ROXX NRM01A104-1B Front Bumper for Dodge RAM Pickup Truck User Manual
- June 1, 2024
- ROXX
Table of Contents
ROXX NRM01A104-1B Front Bumper for Dodge RAM Pickup Truck
Product Information
Specifications
- Model: NRM01A104-1B
- Material: Q235A
- Product Dimensions: 45.6 x 8.1 x 8.9 inches
- Package Dimensions: 48.5 x 12.2 x 10.6 inches
- Product Weight: 42.8 lbs
Product Usage Instructions
Required Tools
- Ratchet
Parts Information
| No. | Parts Name | Size | Qty | Color |
|---|---|---|---|---|
| / | Mid Bumper | 1 | Black |
Installation Instructions
- Step 1: Open the carton and check the components.
- Step 2: Remove the original bumper.
- Step 3: Install the brackets following the specified sequence.
Frequently Asked Questions (FAQ)
Q: Do I need any additional tools for installation?
- A: The required tool for installation is a ratchet.
Specifications
| Model: | NRM01A104-1B |
|---|---|
| Material: | Q235A |
| Product Dimensions: | 45.6 x 8.1 x 8.9 inch |
| Package Dimensions: | 48.5 x 12.2 x 10.6 inch |
| Product Weight: | 42.8 lbs |
- Thank you for purchasing the FRONT BUMPER Mid Bumper. Please read this manual carefully and keep it properly if you need to refer to it afterward.
- If you need any support or assistance, please contact us with your product model number and order number, and our support team will help you solve your problems.
WARNING
- This product is designed primarily to enhance the appearance of the vehicle. Do not rely in any way on the components of this product to protect against injury or death in the event of an accident.
- To reduce the risk of serious injury or property damage, please read all safety messages and understand all instructions and procedure notices before attempting to install or use this product.
CAUTION
- Properly torque and recheck fasteners and security of step tread after 250 miles and inspect frequently. Do not use if damaged.
REQUIRED TOOLS
Parts Information
Note: spare parts such as B07、N09、W22、W23、B35、N15、B24、N11 are provided with 1PCS each (included in the number of parts details).
Installation Instructions
- Step 1: Open the carton and take out the parts. Check whether the number of components is complete.
- Step 2: Remove the original bumper and prepare the parts needed to install the bumper.
- Step 3: Install the brackets.
- Step 4: Install the Radar Probe.
- Note: If the car does not have a radar probe, this step can be ignored.
- Note: If the car does not have a radar probe, this step can be ignored.
- Step 5: Install the Mid Bumper.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>