device.
Load profile
To open the load profile, tap on the tile «power» in the detail view. The load profile shows the energy consumption in a defined period of time. For more reports and overviews visit the smart-me website.
Events and Actions
To configure the events and actions go to the device details, tab on settings (top right), and choose “Event-Actions”. You can define actions for some events on your smart-me device. Example: If:  power is higher than 500Watt, Then: switch power off.

Safety Instructions

• The device is intended for indoor use only. The device is intended for operation in a dry location that is free of dust and protected from direct sunlight.
• Frequent switching can shorten the service life of attached electrical consumers. Configure automatic switching at frequent intervals only if the connected consumers are designed for such an operation. No liability will be accepted for damage to attached consumers.
• When installing or replacing the device, all connecting wires have to be disconnected from the power source.
• Touching live components (supplied with voltage) is life-threatening! Therefore, the relevant fuses are to be removed and secured in a safe location. So, nobody is able to switch the power back on undetected.
• The installation of the device must be carried out by qualified and trained professionals.
• The usual local security and work rules must be kept at all times.

More Infos

More information:www.smart-me.com  
smart-me Wiki: doc.smart-me.com 

Connection Scheme

T1
Installation button  Taste für die Installation
T2
Tarif input (Digital)
Tarifumschaltung (DigitalerEingang)  0V tariff 1  24 – 230VAC/DC tariff 2
S0
Pulse output  (potential-free contact)  S0 Impulsausgang  (potentialfreier Kontakt)

Display

  T1|  Tariff 1 (blinks when active) [in kwh] Tarif 1 (blinkt, wenn aktiv) [in kWh]
---|---
T2| Tariff 2 (blinks when active) [in kwh] Tarif 2 (blinkt, wenn aktiv) [in kWh]
| current direction (right / left delivery)
Stromrichtung (rechts Bezug / links Lieferung)
| WLAN signal strength
WLAN Signalstärke
|  no WLAN available
kein WLAN gefunden

Display sequence
Counter T1 → Counter T2 → SW Version → CRC Value

 LETTENSTRASSE 9 | 6343 ROTKREUZ | SWITZERLAND
support@smart-me.com | +41 (0) 41 511 09 70
More information:
www.smart-me.com  
smart-me Wiki: doc.smart-me.com 

References

• smart-me wiki
• Wiki
• iCloud
• Energiemanagement mit smart-me - einfach, günstig, skalierbar
• smart-me wiki
• Wiki
• Energiemanagement mit smart-me - einfach, günstig, skalierbar
• Energy Management - easy, affordable, suitable for the mass

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>