BANWOOD BW-SKB Children’s Skateboard Instruction Manual

: June 1, 2024
: BANWOOD

Table of Contents

BANWOOD BW-SKB Children’s Skateboard
Product information
Product Usage Instructions
Safety Precautions
USE
MAINTENANCE
SAFETY NOTES
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

BANWOOD BW-SKB Children’s Skateboard

BANWOOD-BW-SKB-Children-s-Skateboard-PRODUCT

Specifications

Compliance: EN 13613:2009 & ASTM F963
Max Weight Capacity: 100kg / 220 lbs
Model Number: BW-SKB
Manufactured in Dongguan, China
Designed in Sweden

Product information

The skateboard is designed for recreational use and transportation. It is built with high-quality materials to ensure durability and safety during use.

Product Usage Instructions

Safety Precautions

Before using the skateboard, make sure to wear appropriate safety gear such as helmets, knee pads, and elbow pads.
Skateboarding can be dangerous, so always prioritize safety.

Assembly

Check that all components are securely attached before riding.
Ensure the wheels are tightened properly and the trucks are adjusted according to your preference.

Riding

Mount the skateboard by placing one foot on the deck and pushing off with the other foot.
Maintain balance and control while riding, and practice turning and braking techniques in a safe environment.

Maintenance

Regularly inspect the skateboard for any signs of wear or damage.
Keep the bearings clean and lubricated for smooth performance. Replace any worn-out parts promptly.

FAQ

Q: Can children use this skateboard?

A: The skateboard is suitable for users weighing up to 100 kg / 220 lbs, so it can be used by children and adults alike. However, children should always be supervised while skateboarding.

Q: How do I clean the skateboard?

A: Use a damp cloth to wipe down the deck and trucks. Avoid getting water on the bearings as it can cause damage. For thorough cleaning, disassemble the skateboard and clean each component separately.

Q: What should I do if the wheels are making noise?

A: Check if the wheels are properly tightened. If the noise persists, remove the wheels and clean the bearings. Apply lubricant if necessary to reduce friction and noise.

Please read this user manual carefully before putting the skateboard into operation and keep the instructions for future use.

USE

The skateboard should be used in a ﬂat and dry place. Before skating, make sure no holes, pits, rocks, or hollows that can cause a fall and damage the board.
Avoid skate on the streets and sidewalks, as well as slippery and damp surfaces.
Wear appropriate protectors: knee pads, elbow pads, wrist pads, and a helmet.
Checked the steering mechanism is properly regulated and all parts are ﬁrmed attached, check that the wheels are securely fastened.
To get-go with the skateboard, place one foot in the middle of the board and keep the other foot on the ground.
Push oﬀ the ground with your foot and propel yourself forward.
No braking mechanism on the skateboard, you have to get oﬀ the board when your speed increases excessively.

MAINTENANCE

Regular maintenance can help with the skateboard’s safety and lifecycle.
It’s necessary to maintain the bearings regularly, they’re self-lubricating, so clean them with a dry cloth externally.
Before each use, inspect the truck and wheels carefully, if the wheels tilt to the side, check that they are well fastened.
Remove all sharp edges caused by use.
Regularly check your skateboard’s general condition and wear.
Check your board, if any cracks or splinters are visible, the skateboard is not suitable for further use and should be replaced.
Regularly check the condition of the wheels. Excessive wear of the wheels will reduce the skateboard’s performance and safety. The wheels can only be replaced with new, identical wheels provided by the manufacturer.
Do not make any modiﬁcations that are contrary to the instructions.
The self-protecting nuts and other self-protecting elements should be replaced if they are damaged or rusty. For safety reasons, one-time use of the self-locking nut is recommended.
When skating on an uneven surface, vibrations may occur, which could cause the self-protection elements to get loose, this can reduce product safety and security.

SAFETY NOTES

Use the product in a suitable location and avoid using it in areas where accidents have already occurred. (When practicing, avoid areas where others are using it and avoid all possible accidents)
Children under 8 years old, use the product under adult supervision.
In case of loss of balance, don’t wait to fall, jump oﬀ the skateboard in time, stop, and start again.
Start using the skateboard from a ﬂat area or small slope, and jump oﬀ the skateboard on time before the speed becomes too fast.
In the beginning, you learn to fall safely (preferably rolling your body on the ground), the most serious injury from a fall from a skateboard is a fracture.
Beginners should use skateboards under the supervision of parents or friends.
When jumping oﬀ the skateboard, make sure it slides in a direction that does not cause harm to others.
This skateboard is not suitable for stunts and is intended for recreational sports only.
Before getting oﬀ the skateboard, the speed should be reduced. When the skateboard is stopped, ﬁrst place one foot and then the second foot on the ground.
To acquire new skateboarding skills, sign up for a skateboard club. Take care of your own and others’ safety at all times.
CAUTION Skateboards can be dangerous.
13613:2009 & ASTM F963
MAX: 100Kg / 220lbs
MODEL NO.: BW-SKB MANUFACTURED IN DONGGUAN, CHINA DESIGNED IN SWEDEN
BANWOOD S.L C.I.F:B-56079262
Avd. del Gran Capitán 19, 2ºD, 14008 Córdoba (Spain) 0034-957 049 536
www.banwood.com
info@banwood.com