ABILIA IR-REC8 Andromeda BED Cable Kit Installation Guide
- June 1, 2024
- ABILIA
Table of Contents
ABILIA IR-REC8 Andromeda BED Cable Kit
Product Specifications
- Article Numbers:
- Art. no. 419896: Cable kit (LINAK 10 PIN MODULAR)
- Art. no. 419897: Cable kit (LINAK 8 PIN DIN)
- Art. no. 419898: Cable kit (DEWERT 5 PIN DIN)
- Art. no. 419899: Cable kit (DEWERT 13 PIN DIN)
- Manufacturer: Abilia
- Locations:
- Abilia AB, Sweden
- Abilia AS, Norway
- Toby Churchill Ltd (Abilia), United Kingdom
Product Usage Instructions
Installation Guide
- Step 1: Remove the 10-pin terminal and the cable gland.
- Step 2: Pass the terminal fitted on the cable through the hole.
- Step 3: Tighten the cable gland securely.
- Step 4: Mount the terminal in place.
- Abilia AB, Kung Hans vag 3, Sollentuna, Box 92, 191 22
- Sollentuna, Sweden
- Phone: +46 (0)8-594 694 00 | Email: info@abilia.se | Website: www.abilia.se
Abilia AS, Tevlingveien 15, 1081 Oslo, Norway
- Phone: +47 23 28 94 00 | Email: info@abilia.no | Website: www.abilia.no
- Toby Churchill Ltd (Abilia), Toby Churchill House, Norman
- Way Industrial Estate, Over, Cambridge CB24 5OE, United
- Kingdom
- Phone: +44 (0)1954 281210 | Email: info@abilia.uk | Website: www.abilia.com
Document Revision: A | October 2016
Frequently Asked Questions (FAQ)
-
Q: How do I know which cable kit variant to choose for my Andromeda BED receiver?
A: Refer to the article numbers provided in the product manual to select the appropriate cable kit variant based on your receiver’s compatibility. -
Q: Can I use these cable kits with other bed receivers?
A: These cable kits are specifically designed for Andromeda BED receivers. Compatibility with other receivers may vary, so it is recommended to use them as intended.
Instruction
Gewa Andromeda IR-REC8 BED Cable Kit
Installation guide
Art.no 419896, 419897, 419898, 419899
Article number
| Art. no. | Name |
|---|---|
| 419896 | Cable kit (LINAK 10 PIN MODULAR) |
| 419897 | Cable kit (LINAK 8 PIN DIN) |
| 419898 | Cable kit (DEWERT 5 PIN DIN) |
| 419899 | Cable kit (DEWERT 13 PIN DIN) |
Installation guide
Follow the steps below to fit the cable kit to the Andromeda BED receiver.
- Step 1. Remove the 10-pol terminal and the cable gland.
Step 2. Pass the terminal fitted on the cable through the hole. 
- Step 3. Tighten the cable gland.
- Step 4. Mount the terminal.
Abilia AB, Kung Hans väg 3, Sollentuna, Box 92, 191 22 Sollentuna, Sweden Phone +46 (0)8-594 694 00 | info@abilia.se | www.abilia.se Abilia AS, Tevlingveien 15, 1081 Oslo, Norway Phone +47 23 28 94 00 | info@abilia.no | www.abilia.no Toby Churchill Ltd (Abilia), Toby Churchill House, Norman Way Industrial Estate, Over, Cambridge CB24 5QE, United Kingdom Phone +44 (0) 1954 281210 | info@abilia.uk | www.abilia.com
419896-99_Gewa Andromeda IR.REC8 BED Cable Kit Installation Guide_Rev4A .docx