FUJITSU ASY20-KE Wall Mounted Type Air Conditioner Instruction Manual
- June 1, 2024
- FUJITSU
Table of Contents
FUJITSU ASY20-KE Wall Mounted Type Air Conditioner
Product Information
Specifications
- Model: Wall Mounted Air Conditioner
- Part Number: 9387858099-02
- Refrigerant Charge Quantity (kg):
- 1.22 for M ≤ 1.23
- 1.45 for 1.23 < M ≤ 1.50
- 2.15 for 1.50 < M ≤ 1.75
- 2.92 for 1.75 < M ≤ 2.0
- 3.82 for 2.0 < M ≤ 2.5
- 5.96 for 2.5 < M ≤ 3.0
- 8.59 for 3.0 < M ≤ 3.5
- 11.68 for 3.5 < M ≤ 4.0
Product Usage Instructions
Remote Control Setup
To set up the remote control:
- Remove the cover from the remote control.
- Insert two R03/LR03/AAA batteries as shown in the figure.
- Press the “RESET” button for 10 seconds to pair the remote control.
Operating the Air Conditioner
To start the air conditioner:
- Press the power button to start or stop the operation.
- Select the desired mode by pressing the mode button (AUTO, COOL, DRY, FAN, HEAT).
- Set the desired temperature using the temperature adjustment buttons.
Warnings and Cautions
- AVISO – This symbol indicates the risk of death or serious injury.
- CUIDADO – This sign alerts to the risk of injury or material damage.
Remote Control Accessories
- Remote control
- Remote control holder
- Self-tapping screws
- Batteries
- Air cleaning filters
- Deodorizing filter supports
Remote Control Installation
- Insert screws.
- Insert
- Slide upwards.
Cleaning and Maintenance
Interior Unit Body Cleaning
- Before cleaning the product, make sure to turn off the air conditioner and disconnect all power sources.
- Gently clean the interior unit body with a dry soft cloth.
Air Filter Cleaning
- Open the intake grille until it clicks.
- Remove the air filters.
- Remove dust in one of the following ways: using a vacuum cleaner or by washing with detergent and drying in the shade.
- Reinstall the air filters correctly.
- Close the intake grille. Make sure the intake grille is closed completely.
Deodorizing Filter Cleaning
- Remove the air filters. See the steps for “Air Filter Cleaning.”
- Remove the deodorizing filter from its support.
- Clean the deodorizing filter with a cloth soaked in lukewarm water.
- Dry the deodorizing filter in the shade.
Maintenance
Regularly clean the air filters and check for any blockages in the drainage
hose to ensure optimal performance.
Frequently Asked Questions (FAQ)
How do I change the operating mode?
Press the mode button on the remote control to cycle through different modes like AUTO, COOL, DRY, FAN, HEAT.
What should I do if the air conditioner is not cooling effectively?
Check if the air filters are clean and there are no obstructions in the air vents. Also, ensure that the temperature settings are appropriate for cooling.
How do I clean the air filters?
Open the intake grille, remove the air filters, clean them using a vacuum cleaner or by washing, then dry and reinstall them.
What should I do before cleaning the product?
Turn off the air conditioner and disconnect all power sources.
How often should I clean the air filters?
The air filters should be cleaned every 2 weeks.
What is the process for cleaning the deodorizing filter?
After removing the air filters, take out the deodorizing filter, clean it with lukewarm water, and dry it in the shade.
Is it necessary to use a service technician for any maintenance tasks?
For certain tasks such as repairing a refrigerant leak or any other task that requires disassembling the unit, a certified service technician should be consulted.