Femicgal C1399-1 Digital Display Tire Inflator User Manual
- June 1, 2024
- Femicgal
Table of Contents
Femicgal C1399-1 Digital Display Tire Inflator
Product Information
Specifications
- Rated Voltage: 12V
- Rated Current: 10A
- Rated Power: 120W
- Material: ABS+PP+Copper
- Noise Level: 75db
- Continuous Working Time: 30 minutes
- Air Flow: 35L/min
- Cylinder Specifications: 22mm (0.08in)
- Output Air Pressure: 150PSI
Product Usage Instructions
- Connect the device to a 12V power source.
- Select the appropriate nozzle for your tire valve.
- Turn on the device.
- Set the desired pressure level on the gauge.
- Attach the nozzle to the tire valve and secure it in place.
- Switch on the inflator to start the inflation process.
- Monitor the pressure gauge and stop when the desired pressure is reached.
- Disconnect the inflator from the tire valve and turn off the device.
Frequently Asked Questions (FAQ)
Q: How long does it take to inflate a 195/65 R15 tire from 0 to 35psi?
A: The inflation time may vary depending on factors such as tire size and
current pressure. It is recommended to monitor the pressure gauge during
inflation to ensure accurate results.
DIGITAL DISPLAY TIRE INFLATOR
USER MANUAL
Before using the product, please read this instruction manual carefully and
keep it in a safe place for future reference.
Precautions
- This product is not a toy, and it is forbidden for children to use it. lt is recommended that users should be at least 16 years old, and please keep a safe distance from children during use.
- The product has a built-in dc motor, which may generate electric sparks when working. please do not use it in an flammable and explosive environment.
- lfabnormal noise or high temperature occurs during work, please shut down immediately.
- Before setting the inflation pressure value, please confirm the correct measurement unit is selected, otherwise it may cause a tire burst for accidents,the common unit conversion is:(1BAR=14.5 PSI,1 BAR=100 KPA,1BAR=1.02kg/cm2).
- Do not leave when inflating, and observe the inflation process to prevent the inflationpressure from being too high.
- Keep the power cord plug of this product away from liquids such as water.
- Please check the product accessories according to the instructions, if there are any missing, please contact us.
Component names
Parts list
Digital tube diagram
Product parameter
| Rated Voltage | 12V | Material | ABS+PP+Copper Motor |
|---|---|---|---|
| Rated Current | 10A | Line Length | 3M(9.84FT) |
| Rated Power | 120W | Noise | 75db |
| Continuous Working Time | 30min | Air Flow | >35L/min |
| Cylinder Specifications | 22MM(0.08in) | Output Air Pressure | 150PSI |
Product recommended inflation pressure gauge
The recommended inflation pressure is for reference only. Please refer to the Instruction manual of the product to be inflated for specific inflated pressure
Inflation time
- Inflate a 195/65 R15 tires from 0 to 35psi Inflation time <5 minutes
- Inflate a 700*23C tires of bikes from 0 to 120psi Inflation time <1 minute
- Inflate a 26*195 tires of mountain bike tire from 0 to 55psi Inflation time <1 minute
- Inflate a size 5 Football from 0 to 5psi Inflation time <30 seconds
The inflation time is for reference only.
Steps for usage
- Start the car, insert the plug of the power cord into the cigarette lighter socket in the car, and make sure it is connected in place.
- Install the inflation tube, connect the product at the screw cap, connect the air nozzle to the tire, after connecting the tire, the display will display the current tire pressure of the tire.
- Set tire pressure: “R” key is the unit conversion key, press “-” or “+” at will to preset tire pressure.
- After the tire pressure is preset, press the power button to start inflation.
- Tire inflator will stop working automatically when the tire pressure reaches a preset value.
- Last step, when everything is done, press the “switch” button to turn off the power and unplug the power cord.
Types of failures and treatment methods
If you have any other questions, please contact us in time
Brand Name: Femicgal
Manufacturer: YIWU POWER TIGER AUTO ACCESSORY CO.LTD Address: Building
No.4,Area A Shuangchuang Street,
E22 XinKe Road,Choujiang Community,Yiwu,China
WEB: https://femicgal.net
E-mail: services@femicgal.net
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>