ABILIA 451031 Mini Arm User Manual

June 12, 2024
ABILIA

Art. nr: 451030
Mini Arm
User Manual

Mini arm
Mini arm can be used to mount equipment such as holders for mobile devices and control switches.

Overview of Mini arm

Included parts

  • Mini arm

  • Adapter Mini arm 4/6
    For mounting Piko Button.

  • Mini arm Tube/Table clamp

  • Two set screws
    For locking Mini arm.

  • Hex key
    For tightening the set screws.

Use Mini arm

Lock Mini arm to the clamp

  1. Put the set screw into the hole on the side of the clamp.
  2. Tighten the set screw with the hex key.

Change the position of Mini arm

  1. Hold the equipment that is mounted on Mini arm.
  2. Loosen the joint of the arm.
  3. Change the position of the arm.
  4. Tighten the joint of the arm.

Technical data

Max. arm length 370 mm
Thread 6 mm
Max. gap for tabletop 40 mm
Min./max. pipe for clamp 15–40 mm
Max. load 400 gram

Maintenance

Clean Mini arm with a moist cloth and weak detergent. Mini arm can also be cleaned with a moist cloth and aluminium acetotartrate, chlorhexidine or ethyl alcohol. Dry Mini arm with a dry cloth.

Abilia AB, Råsundavägen 6, 169 67 Solna, Sweden
Phone +46 (0)8- 594 694 00 | info@abilia.com | www.abilia.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals