ROBE 42 LED-based Moving Lights User Manual

ROBE 42 LED-based Moving Lights

Specifications

• Product Name: TetraX
• Version: 1.4
• Usage: Indoor
• Power Requirements: Check voltage on bottom of fixture
• Safety Class: Class I

Product Usage Instructions

1. Safety Instructions:

It is crucial to follow the safety instructions provided in the user manual to ensure safe operation of the device.

• Qualified Personnel: Only qualified individuals should be involved in the installation and maintenance of the device.
• Disconnect Power: Always unplug the mains lead before opening the housing or removing any covers to prevent electric shock.
• Power Cord Maintenance: Check the power cord for damage regularly and ensure it is not crimped by sharp edges.
• Grounding: Connect the yellow/green conductor to earth as the device falls under protection class I.
• Repairs and Servicing: All electric connections, repairs, and servicing must be carried out by qualified employees.

2. Operating Determination:

The TetraX device is designed for indoor professional use only to create decorative effects.

If the device has been exposed to drastic temperature changes, allow it to reach room temperature before switching it on to prevent damage due to condensation.

3. Additional Safety Precautions:

• Do not touch the device’s housing with bare hands during operation as it becomes hot.
• Avoid looking directly into the beam emitted by the LED light source to prevent eye injury.
• Lock the moving head in a horizontal position using the pan lock before manipulation.
• Avoid putting fingers under the moving head to prevent injury during operation.

Frequently Asked Questions

• Q: Can this device be used outdoors?
  • A: No, this device is designed for indoor use only.
• Q: How should I handle condensation on the device?
  • A: If condensation occurs due to temperature changes, allow the device to reach room temperature before switching it on.
• Q: What precautions should I take when cleaning or servicing the unit?
  • A: Always disconnect the power input cable before cleaning or servicing the unit to ensure safety.

“`

CAUTION! Keep this device away from rain and moisture! Unplug mains lead before opening the housing!
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOU INITIAL START – UP!

Safety instructions

Every person involved with installation and maintenance of this device have to: – be qualified – follow the instructions of this manual
CAUTION! Disconnect the fixture from mains before you remove any cover of the fixture. With a high voltage you can suffer a dangerous electric shock when touching
alive wires and electrical parts under covers!
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this manual.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the device.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
Make sure that the available voltage is not higher than stated on the bottom side of the fixture.
WARNING! This unit does not contain an ON/OFF switch. Always disconnect power input cable to completely remove power from unit when not in use or before cleaning or servicing the unit.
Make sure that the power cord is never crimped or damaged by sharp edges. Check the device and the power-cord from time to time.
Always disconnect from the mains, when the device is not in use or before cleaning it.
This device falls under protection class I. Therefore it is essential to connect the yellow/green conductor to earth.
The electric connection, repairs and servicing must be carried out by a qualified employee.
Do not connect this device to a dimmer pack. For replacement use fuses of same type and rating only.
The fixture becomes hot during operation. Do not touch the device’s housing bare hands during its operation. Allow the fixture to cool approximately 30 minutes prior to
manipulate with it.
LED light emission. Risk of eye injury. Do not look into the beam at short distance of the of the product. Do not view the light output with optical instruments or any device
that may concentrate the beam. The light source contains blue LEDs.
CAUTION! Risk group 2, RG-2
3

Prior to manipulate the fixture, lock its moving head in a horizontal position by means of the pan lock.
Be careful when the fixture performs fast pan rotation. There is a danger of injury of your hands (especially fingers). Danger of injury! Danger area when:- pan continually rotates
– you touching the graphic screen (and the fixture is under voltage) – you connect cables (and the fixture is under voltage)
Danger of injury! Do not put your fingers under the moving head!
4

Operating determination

This device is a moving line for creating decorative effects and was designed for indoor use only.
This device is for professional use only. It is not for household use.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
Avoid brute force when installing or operating the device.
When choosing the installation spot, please make sure that the device is not exposed to extreme heat, moisture or dust!
Make sure that the area below the installation place is blocked when rigging, de-rigging or servicing the fixture.
Always secure the fixture with an appropriate safety wire.
To avoid damage of an internal optical system of the fixture, never let the sunlight (or other light source) lights directly to the lens array, even when the fixture is not working
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons.
If this device will be operated in any way different to the one described in this manual, the product may suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-circuit, burns, electric shock etc.
The product (covers and cables) must not be exposed to a high frequency electromagnetic field higher than 3V/m.
Immunity of the equipment is designed according to the standard EN 55035 Electromagnetic compatibility of multimedia equipment – Immunity requirements
Emission of the equipment complies with the standard EN55032 Electromagnetic compatibility of multimedia equipment ­ Emission Requirements according to class B.
Contains FCC ID: 2A6PL-DMXRDMRW001 Contains IC: 29573-DMXRDMRW001 * Wireless DMX version of the fixture only.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The [Device] wireless operation is safe and complies to RF Exposure requirements
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
5

Fixture exterior view

1 – Moving head 2 – Pan lock 3 – Holders 4 – Cotrol buttons 5 – QVGA touch screen 6 – Fuse holder 7 – Power IN (PowerCon True 1)

8 – Power OUT (PowerCon True 1) 9 – DMX IN (5-pin XLR) 10 – DMX OUT (5-pin XLR) 11 – Ethernet IN
12- Ethernet OUT
13- Attachment point for safety wire
14- Omega holders

The head has to be locked for transportation – the pan lock latch (2) has to be in the locked position. To unlock the head, move the latch to unlock position before operating the fixture.

6

Installation

Fixtures must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations.

4.1 Connection to the mains
For protection from electric shock, the fixture must be earthed!

The Robin TetraX is equipped with auto-switching power supply that automatically adjusts to any 50-60Hz AC power source from 100-240 Volts.

If you install a cord cap on the power cable to allow connection to power outlets, install a grounding-type (earthed) plug, following the plug manufacturer’s instructions.
The cores in the power cable are coloured according to the following table.

Core (EU) Brown Light blue Yellow/Green

Core (US) Black White Green

Connection Plug Terminal Marking

Live

L

Neutral

N

Earth

This device falls under class one and must be earthed (grounded)! To apply power, first check that the tilt locks is released. Design of the ROBIN TetraX allows to connect several fixtures to AC mains power in one interconnected daisy chain using power input and throughput connectors. Needed daisy chain cords are stated in the chapter
“Technical specifications ” Maximum number of linked fixtures depends on input voltage:

CE:
11 fixtures at power supply= 230V 10 fixtures at power supply= 208V 5 fixtures at power supply= 120V

US:
9 fixtures at power supply= 230V 8 fixtures at power supply= 208V 4 fixtures at power supply= 120V

Real numbers of fixtures may differ from values stated above as you have to take into account the length of supply cables, circuit breaker etc. at projecting of the fixtures installation Do not overload the supply line and connecting leads.

7

4.2 Rigging the fixture
A structure intended for installation of the fixture (s) must safely hold weight of the fixture(s) placed on it. The structure has to be certificated to the purpose. The fixture (fixtures) must be installed in accordance with national and local electrical and construction codes and regulations.
. For overhead installation, the fixture must be always secured with a safety wire that
can bear at least 10 times the weight of the fixture.
When rigging, derigging or servicing the fixture staying in the area below the installation place, on bridges, under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an expert before taking into operation for the first time and after changes before taking into operation another time. The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled person once a year.
Allow the fixture to cool for 30 minutes before handling. IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including calculating working load limits, installation material being used, and periodic safety inspection of all installation material and the projector. If you lack these qualifications, do not attempt the installation yourself, but use a help of professional companies.
CAUTION: Fixtures may cause severe injuries when crashing down! If you have doubts concerning the safety of a possible installation, do not install the fixture! The fixture has to be installed out of the reach of public. The fixture must never be fixed swinging freely in the room.
Danger of fire ! When installing the device, make sure there is no highly inflammable
material (decoration articles, etc.) in a distance of min. 0.5 m.
CAUTION! Use 2 appropriate clamps to rig the fixture on the truss.
Make sure that the device is fixed properly! Ensure that the structure (truss) to which you are attaching the fixtures is secure.
The fixture can be placed directly on the stage floor or rigged in any orientation on a truss without altering its operation characteristics .
For securing the fixture to the truss, install a safety wire which can hold at least 10 times the weight of the fixture. Use only the safety wire with a snap hook with screw lock gate.
8

Truss installation 1. Bolt rigging clamps (1) to the omega holders (2) with M12 bolts and lock nuts through the holes in the holders. 2. Fasten the omega holders to the bottom of the base by inserting both quick-lock fasteners (3) into
the holes of the base and tighten fully them clockwise. 3. Clamp the fixture on the truss (4) and tighten the rigging clamps. 4. Pull one safety wire (5) around the truss (4) and through the handle (7) and lock the snap hook with screw lock gate in the attachment point (6).
Avoid illuminating one fixture with another! In order to protect the internal parts of the head from the sun, the function PARKING POSITION must be switched ON before switching the fixture off.
The PARKING POSITION function is located on the Power/Special functions channel (120-129 DMX). If the function is on, the fixture will automatically detect via G-sensor whether the fixture is on the floor or hangs on the truss and tilts the moving head to the position in which the moving head will always face down. Owing this position of the moving head, there is not chance to burn internal parts of the LEDs array by the sun light.
9

4.3 DMX-512 connection

The fixture is equipped with 5-pin XLR sockets for DMX input and output. Only use a shielded twisted-pair cable designed for RS-485 and 5-pin XLR-plugs and connectors in order to connect the controller with the fixture or one fixture with another.

DMX output

DMX input

XLR socket:

XLRplug:

1 – Shield 2 – Signal (-) 3 – Signal (+) 4 – Not used
5 – Not used

1 – Shield 2 – Signal (-) 3 – Signal (+) 4 – Not used
5 – Not used

Building a serial DMX-chain.
Connect the DMX output of the first fixture in the DMX chain with the DMX input of the next fixture. Always connect one output with the input of the next fixture until all fixtures are connected. Up to 32 fixtures can be connected. Caution: At the last fixture, the DMX cable has to be terminated with a terminator. Solder a 120 resistor between Signal (­) and Signal (+) into a 5-pin XLR plug and plug it in the DMX output of the last fixture.

10

4.4 Ethernet connection
The fixtures on a data link are connected to the Ethernet with appropriate communication protocol (e.g. Art-Net). The control software running on your PC (or light console) has to support Art-Net protocol. Art-Net communication protocol is a 10 Base T Ethernet protocol based on the TCP/IP.Its purpose is to allow transfer of large amounts of DMX 512 data over a wide area using standard network technology.

IP address is the Internet protocol address.The IP uniquely identifies any node (fixture) on a network. The Universe is a single DMX 512 frame of 512 channels.

The Robin TetraX EP is equipped with 8-pin RJ- 45 sockets for Ethernet connection. Use a network cable ca-

tegory 5 (with four “twisted” wire pairs) and standard RJ-45 plugs in order to connect the fixture to the network.

RJ-45 socket (front view):

RJ-45 plug (front view):

1- TD+

5- Not connected

2- TD-

6- RX-

3- RX+

7- Not connected

4- Not connected

8- Not connected

Patch cables that connect fixtures to the hubs or LAN sockets are wired 1:1,that is,pins with the same numbers are connected together:
1-1 2-2 3-3 4-4 5-5 6-6 7-7 8-8 If only the fixture and the computer are to be interconnected,no hubs or other active components are needed.A cross-cable has to be used:
1-3 2-6 3-1 4-8 5-7 6-2 7-5 8-4

If the fixture is connected with active Ethernet socket (e.g. switch) the network icon bottom right corner of the screen:

will appear at the

Ethernet operation
Connect the Ethernet inputs of all fixtures with the Ethernet network. Option “Artnet (gMaI or gMA2 or sACN)” has to be selected from “Ethernet Mode” menu on the fixture. Set IP address (002.xxx.xxx.xxx / 010.xxx.xxx.xxx) and the Universe. Example of connection:

(DMX address=213) IP addres=002.168.002.008 Universe=1

(DMX address=169) IP addres=002.168.002.004 Universe=1

(DMX address=43) IP addres=002.168.002.003 Universe=1
(DMX address=1) IP addres=002.168.002.002 Universe=1

An advised PC setting: IP address: 002.xxx.xxx.xxx / 010.xxx.xxx.xxx (Different from fixture IP addresses) NET mask: 255.0.0.0
The fixture is equipped with Ethernet Pass Through Switch which sustains Ethernet integrity, when the fixture has no power, it automatically maintains network connectivity. If you use the Ethernet IN-OUT way for the Ethernet connection, max. 8 fixtures can be connected in the IN-OUT line.
11

Ethernet / DMX operation Option “Ethernet to DMX” has to be selected from the “Ethernet Settings” menu on the first fixture (connected to the Ethernet) in the fixture chain,next fixtures have standard DMX setting. Connect the Ethernet input of the first fixture in the data chain with the network. Connect the DMX output of this fixture with the input of the next fixture until all fixtures are connected to the DMX chain. Caution: At the last fixture, the DMX chain has to be terminated with a terminator. Solder a 120 resistor between Signal (­) and Signal (+) into a XLR plug and connect it in the DMX output of the last fixture. Example:
(DMX address=169)
(DMX address=43)
DMX address=1 IP addres=002.168.002.002 Universe=0
(DMX address=169)
(DMX address=43)
DMX address=1 IP addres=002.168.002.002 Universe=1
12

4.5 Wireless DMX operation
The wireless DMX version of the fixture is equipped with ROBE wireless DMX/RDM module, The module has full support for wireless communication protocols at entertainment market. Modul is based on well known LumenRadio RF technology, with implemented wire interface for connection with Robe products. RF output for MCX interface antenna as standard output. The item ” Wireless ” from the menu “DMX Input” allows you to activate receiving of wireless DMX (Personality–> DMX Input –>Wireless.). First two options from the “DMX Input” menu are stated in DMX chart as well (channel Power/Special functions , range of 10-19 DMX). If DMX input option is changed by DMX command, the change is permanently written into fixture´s memory. DMX range of 10-19 switching fixture to the wired/wireless operation is active only during first 10 seconds after switching the fixture on. After switching the fixture on, the fixture checks both modes of receiving DMX in the following order: 1. For the first five seconds, the fixture receives DMX signal from the wired input. If the Power/Special functions channel is set at some DMX input option, the fixture will receive DMX value according to this option. If DMX input option is set to the wired input , this option is saved and checking procedure is finished. If DMX input option is not set, the fixture continues next 5 seconds in scanning wireless DMX signal-see point 2. 2. For the next 5 seconds the fixture receives wireless DMX signal and again detects if the Power/Special functions channel is set at some DMX input option, if not, the fixture will take option which is set in the fixture menu “DMX Input”. To link the fixture with DMX transmitter. The fixture can be only linked with the transmitter by running the link procedure at DMX transmitter . After linking , the level of DMX signal ( 0-100 %) is displayed in the menu item “Wireless State” (Information –>Wireless State). To unlink the fixture from DMX transmitter. The fixture can be unlinked from receiver via the menu item ” Unlink Wireless Adapter” (Information–> Wireless State –> Unlink Wireless Adaptor). Note: If the option “Wireless In/XLR Out” is selected (Personality–> DMX Input –>Wireless In/XLR Out), the fixture receives wireless DMX and sends the signal to its wired DMX output. The fixture behaves as ” Wireless/ Wired” adaptor. Example of connection:
13

Remotely controllable functions

Virtual colour wheel This wheel contains 66 preset colours, rainbow effect with/without fade time.
Colour temperarature correction (CTC) This channel allows to set calibrated white colour from range of 8000K-2700K.
RGBW or CMY colour mixing system The RGBW colour mixing system is based on red, green, blue and white high power LEDs. Option for switching the fixture to the CMY colour mixing system is also available.
Colour Mix control The Colour Mix control channel defines relation between global colours (RGBW, CTO, Virtual colour wheel) and individual RGB pixels or Kling-Net.
Global = Global Colours (RGBW, CTO, Virtual Colour Wheel) Pixel = Pixel Colors (RGB individual pixels or Kling-Net)

DMX value

Function

0-9

Global colours (Global has priority)

10-19

Maximum mode (highest values have priority)

20-29

Minimum mode (lowest values have priority)

30-39

Multiply mode (multiply Global and Pixel)

40-49

Addition mode (Global + Pixel) – default

50-59

Subtraction mode (Global ­ Pixel)

60-69

Inverted Subtraction mode (Pixel ­ Global)

70-79

Coloured background

80-127

Reserved

128

Global colours (Global has priority)

129-254

Crossfade (crossfade between Global and Pixel)

255

Pixel colours (Pixel has priority)

E.g. If you wish to control RGBW channels, set the Colour Mix Control channel to 0 DMX, if you

need to use pixel effects, set the Colour Mix Control channel to 255 DMX.

Multi-Coloured Flower Effects Three Multi-Coloured Flower Effects rotating in both directions at variable speed create spectacular multicolour beam effects in the air.
Zoom Motorized zoom offers beam range of 4° – 45°.
Pixel control 9 RGB pixels allow you to create many effects or use pre-defined pixel effects.
Dimmer/Shutter unit Imperceptible 18 bit dimming 0 – 100 % for ultra smooth fade to black Strobe effects with variable speed.
Pan/Tilt Precise pan/tilt movement in range of 540/191°.
Direction of pan/tilt movement and pixel order:

Multi-coloured flower effects are placed at pixel positions 2, 5, 8.
14

Control menu map

Default settings=Bold print

Tab

Level 1

Level 2

Addressing –

Settings

DMX Address DMX Preset

Ethernet Settings

Level 3
001-512
Mode 1, Mode 2, Mode 3, Mode 4 Mode 5, Mode 6
Ethernet Mode

Level 4
Disable ArtNet gMAI gMA2 sACN

Level 5

Level 6

Ethernet To DMX IP Address/Net Mask
ArtNet Universe MANet settings sACN Settings Klingnet Settings

Off, On Default IP Address Custom IP Address Net Mask 0-255 MANetI/II Universe MANet Session ID sACN Universe sACN Priority Disable Enable

01-256 01-32 00001-32000 0-255

Information

Fixture Times Fixture Temperatures
DMX Values Wireless State Power Channel State Software Versions
Product IDs View Logs

Power On Time

Total Hours

Resetable Hours

Air Filters

Elapsed Time

Alert Period

LEDs Temperature Current

Maximum NonRes.

Maximum Res.

Base Temperature

Current

Maximum NonRes.

Maximum Res.

Pan

:

White Pixel 9

Signal Quality

Unlink Wireless Adapter

Display System Module M Module DR Module PX Wireless Mac Address RDM UID RDM Label Fixture Errors Fixture States
Fixture Position Fixture Temperatures

Power On Power Off
LEDs Temperature Base Temperature

10-300

15

Tab Personality

Level 1

Level 2

Level 3

DMX Presets

Mode 1

Mode 2

:

Mode 6

View Selected Preset

DMX Input

Wired Input

Wireless Input

Wireless In/XLR Out

Pan/Tilt Settings

Pan Reverse Tilt Reverse Pan/Tilt Feedback

Off, On Off, On Off, On

Pan/Tilt mode

Time

Speed

Pixel Control

Pixel Index

0-8

Pixel Mirror Reset to default

On, Off

Microphone Sen- 1-10-20 sitivity

Blackout Settings

Blackout During M.C. Off, On

Blackout while:

Pan/Tilt moving

Colour Mixing Mode

RGBW

CMY

White Point 8000K Off, On

Automatic white pixel
Tungsten Eff. Sim.

Off, On Off

750W

1000W

1200W

2000W

2500W

Dimmer Curve

Linear

Square Law

L E D S O u t p u t Standard

Frequency

High

LEDs Frequency -6….0….+6 Adjust
Init Effect Positions Pan

0-255

:

Dimmer Fine

0-255

Screen Settings

Display Intensity

1-10

Screen Saver Delay Touchscreen Lock Recalibrate Touchscreen

Off-10min. Off-10min.

Display Orientation Normal

Inverted

Auto

Temperature Unit °C,°F

Fan settings

Fan Mode

Auto

High

Quiet

Quiet-Blackout Fan Off, On Off

Date & Time Settings

Default Settings

Level 4 Off, On

16

Level 5

Level 6

Tab Manual Control
Stand -Alone

Level 1

Level 2

Reset Functions

Total System reset

Pan/Tilt reset

Zoom Reset

Flower E. Reset

Manual Effect Con- Pan trol

:

White Pixel 9

Test Sequences

Dynamic Mode

Static Mode

MusicTrigger Preset Playback
Play Program Edit Program

Off, On None Test Prog. 1 Prog. 2 Prog. 3 Play Program 1 Play Program 2 Play Program 3 Edit Program 1

Level 3

Level 4

0-255
0-255 Pan, Tilt Zoom

0-255 0-255

Start Step End Step Edit Program Steps

1-88 1-88 Step 1 : : : Step 88

Service

Adjust DMX Values Calibrations
Update Software

Pan

0-255

:

White Pixel 8

0-255

Calibrate Effects

Pan

Tilt

FE I Rotation

FE 2 Rotation

FE 3 Rotation

Calibrate colours

Red

Green

Blue

White

Red Intensity

Green Intensity

Blue Intensity

White intensity

Pixel Correction

Red 1

Green 1

Blue 1

White 1

:

Red 9

Green 9

Blue 9

White 9

Load Default Calibrations

17

0-255 0-255 0-255 0-255 0-355 0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255 0-255
0-255 0-255 0-255 0-255

Level 5

Level 6

Tilt : Dimmer Fine Step Time Tilt : Dimmer Fine Step Time

0-255
0-255 0-25.5 sec. 0-255
0-255 0-25.5 sec.

Control menu

The Robin TetraX is equipped with the QVGA Robe touch screen with battery backup which allows you to set the fixture´s behaviour according to your needs, obtain information on its operation, test its various parts and program it, if it has to be used in a stand-alone mode. The fixture´s menu can be controlled either by the control buttons or directly by touching the icon. Control buttons on the front panel:
[ESCAPE] button used to leave the menu without saving changes. [NEXT] , [PREV] buttons for moving between menu items and symbols, adjusting values. [ENTER/Display On] button used to enter the selected menu (menu item) and to confirm adjusted value. If the fixture is disconnected from mains, the button switches the touch screen on. Icons used in the touch screen menu
– [back arrow] used to move back to the previous screen (menu). – [up arrow] used to move up on the previous page. – [down arrow] used to move down on the next page. – [confirm] used to save adjusted values, to leave menu or to perform desired action. – [cancel] used to leave menu item without saving changes. – [confirm+copy] used to save adjusted values and copy them to the next prog. step. – [warning icon] used to indicate some error which has occurred in the fixture. – [Ethernet] used to indicate Ethernet connected. – [display turn] used to turn the display by 180°. – [slider control] used to recall slider system for setting desired value. – [keyboard control] used to recall keyboard system for setting desired value. – [air filters cleaning] used to signal that cleaning period of the air filters elapsed. The menu page displays icons for each function that you can perform from the touch screen. After switching the fixture on, the touch screen shows the screen with the ROBE logo:
18

Note: The green icon at the top right corner of the screen indicates the level of the display battery charging. If the whole icon is green, the battery is fully charged while the red icon indicates exhausted battery. The battery charges during fixture operation, its charging lasts cca 6 hours. We recommend that the fixture should be in operation at least 7 hours per week to keep the battery fully charged. If you switch the fixture on and this screen will not appear till 1 minute, switch the fixture off and on again. If the screen lights, the battery is exhausted. In case the screen still does not light, the battery is faulty. This is also indicated by an error message “Faulty battery” and if such an error message appears the battery should be replaced immediately. The lifetime of the battery is highly dependent on ambient temperature (and consequently on base temperature). If the maximum ambient temperatures (as recorded and displayed in menu: Information -> Fixture Temperatures -> Ambient Temperature -> Maximum NonRes.) are kept within the specified limits, the battery should last for at least two years. Shell the ambient temperatures exceed the specified maximum temperature, the lifetime of the batteries could be considerably shortened even up to just one year or less and also result in physical damage (battery leakage) or unreliable fixture functions. Damage caused by batteries failed due to exceeded maximum ambient temperature cannot be claimed under warranty terms.
Touch any part of the screen or press the [ENTER/Display On] button to display the initial screen with the current stored DMX address:
Touch the green arrow at the bottom right corner of the screen or press the [ENTER/Display On] button to enter the ” Address” menu. Each item (such as a Tab, menu item, text box, icon) may be selected from a screen by simply touching the item in the list or by pressing the [NEXT] or [PREV] buttons to scroll through items. With each press, the next item is highlighted. Press [ENTER/Display On] to select the highlighted item.
Before first fixture operation, set current date and time in the menu “Date &Time Settings” (menu path: Personality–> Date &Time Settings).
7.1 Tab ” Address”
DMX Address – Select the menu to set the DMX start address.
DMX Preset – Use the menu to select desired channel mode. View Selected Preset – Use the menu to display channels included in the selected mode.
Ethernet Settings – The menu allows all needed settings for the Ethernet operation
Ethernet Mode Disable – The option disables Ethernet operation. Artnet – Fixture receives Artnet protocol gMAI – Fixture receives MANet I protocol gMA2 – Fixture receives MANet 2 protocol sACN – Fixture receives sACN protocol
Ethernet To DMX – Fixture receives protocol from the Ethernet input and sends DMX data to its DMX output (fixture works as an “Ethernet/DMX converter”, next fixture can be connected to its DMX output and you can build a standard DMX chain by connecting another fixtures. Only one fixture has to be connected to the Ethernet.
19

IP Address/Net Mask – Select this menu to set IP address. IP address is the Internet protocol address. The IP uniquely identifies any node (fixture) on a network. There cannot be 2 fixtures with the same IP address on the network!
Default IP Address -Preset IP address, you can set up only first byte of IP address (2 or 10) e.g. 002.019.052.086. Custom IP Address – The option enables to set up all bytes of IP address. Net Mask – The option enables to set up all bytes of Net Mask.
ArtNet Universe – Use this item to set a Universe (0-255). The Universe is a single DMX 512 frame of 512 channels.
MANet Settings – Use this menu to set parameters for MANet operation. MANet Universe I/II – The value of this item can be set in range 1-256. MANet Session ID – The value of this item can be set in range 1-32.
sACN Settings – Use this menu to set parameters for sACN operation. sACN Universe – The value of this item can be set in range 1-32000. sACN Priority – The value of this item can be set in range 0-255.
Klingnet Settings – Use this menu to enable or disable Klingnet protocol.
7.2 Tab “Information”
Fixture Times – The menu provides readouts of fixture operation hours and air filters using hours. Power On Time – Select this menu to read the number of fixture operation hours. Total Hours – The item shows the total number of the operation hours since the Robin TetraX has been fabricated. Resettable Hours – The item shows the number of the operation hours that the Robin TetraX has been powered on since the counter was last reset. In order to reset this counter to 0, touch the text box next to the item “Resettable Hours:” Air Filter – Regular cleaning of the air filter in the fixture base is very important for the fixture´s life and performance. The two items of this menu help you to keep cleaning period of the air filters. Alert period – Cleaning schedule for the fixture depends on the operating environment. It is therefore impossible to specify accurate cleaning interval. This item allows you to change the cleaning interval of the air filter. This “alert” value is 300 hours and it is set as default. Inspect the fixture within its 300 hours of operation to see whether cleaning is necessary. If cleaning is required, clean air filter and change the value in this menu on acceptable level. Min. level of alert period is 10 hours, max. is 300 hours. Elapsed Time – The item allows you to read the time which remains to cleaning air filter. The time period is set in the menu mentioned above. Expired time period is signalled by a negative mark (-) at the time value and a warning icon on the display. Clean the filter and reset this menu item (by touching the text box next to the item “Elapsed Time”).
Fixture Temperatures – The menu is used to view temperatures of the fixture´s inside. LEDs temperature – The menu shows temperature on the LEDs PCB . Current – A current temperature of the LEDs PCB. Maximum NonRes. – A maximum temperature of the LEDs PCB since the fixture has been fabricated. Maximum Res. – A maximum temperature of the LEDs PCB since the counter was last reset. In order to reset some counter to 0, touch desired text box under item “Max.Res.” Base Temperature – The menu shows temperature in the fixture base (on the display PCB). Current – A current temperature in the fixture base. Maximum NonRes. – A maximum temperature in the fixture base since the fixture has been fabricated. Maximum Res. – A maximum temperature in the fixture base since the counter was last reset. In order to reset this counter to 0, touch the text box next to the item “Maximum Res.” 20

DMX Values – The menu is used to read DMX values of each channel received by the fixture.
Wireless State – The menu serves for reading of the wireless operation status. Unlink Wireless Adapter – The item serves for unlinking the fixture from DMX transmitter.
Power Channel State – The menu item shows state of the Power/Special functions switches.
Software Version – Select this item to read the software version of the fixture modules: Display System – A display display board in the fixture base Module M – A pan/Tilt module Module DR – A LEDs driver module Module PX – Pixels + zoom control module Wireless – Wireless DMX module
Product IDs – The menu is used to read the MAC Address ,RDM UID and RDM Label.
View Logs – Use this menu to read fixture´s data which have been recorded during fixture operation. This colected data allows easier troubleshooting.
Fixture Errors – Use this menu to read fixture errors which have occurred during fixture operation. Fixture States – Recorded following actions: Fixture On, Fixture Off. Fixture Position – Recorded installation positions of the fixture:
Fixture Temperatures – Recorded temperatures which have exceeded defined levels.
Note: The log buffer can contain 8000 records max. If the buffer is full, old data will be overwritten.
7.3 Tab “Personality”
DMX Preset – Use the menu to select desired channel mode. View Selected Preset – Use the menu to display channels included in the selected mode.
DMX Input- Use the menu to select mode of DMX signal receiving. Wired – DMX signal is received by means of the standard DMX cable. Wireless – DMX signal is received by means of the inbuilt wireless module. Wireless In/XLR Out- the fixture receives wireless DMX and sends the signal to its wired DMX output. The fixture behaves as ” Wireless/Wired” adaptor.
The options “Wired” and “Wireless” are also stated in DMX chart (channel Power/Special functions). Note. If the wireless module is not installed in the fixture, the following message will appear:
DMX Input Set to Wired Wireless Module Missing If the fixture is not connected to mains, the message “Not Available In Offline Mode” will appear after entering the menu DMX Input. To enter this menu, the fixture has to be connected to mains.
Pan/Tilt Settings – Use the menu set behaviour of the pan movement and the tilt movement.
Pan Reverse – The item allows to invert pan movement. Tilt Reverse – The item allows to invert tilt movement. Pan/Tilt Feedback – The item allows to return the mowing head to the required pan/tilt position after changing the position by an external force if this option is set on. Note. Be careful, the Pan/Tilt Feedback should be permanent On, the option Off is not suitable for standard operation and the head of the fixture can be damaged!
21

Pan/Tilt mode – Use this menu to set the mode of the pan/tilt movement Time mode ­ The pan and tilt will move with different speeds and they will come at the same time to the end point of their tracks (pan and tilt use their optimal speeds). Time of the pan/tilt movement (25.5 sec. max.) is set by the channel “Pan/Tilt speed, Pan/Tilt time”. Speed Mode – Both Pan and tilt will move with the same speed as adjusted at the channel “Pan/Tilt speed, Pan/Tilt time”.
Pixel Control – Use the menu to index or mirror pixels. Pixel Index – The item allows you to choose needed position of turned pixels. Pixel Mirror – The item allows mirroring of pixels along a vertical axis.
Both functions you can also find on the channel Power/Special functions (210-237 DMX). Important: If you use DMX commands to set values for both Pixel Index and Pixel Mirror functions, set values will be lost after switching the fixture off. In order to save the values to the fixture, go to DMX value of 237 and stay in it for 3 sec. The set values will be saved to the fixture and will not be lost by switching the fixture off and on.
Reset to default – The item sets items “Pixel Index” and “Pixel Mirror” to default (factory) values.
Microphone Sensitivity – Enter the menu if you want to adjust the microphone sensitivity from 1 (max.) to 20 (min.).
Blackout Settings – Use the menu if you need to close the light output under certain conditions which are described below
Blackout DMC – Blackout during movement correction. Set this option On if you wish to close light output during the time when the LED module goes to its correct position, which has been changed by an external force. Active Blackouts – Use this menu if you wish to close the light output during effect changes.
Tilt Moving – The menu item enables to close light output while the tilt is moving.
White Point 8000K – If the function is on, the CTC channel allows to set desired white in range of 8000K-2700K (0 DMX=8000K, 255 DMX=2700K). Necessary condition is , that RGBW channels have to be set at the same DMX values, e.g. 255. If this function is off, the range of whites is not uniform and may be different for each fixture.
Automatic white pixel On/Off – In pixel control DMX modes, this function allows automatic activation of the white LEDs, based on levels of RGB pixels.
Colour Mixing Mode – This item allows switching into RGBW or CMY mode. In the CMY mode, the white(8bit)/ white (16) bit channels are not active.
Tungsten Effect Sim. – This function simulates behaviour of a halogen lamp during dimming at calibrated whites 2700K, 3200K. You can select from various lamp wattage simulation: 750W, 1000W, 1200W, 2000W, 2500W.
Dimmer Curve – You can select desired dimmer curve: Linear or Square Law.
LEDs Output Frequency – The function allows you to set the PWM (Pulse Width Modulation) output frequency of LEDs to Standard (300Hz) or High (1200Hz).
LEDs Frequency Adjust – The function allows you to change the selected PWM output frequency of LEDs in 6 levels up and down around the selected frequency in the menu “LEDs Output Frequency”.
-1…-6 – Frequency levels 1 – 6 under selected frequency. 00 – Selected frequency (Standard or High) 1…6 – Frequency levels 1 – 6 above selected frequency.
Init Effect Positions – Use the menu to set all effects to the desired positions at which they will stay after switching the fixture on without DMX signal connected.
Screen Settings – Use this menu to change the touch screen settings. Display Intensity – The item allows to control the intensity of the screen (1-min., 10-max.). Screen saver Delay – The item allows you to keep the screen on or to turn it off automatically after 1-10 minutes after last touch (or pressing any button on the control panel). Touchscreen Lock – The item allows you to lock the screen after last touch (or pressing any button on the control panel). The time delay can be set in range of 1-10 minutes. To unlock the screen, press the [ENTER/Display On] button. 22

Recalibrate Touchscreen – The item starts calibration of the touchscreen. Follow the instructions on the screen. Display Orientation – The menu allows to change display orientation.
Normal – Standard display orientation if the fixture is placed horizontally (e.g. on the ground). Inverted – This function rotates menu 180 degrees from current orientation. Auto – The option activates a gravitation sensor for automatic screen orientation. Note: Auto option is set as default. You change the display orientation by touching the icon on the display, an the option set in the “Display Orientation” menu is temporarily overridden.
Temperature unit – Use the menu item to change temperature unit from °C to °F.
Fan Settings – Use the menu to set fans operation mode. Fan Mode – Use the menu to set the fixture fans to max. power mode (option “High”) or to the auto-control mode (option “Auto”). The third option “Quiet” allows you to set desired fan noise. The light output of the fixture is reduced at low speeds of fans. Quiet – Blackout Fan Off – The menu item allows you to stop all fans in the fixture (option “On”) when its light output is closed (shutter in range of 0-31 DMX or dimmer in 0 DMX). The menu item does not influence fans in the “High” mode.
Date & Time Settings – Use this menu to set current date and time for the fixture log system (menu “View Logs”). Set this menu item before first fixture operation.
Reset Web Password – The menu item allows you to reset a password for access to the REAP (default password: 2479, user: robe).
Default Settings – The menu item allows to set all fixture parameters to the default (factory) values.
7.4 Tab “Manual Control”
Reset Functions – The menu allows to reset the fixture either per function modules or all modules together. Total System Reset – The item resets all function modules. Pan/Tilt Reset – The item resets pan and tilt. Zoom Reset – The item resets a zoom system. Flower E. Reset – The item resets Flower effects.
Manual Effect control – Use the menu to control all fixture channels by means of the control panel.
7.5 Tab “Stand-alone”
Test Sequences -Use the menu to run a program sequences without an external controller, which will show you some possibilities of using the Robin TetraX.
Dynamic Mode – This mode uses all Robin TetraX functions including tilt movement and therefore is good for a complete introduction of the fixture. Static Mode – This mode is suitable for projections on the wall, ceiling or ground without any tilt movement. Adjust the tilt to desired position and start test sequences by touching the green icon.
Music Trigger – Use the item to activate the sound control of the running program via the built-in microphone. Preset Playback – This menu allows you to select the program which will be played in a loop after switching the fixture on (the option is commonly used in a stand-alone operation without an external controller).
None – The option disables “Presetting playback” function. Test – The option starts the test sequences. Prog. 1 – The option starts user program No. 1. Prog. 2 – The option starts user program No. 2. Prog. 3 – The option starts user program No. 3.
23

Play program – Use the menu to run desired program in a loop.

Play Program 1 – The option starts user program No.1.

Play Program 2 – The option starts user program No. 2.

Play Program 3 – The option starts user program No. 3.

Edit Program – Use the menu to create or to edit desired program. The Robin TetraX offers 3 free programs,

each up to 88 steps.

Edit Program 1 – The option allows to edit user program No.1.

Edit Program 2 – The option allows to edit user program No.2.

Edit Program 3 – The option allows to edit user program No.3

To edit program:

1. Touch the item which you want to edit (“Edit Program 1” – “Edit Program 3”).

2. Touch the item “Edit Program Steps”.

3. Touch the item “Step 1”.

4 From the list of effects touch desired effect and set its value. Browse throw the list by touching the [up arrow]

and [down arrow] and set all desired effects.

An item “Step Time” (value of 0-25.5 sec.) is the time during which effects last in the current step

5. Save adjusted effects to the current step by touching the [confirm] or save and copy them to the following

step by touching the [confirm+copy]. By touching the text box “Preview” next to the current program step you

can view created scene.

6. Repeat the steps 4 and 5 for next program steps.

7. After editing desired program steps, adjust the length of the program by touching the text boxes “Start Step”

and “End Step”.

Meaning of the icons used in the “Edit Program” menu:

– moves down on the next page

– saves adjusted values and leaves menu

– moves up on the previous page

– saves values to the current step and copy them to the

following prog. step

– leaves menu without saving values

7.6 Tab “Service”

Adjust DMX Values – The menu allows you to set all effects to desired positions before fine calibration of the effects .
Calibrations – This menu enables fine calibration of fixture effects and download default calibration values. Calibrate Effects – The menu allows the fine adjustment of effects. Pan – a pan position fine adjustment Tilt – a tilt position fine adjustment FE I Rotation – a flower effect 1 fine rotation FE 2 Rotation – a flower effect 2 fine rotation FE 3 Rotation – a flower effect 3 fine rotation
Calibration of the effects via the control board 1. Disconnect DMX controller from the fixture and enter the “Calibrate Effects” menu. 2. Use the [up arrow] and [down arrow] to find “Tilt” and touch it to enter the fine effect adjustment screen. 3. Set desired value and save it by touching the [confirm]. 4. Repeat steps 2 and 3 for next items. 5. After calibrating all effects, touch the [confirm] to save all adjusted values and reset the fixture.
Calibrate Colours – The menu serves for adjusting of LEDs saturation to achieve uniform colours The items Red,Green, Blue and White serve for adjustment of white 5600K.
Calibration of white colour 5600K via the control board: 1. Disconnect DMX controller from the fixture , open shutter and dimmer and set the CTC channel
to DMX=64 (white 5600K), RGBW channels to 255 DMX and Zoom channel to 128 DMX. 2. Set the following items in the menu Personality:
White Point 8000K =On Colour Mixing Mode=RGBW
24

3. Aim the light beam on the lux meter (e.g. Minolta CL-500A Chroma meter) which is placed at min. distance of 3 m from the fixture.
4. Enter the menu Calibrate Colours.
5. By means of the Red, green, Blue and White items adjust the 5600K colour temperature as exactly as possible (u´v´= 0).
6. After adjusting 5600K colour temperature, touch the [confirm] to save all adjusted values and reset the fixture.

The items Red Intensity ,Green Intensity, Blue Intensity and White Intensity serve for correction of intensity of red, green, blue and white colour on desired level (during fixture calibration in the factory).

Pixel Correction – The menu serves for colour calibration of fixture pixels in order to get uniform colours all over pixels.

Note:User can do the calibration of white 5600K only, other colour calibrations should be done in the factory.

Calibration protocol:

Effect

Mode 1

Pan – fine adjustment channel 43

Tilt – fine adjustment channel 44

FE I Rotation

channel 45

FE 2 Rotation

channel 46

FE 3 Rotation

channel 47

Red – red saturation channel 48

Green- green saturation channel 49

Blue – blue saturation channel 50

White – white saturation channel 51

Mode 2 channel 63 channel 64 channel 65 channel 66 channel 67 channel 68 channel 69 channel 70 channel 71

Mode 3 channel 77 channel 78 channel 79 channel 80 channel 81 channel 82 channel 83 channel 84 channel 85

Mode 4 channel 86 channel 87 channel 88 channel 89 channel 90 channel 91 channel 92 channel 93 channel 94

Mode 5 channel 90 channel 91 channel 92 channel 93 channel 94 channel 95 channel 96 channel 97 channel 98

Load Default Calibrations – The item loads default (factory) calibration values.

Update software – The menu item allows you to update software in the fixture via either serial or USB port of PC. The following items are required in order to update software:
– PC running Windows or Linux or macOS – DSU file – or Robe Universal Interface / Robe Universal interface WTX.

To update software in the fixture: 1. DSU file is available from Robe web site at WWW.robe.cz.
File with extension zip is intended for Windows (used and tested from XP to W10 on 32/64bit systems). File with extension tbz is intended for Linux (used and tested on Debian and Ubuntu 32/64bit). File with extension dmg is intended for macOS (used and tested on OSX up to Sierra) XQuartz required, install it from https://www.xquartz.org/ Save the download file to a folder on your computer. In case that you use windows, extract files in the zip file (e.g. DSU_RobinTetraX_18051835.zip) 2. Disconnect the fixture from DMX controller. 3. Connect a USB port of your computer with the Robe Universal Interface by means of the USB cable and DMX
input of the fixture with the DMX output of the Robe Universal Interface via a DMX cable.

25

4. Switch the fixture to the update mode (Tab “Service” –> Update software). Note: If you do not want to continue in the software update, you have to switch off and on the fixture to escape from the updating mode. We recommend to cancel all running programs on your computer before starting the software uploader.
5. Double-click the software uploader file (e.g. DSU_RobinTetraX_18051638.exe) in the extracted files. The Software Uploader program will start running.
6. Select correct “COM ” number if you use a Flash cable RS232/DMX or select “Robe Universal Interface ” if you use the Robe Universal Interface/Robe Universal Interface WTX and then click on the “Connect” button.
7. If the connection is OK, click the “Start Uploading” button to start software uploading. It will take several minutes to perform software update. If the option “Incremental Update” is not checked, all processors will be updated (including processors with the same software version). If you wish to update only processors with new version of software, check the “Incremental Update box”. Avoid interrupting the process. Update status is being displayed in the “Info Box” window. When the update is finished, the line with the text “Fixture is successfully updated” will appear in this window.
Note: After all processors updating, the fixture will be set to default values. If you use the Incremental update, setting the fixture to default values depends on type of updated processors. In case upload process is interrupted (e.g. power loss), the fixture stays in “Updating mode” and you will have to repeat the software update again.
26

Another way, how to update software in the fixtures (especially large installation of fixtures) is to use the ROBE Uploader. It is a software for automatized software update of Robe fixtures. It can take advantage of RDM support and Ethernet ports if present in the units.
For more information please see https://www.robe.cz/robe-uploader/.
27

RDM

This fixture supports RDM operation. RDM (Remote Device Management) is a bi- directional communications protocol for use in DMX512 control systems, it is the new open standard for DMX512 device configuration and status monitoring. The RDM protocol allows data packets to be inserted into a DMX512 data stream without adversely affecting existing non-RDM equipment. By using a special ,,Start Code,” and by complying with the timing specifications for DMX512, the RDM protocol allows a console or dedicated RDM controller to send commands to and receive messages from specific moving lights. RDM allows explicit commands to be sent to a device and responses to be received from it. The list of commands for Robin TetraX is the following.

Parameter ID
DISC_UNIQUE_BRANCH DISC_MUTE DISC_UN_MUTE DEVICE_INFO SUPPORTED_PARAMETERS SOFTWARE_VERSION_LABEL DMX_START_ADDRESS IDENTIFY_DEVICE DEVICE_MODEL_DESCRIPTION MANUFACTURER_LABEL DEVICE_LABEL SENSOR_DEFINITION SENSOR_VALUE DISPLAY_INVERT DISPLAY_LEVEL TILT_INVERT DEVICE_RESET DMX_PERSONALITY DMX_PERSONALITY_DESCRIPTION STATUS_MESSAGES STATUS_ID_DESCRIPTION DEVICE_HOURS 2 ROBE_DMX_INPUT ROBE_WIRELESS_UNLINK 2…Commands relative resetable values

Discovery command SET command *

RDM model ID for the Robin TetraX is 0x012a.

GET command

Robe Ethernet Access Portal

The REAP allows you to display on your computer information about some fixture settings, operating conditions (e.g. temperature in the fixture) and error messages which were generated during fixture operation. Your computer needs to be connected to the fixture(s) through the means of Ethernet wired network and a network switch. The Ethernet network connection (Local LAN) typically needs to be set to 2.x.x.x address, assuming that no other computer on the network contains such an address while keeping all ROBE fixtures in default IP settings.
For more information about REAP options, computer and fixture settings please see the REAP user manual at https://www.robe.cz/res/downloads/user_manuals/User_manual_REAP.pdf.

28

Information icon

Error and information messages

– Air Filters Cleaning
This icon signalizes that cleaning period of the air filters has elapsed and you have to clear air filters and reset the menu item “Elapsed Time”.
Errors
Error in the fixture is signalled by the yellow warning icon at the bottom line of the screen:

Touch the warning icon or press the [ESCAPE] button to display error messages. List of error and information messages:
Temperature Sensor Error The message informs you that the communication between the head temperature sensor and the main processor failed.
Tilt Error 1 (Tilt Error 2) This message will appear after the reset of the fixture if the head´s indexing circuit malfunctions (sensor failed) or the stepping motor or its driving PCB is defective. The head is not located in the default tilt position after fixture reset. Pan Err 1 (Pan Error 2) This message will appear after the reset of the fixture if the head´s indexing circuit malfunctions (sensor failed) or the stepping motor or its driving PCB is defective. The head is not located in the default pan position after fixture reset.
EEprom Error Hardware error of the EEprom.
Recharge The battery The battery on the display board needs to be charged. Let the fixture on about 6 hrs.
Battery faulty. Replace it. The battery on the display board is exhausted and should be replaced immediately.
Clean Air Filters The message informs that the item “Elapsed Time” in the “Fixture Information” menu is at 0 value. Clean air filter in the fixture base and reset this counter.

29

Technical Specifications

Electrical

Power supply: electronic auto-ranging
Input voltage range: 100-240V, 50-60Hz Fuse: T 6.3A
Max. power consumption: 320W ( power factor= 0.97) Mains input: – max. 16A (US 13A)

Optic

Light source: 9 RGBW LED multichips
RGBW or CMY colour mixing LED life expectancy: min. 50.000 hours Typical lumen maintenance: L70/B50 @ 50.000 hours

Colour effects Virtual colour wheel (66 preset colours) Rainbow effect with in both directions with variable speed CTC in range of 2700K-8000K
Halogen lamp effect at whites 2700K – 4200K

Zoom

Linear motorized zoom
Min. beam angle: 4° Max. beam angle:45°

Multi-Coloured Flower Effect 3 x Multi-Coloured Flower Effect rotates in both directions at variable speed.

Strobe

Strobe effect with variable speed (0.3 – 20Hz)

Dimmer

Imperceptible 18 bit dimming for ultra smooth fade to black

Control

Graphic touch screen for fixture setting and addressing Gravitation sensor for auto screen positioning
Battery backup of the touch screen Readout fixture and LED module usage, receiving DMX values, temperatures, etc Built-in analyzer for easy fault finding, error messages Individual pixel control of each LED Stand-alone operation
3 user editable programs, each up to 88 steps
Supported protocols: USITT DMX 512, RDM, ArtNet, MANet, MANet2, sACN, Kling- Net Support of RDM (Remote Device Management) 6 DMX modes (42, 62, 76, 85, 89, 98 control channels)

Wireless DMX/RDM module RW 001 (only for Wireles DMX version of the fixture) Supported protocols: full RDM support, CRMX , W-DMXTM G2, G3,G4 and G4S
Operational frequency range: 2402-2480 MHz
Output power: 100 mW Receiver sensitivity (0.1% BER): -93 dBm Crystal Clock Frequency : 16.0 MHz

30

Pan/Tilt

Pan movement range 540°/360° Tilt movement range 191° Continual pan rotation 16 bit movement resolution Automatic pan/Tilt position correction Remotely controllable speed of pan/tilt movement for easy programming Pan-lock mechanism

Connection

DMX data in/out: Locking 5-pin XLR AC power IN/Out : Neutrik power CON TRUE 1 Ethernet IN/Our: RJ45

Max. number of fixtures in Ethernet IN/Out line 8

Mounting

Attachment horizontally or vertically via two Omega mounting adaptors Safety cable attachment point

Temperatures
Ambient temperature range : -5°C/+40° C Maximum housing temperature : 70° C

Minimum distances
Min. distance from flammable surfaces: 0.5 m Min. distance to lighted object: 1 m

Total heat dissipation (calculated) Maximum: 818 BTU/hr

Protection factor IP20

Weight

16.3 kg (35.9 lbs )

Accessories 1 x Power cable including powerCON TRUE1 In connector 1 x Omega adaptor CL regular (2 pcs in box) 1 x user manual
Optional accessories Upgrade kit CRMX Universal 260 (P/N 99030100) Safety wire 35 kg (P/N 99011963) Daisy Chain powerCON TRUE1 In/Out, EU, 2m, Indoor (P/N 13052439) Daisy Chain powerCON TRUE1 In/Out, US, 2m, Indoor (P/N 13052440) Daisy Chain powerCON TRUE1 In/Out, EU, 5m, Indoor (P/N 13052444)

31

Dimensions (mm) 32

Maintenance and cleaning

It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid residues must not build up on or inside optical system. Otherwise, the fixture`s light output will be significantly reduced. Regular cleaning will not only ensure the maximum light output, but will also allow the fixture to function reliably throughout its life. A soft lint-free cloth moistened with any weak detergent solution is recommended for cleaning fixture´s covers, under no circumstances should alcohol or solvents be used!
DANGER ! Disconnect from the mains before starting any
maintenance and cleaning work.
The interior of the fixture should be cleaned at least annually using a vacuum cleaner or compressed air. The cooling fans in the base should be cleaned at least once a year.
Important! Never use alcohols (ethanol, methanol, isopropyl alcohol), acetone and another aggressive solvents for cleaning the LED lens array. Do not immerse lenses in liquid (e.g. water) during cleaning.
Recommended steps for cleaning the LED lens array: 1. Use low-pressure compressed air to remove coarse dust from lenses. 2. Use distilled water with weak detergent solution and lint-free small cloth for further cleaning of lenses. 3. Use an antistatic, alcohol-free screen cleaner (we recommend the Lyreco Screen Cleaner) and polish lenses
until they are dry. 4. Check the lenses are dry before reapplying power.
Important! Check the air filter in the fixture base periodically and clean before they become clogged!
Periodically clean air filter placed in the fixture´s base. The air filter cover is fastened by means of magnets. Use a vacuum cleaner, compressed air or you can wash them and put back dry. After replacing the air filter, reset the elapsed time counter in the menu “Information” (Information—>Air Filters—> Elapsed Time).
Replacing the fuse. Before replacing the fuse, unplug mains lead.
1. Remove the fuse holder on the rear panel of the base with a fitting screwdriver from the housing (anti-clockwise).
2. Remove the old fuse from the fuse holder. 3. Install the new fuse in the fuse holder (only the same type and rating). 4. Replace the fuseholder in the housing and fix it.
Checking plastic parts of the fixture. The plastic parts of the fixture should be checked for damages and beginning cracks at least every two months. If hint of a crack is found on some plastic part, do not use the fixture until the damaged part will be replaced. Cracks or another damages of the plastic parts can be caused by the fixture transportation or manipulation and also ageing process may influence plastic materials.
This checking is necessary for both fixed installations and preparing fixtures for renting. Any free moving parts inside of the fixture, cracked plastic or any plastic part not sitting properly in place need to be immediately replaced.
33

12.1 Removing the optical module
The following instructions are intended for service purposes only.
To remove the optical module from moving head 1.Connect the fixture to mains and after fixture reset go to the tab Manual Control, select item Zoom
and set it at 0 DMX in order to slide the optical module (1) into the moving head. 2.Disconnect the fixture from mains. 3.Unscrew the two securing screws (2) on the guide-pins which prevent the optical module from sliding
from the moving head. If you do not have access to the securing screws, carefully push the optical module (1) to the head. Do not touch the plastic lenses bare hands! 4. To make easier pulling the optical module (1) out of the moving head, screw two screws M3 (e.g. 30 mm long) (3) to the holes with M3 thread as shown on the picture below. The two screws help you to hold the optical module. 5. Carefully take the optical module (1) out of the moving head.
34

To insert the optical module back to the moving head 1. Connect the fixture to mains and after fixture reset go to the tab Manual Control, select item the Tilt and set it
at 128 DMX and Zoom at 255 DMX. 2. Put one optical module (1) to the head in such a way that two guide-pins (5) aim into guide-tubes (7)
and two lead screws (4) aim into motors (6). 3. Hold the optical module (1) in this position and slowly change the item Zoom from 255 DMX to 0 DMX.
Motors “are pulling” the optical module into the head. If the optical module is not fully pulled into the head, carefully push the optical module into the head until you feel a stop. The optical module has to lay horizontally (it must not be askew). To check the optical module movement, set the Zoom at 255 – 0 DMX a few times. The optical module has to move smoothly in both directions. 4 Set the Zoom at 0 DMX and disconnect the fixture from mains. 5. Screw the two securing screws (2) to the guide-pins (5) to secure optical module in the moving head. DO NOT FORGET TO SCREW THE SECURING SCREWS (2) AND TO UNSCREW AUXILIARY SCREWS (3)! BEFORE CONNECTING THE FIXTURE TO MAINS!
35

12.2 Disposing of the product
To preserve the environment please dispose or recycle this product at the end of its life according to the local regulations and codes.

12. ChangeLog

This section summarizes changes in the user manual.

Version of the Date of issue manual

Description of changes

1.1

24/10/2022

DMX protocol ver.1.1

1.2

08/02/2023

Tilt movement range corrected

1.3

02/03/2023

Pixel calibration added

1.4

13/03/2023

Information about wireless DMX module added

36

14. Appendix – DMX modes overview

Pixel modes underlined

Mode

DMX Channels

Mode 1

42

Mode 2

62

Mode 3

76

Mode 4

85

Mode 5

89

Mode 6

98

Main Features
16-bit pan/tilt Selection of active zone (rings, sectors) 8-bit control of four individual colours (R,G,B,W) and Dimmer Flower effects control Without control of individual pixels.
16-bit pan/tilt Selection of active zone (rings, sectors) 16-bit control of four individual colours (R,G,B,W) and Dimmer Pixel patterns control (shape, repeat/size, rotation, transition, fade, crossfade, colour) Flower effects control Without control of individual pixels
16-bit pan/tilt Selection of active zone (rings, sectors) 16-bit control of four individual colours (R,G,B,W) and Dimmer Flower effects control Individual control of pixels (R,G,B)
16-bit pan/tilt Selection of active zone (rings, sectors) 16-bit control of four individual colours (R,G,B,W) and Dimmer Flower effects control Individual control of pixels (R,G,B,W)
16-bit pan/tilt Selection of active zone (rings, sectors) 16-bit control of four individual colours (R,G,B,W) and Dimmer Pixel patterns control (shape, repeat/size, rotation, transition, fade, crossfade, colour) Flower effects control Individual control of pixels (R,G,B)
16-bit pan/tilt Selection of active zone (rings, sectors) 16-bit control of four individual colours (R,G,B,W) and Dimmer Pixel patterns control (shape, repeat/size, rotation, transition, fade, crossfade, colour) Flower effects control Individual control of pixels (R,G,B,W)

March 13, 2023 Copyright © 2020-2023 Robe Lighting – All rights reserved All Specifications subject to change without notice Made in CZECH REPUBLIC by ROBE LIGHTING s.r.o. Palackeho 416/20 CZ 75701 Valasske Mezirici
37

DMX protocol

TetraXTM – DMX protocol

Version: 1.2 Mode 1-Wash, Mode 2-Pattern, Mode 3-Pixel RGB, Mode 4-Pixel RGBW, Mode 5-Pattern full RGB, Mode 6-Pattern full RGBW

Mode/Total channels

DMX

1/42 2/62 3/76 4/85 5/89 6/98 Value

Function

111111

Pan (8 bit)

0 – 255 Pan movement by 540°/360° (128=default)

222222

Pan Fine (16 bit)

0 – 255 Fine control of pan movement (0=default)

333333

Tilt (8 bit)

0 – 255 Tilt movement by 191° (128=default)

444444

Tilt fine (16 bit)

0 – 255 Fine control of tilt movement (0=default)

555555

Pan control

0 Pan range 540°, shortcut Off (0=default)

1 Pan range 360°, shortcut On

2-127 No function (Pan range 540°, shortcut Off)

128-189 Continuous rotation fast -> slow , Forwards

190-193 Stop rotation

194-255 Continuous rotation slow -> fast , Backwards

666666

Pan/Tilt speed , Pan/Tilt time

0 Standard mode

1 Max. Speed Mode

Pan/Tilt speed mode

2 – 255 Speed from max. to min.

Pan/Tilt time mode

2 – 255 Time from 0.2 s to 25.5 sec.

777777

Power/Special functions

0 -9 Reserved (0=default) To activate following functions, stop in DMX value for at least 3 s and shutter must be closed at least 3 sec. (,,Master Shutter/Strobe”

channel 40/59/46/46/59/59 must be at range: 0-31 DMX). Corresponding menu items are temporarily overriden (unless

otherwise stated).

10-14 DMX input: Wired DMX

15-19 DMX input: Wireless DMX *

20-24 Graphic display On

25-29 Graphic display Off

30-34 RGBW colour mixing mode

35-39 CMY colour mixing mode

40-44 Pan/Tilt speed mode

45-49 Pan/Tilt time mode

50-54 Blackout while pan/tilt moving

55-59 Disabled blackout while pan/tilt moving

60-64 Dimmer curve-square law

65-69 Dimmer curve-linear

70-74 Fans mode: Auto

75-79 Fans mode: High

80-84 White point 8000K On

85-89 White point 8000K Off

Type of control
proportional
proportional
proportional
proportional
step step
proportional step
proportional
step step
proportional
proportional
step step step step step step step step step step step step step step step step

Page 1

DMX protocol

Mode/Total channels

DMX

1/42 2/62 3/76 4/85 5/89 6/98 Value

Function

90-94 95-99 100-104 105-109 110-114 115-119

Automatic white pixel On Automatic white pixel Off Quiet mode: Fans On at blackout Quiet mode: Fans Off at blackout Kling-Net On Kling-Net Off

120-124 Parking position On

125-129

Parking position Off To activate following functions, stop in DMX value for at least 3
seconds (except Pixel index and Pixel mirror ). Corresponding
menu items are temporarily overriden.

130 – 139 Fixture reset (except pan/tilt)

140 – 149 pan/Tilt reset

150 – 159 Zoom reset 160 – 169 Flower effects reset 170-171 Tungsten effect simulation (750W) On 172-173 Tungsten effect simulation (1000W) On 174-175 Tungsten effect simulation (1200W) On 176-177 Tungsten effect simulation (2000W) On 178-179 Tungsten effect simulation (2500W) On ** 180-181 Tungsten effect simulation Off

182-199 Reserved 200 – 209 Total fixture reset 210-218 Pixel index 219-227 Reserved 228-229 Pixel mirror On 230-231 Pixel mirror Off 232-236 Reserved

237 Save Pixel index and mirror to fixture

238-239 Reserved

240 Disabled “Quiet mode”

241 – 255 Quiet mode – fan noise control from min. to max.

888888

LED frequency selection

Factory display menu setting: 300Hz
Select PWM output frequency of LEDs. Selected PWM frequency can be

fine adjusted in 127 steps up/down around selected PWM frequency on

the channel below. Corresponding menu item (Frequency Setup) is

temporarily overriden.

0-4 PWM frequency from Display menu (fixture utilizes PWM

frequency set in the display menu item Frequency Setup).

5-9 300 Hz (5=default)

10-14 Reserved

15-19 600 Hz 20-255 Reserved (fixture utilizes PWM frequency set in the display menu item

Frequency Setup).

999999

LED frequency fine adjusting Factory display menu setting: 300Hz

Select desired PWM output frequency of LEDs on the channel above.

0-121 Selected LED Frequency

Type of control

Type of control
step step step step step step step step
step step step step step step step step step
step proportional
step step
step
step proportional
step
step
step
step

Page 2

DMX protocol

Mode/Total channels 1/42 2/62 3/76 4/85 5/89 6/98
10 10 10 10 10 10

DMX Value
122 123 124 125 126 127 128 129 130 131 132 133 134 135-255
0 1-2 3-4 5-6 7-8 9-10 11-12 13-14 15-16 17-18 19-20 21-22 23-24 25-26 27-28 29-30 31-32 33-34 35-36 37-38 39-40 41-42 43-44 45-46 47-48 49-50 51-52 53-54 55-56 57-58 59-60 61-62 63-64

Function
LED Frequency (step -6) LED Frequency (step -5) LED Frequency (step -4) LED Frequency (step -3) LED Frequency (step -2) LED Frequency (step -1)
Selected LED Frequency (128=default)
LED Frequency (step +1) LED Frequency (step +2) LED Frequency (step +3) LED Frequency (step +4) LED Frequency (step +5) LED Frequency (step +6) Selected LED Frequency
Background -Virtual colour wheel
No function (0=default) Filter 4 (Medium Bastard Amber) Filter 25 (Sunset Red) Filter 19 (Fire) Filter 26 (Bright Red) Filter 58 (Lavender) Filter 68 (Sky Blue) Filter 36 (Medium Pink) Filter 89 (Moss Green) Filter 88 (Lime Green) Filter 90 (Dark Yellow Green) Filter 49 (Medium Purple) Filter 52 (Light Lavender) Filter 102 (Light Amber) Filter 103 (Straw) Filter 140 (Summer Blue) Filter 124 (Dark Green) Filter 106 (Primary Red) Filter 111 (Dark Pink) Filter 115 (Peacock Blue) Filter 126 (Mauve) Filter 117 (Steel Blue) Filter 118 (Light Blue) Filter 122 (Fern Green) Filter 182 (Light Red) Filter 121 (Filter Green) Filter 128 (Bright Pink) Filter 131 (Marine Blue) Filter 132 (Medium Blue) Filter 134 (Golden Amber) Filter 135 (Deep Golden Amber) Filter 136 (Pale Lavender) Filter 137 (Special Lavender)

Page 3

Type of control
step step
step step step step step step step
step step step
step step step step step step step step step step step step step step step step step step step step step step step step step step step step step step step step step

DMX protocol

Mode/Total channels 1/42 2/62 3/76 4/85 5/89 6/98
11 11 11 11 11 11 12 12 12 12 12 12 13 13 13 13 13 14 14 14 14 14 13 15 15 15 15 15 * 16 16 16 16 16

DMX Value 65-66 67-68 69-70 71-72 73-74 75-76 77-78 79-80 81-82 83-84 85-86 87-88 89-90 91-92 93-94 95-96 97-98 99-100 101-102 103-104 105-106 107-108 109-110 111-112 113-114 115-116 117-118 119-120 121-122 123-124 125-126 127-128 129-130 131-132 133-235 236-245 246-255
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255

Function
Filter 138 (Pale Green) Filter 798 (Chrysalis Pink) Filter 141 (Bright Blue) Filter 147 (Apricot) Filter 148 (Bright Rose) Filter 152 (Pale Gold) Filter 154 (Pale Rose) Filter 157 (Pink) Filter 143 (Pale Navy Blue) Filter 162 (Bastard Amber) Filter 164 (Flame Red) Filter 165 (Daylight Blue) Filter 169 (Lilac Tint) Filter 170 (Deep Lavender) Filter 172 (Lagoon Blue) Filter 194 (Surprise Pink) Filter 180 (Dark Lavender) Filter 181 (Congo Blue) Filter 197 (Alice Blue) Filter 201 (Full C.T. Blue) Filter 202 (Half C.T. Blue) Filter 203 (Quarter C.T. Blue) Filter 204 (Full C.T. Orange) Filter 219 (Fluorescent Green) Filter 206 (Quarter C.T. Orange) Filter 247 (Filter Minus Green) Filter 248 (Half Minus Green) Filter 281 (Three Quarter C.T. Blue) Filter 285 (Three Quarter C.T. Orange) Filter 352 (Glacier Blue) Filter 353 (Lighter Blue) Filter 507 (Madge) Filter 778 (Millennium Gold) Filter 793 (Vanity Fair) Raw DMX Rainbow effect (with fade time) from slow-> fast Rainbow effect (without fade time) from slow-> fast
Background – Red/Cyan (8 bit)
Colour saturation control – coarse 0-100% (255=default)
Background – Red/Cyan (16bit)
Colour saturation control – fine (255=default)
Background – Green/Magenta (8 bit)
Colour saturation control – coarse 0-100% (255=default)
Background – Green/Magenta (16bit)
Colour saturation control – fine (255=default)
Background – Blue/Yellow (8 bit)
Colour saturation control – coarse 0-100% (255=default)
Background – Blue/ Yellow (16bit)

Page 4

Type of control
step step step step step step step step step step step step step step step step step step step step step step step step step step step step step step step step step step proportional proportional proportional
proportional
proportional
proportional
proportional
proportional

DMX protocol

Mode/Total channels 1/42 2/62 3/76 4/85 5/89 6/98
14 17 17 17 17 17 18 18 18 18 18 15 19 19 19 19 19
16 20 20 20 20 20
17 21 21 21 21 21 22 22 22 22 22 18 23 23 23 23 23
19 24 24 24 24 24

DMX Value

Function

0 – 255 0-255

Colour saturation control – fine (255=default)
Background – White (8 bit) – all pixels
If RGBW mode is selected: Colour saturation control – coarse 0-100% (255=default) If CMY mode is selected:

0 – 255 No function
Background – White (16 bit) – all pixels
0 – 255 Colour saturation control – fine (255=default)
Background – CTO
0-255 Col. temperature correction from 8000K to 2700K -for whites only (0=8000K, 64=5600K, 128=4200K, 192=3200K, 255=2700K) To get colour temperatures stated above, RGBW channels have to be set at the same value (e.g. 255DMX) or RGB=0 and White channel > 0 DMX (0=default) (To activate Tungsten effect at 2700K and 3200K , set DMX value at “Power/Special functions” channel)
Background – Shutter/ strobe
0 – 31 Shutter closed 32 – 63 Shutter open (32=default) 64 – 95 Strobe effect from slow to fast 96 – 127 Shutter open 128 – 143 Opening pulse in sequences from slow to fast 144 – 159 Closing pulse in sequences from fast to slow 160 – 191 Shutter open 192 – 223 Random strobe effect from slow to fast 224 – 255 Shutter open
Background – Dimmer intensity (8 bit)
0 – 255 Dimmer intensity from 0% to 100% (255=default)
Background Dimmer intensity – fine (16 bit)
0 – 255 Fine dimming (255=default)
Colour Mix control
The channel defines relation between color channels

IF Flower effect is active, its colour channels always have priority! Global = Global Colours (RGBW colours, Virtual Colour Wheel,
CTO)

Pixel = Pixel Colours (RGB individual pixels or Kling-Net)

0-9 10-19 20-29 30-39 40-49 50-59 60-69 70-79 80-127 128 129-254 255

Global colours (Global has priority) Maximum mode (highest values have priority) Minimum mode (lowest values have priority) Multiply mode (multiply Global and Pixel) Addition mode (Global + Pixel) (45=default) Subtraction mode (Global ­ Pixel) Inverted Subtraction mode (Pixel ­ Global) Coloured background Raw DMX Global colours only (Global has priority) Crossfade (crossfade between Global and Pixel) Pixel colours (Pixel has priority)
Flower Effect 1

Type of control
proportional
proportional
proportional proportional
step step proportional step proportional proportional step proportional step proportional proportional
step step step step step step step proportional step proportional step

Page 5

DMX protocol

Mode/Total channels

DMX

1/42 2/62 3/76 4/85 5/89 6/98 Value

Function

0 Open position-without Flower Effect (0=default)

1 – 127 Flower Effect forwards rotation from fast to slow

128 Flower Effect -without rotation

129-255 Backwards rotation from slow to fast

20 25 25 25 25 25

Flower Effect 1 – Red/Cyan (8 bit)

0 – 255 Colour saturation control – coarse 0-100% (255=default)

21 26 26 26 26 26

Flower Effect 1 – Green/Magenta (8 bit)

0 – 255 Colour saturation control – coarse 0-100% (255=default)

22 27 27 27 27 27

Flower effect 1 – Blue/Yellow (8 bit)

0 – 255 Colour saturation control – coarse 0-100% (255=default)

23 28 28 28 28 28

Flower Effect 1 – White (8 bit)

0-255 Colour saturation control – coarse 0-100% (255=default)

24 29 29 29 29 29

Flower Effect 1 – Shutter/ strobe

0 – 31 Shutter closed

32 – 63 Shutter open (32=default)

64 – 95 Strobe-effect from slow to fast

96 – 127 Shutter open

128 – 143 Opening pulse in sequences from slow to fast

144 – 159 Closing pulse in sequences from fast to slow

160 – 191 Shutter open

192 – 223 Random strobe-effect from slow to fast

224 – 255 Shutter open

25 30 30 30 30 30

Flower Effect 1 – Dimmer intensity (8 bit)

0 – 255 Dimmer intensity from 0% to 100% (255=default)

26 31 31 31 31 31

Flower Effect 2

0 Open position-without Flower Effect (0=default)

1 – 127 Flower Effect forwards rotation from fast to slow

128 Flower Effect -without rotation

129-255 Backwards rotation from slow to fast

27 32 32 32 32 32

Flower Effect 2 – Red/Cyan (8 bit)

0 – 255 Colour saturation control – coarse 0-100% (255=default)

28 33 33 33 33 33

Flower Effect 2 – Green/Magenta (8 bit)

0 – 255 Colour saturation control – coarse 0-100% (255=default)

29 34 34 34 34 34

Flower effect 2 – Blue/Yellow (8 bit)

0 – 255 Colour saturation control – coarse 0-100% (255=default)

30 35 35 35 35 35

Flower Effect 2 – White (8 bit)

0-255 Colour saturation control – coarse 0-100% (255=default)

31 36 36 36 36 36

Flower Effect 2 – Shutter/ strobe

0 – 31 Shutter closed

32 – 63 Shutter open (32=default)

64 – 95 Strobe-effect from slow to fast

96 – 127 Shutter open

128 – 143 Opening pulse in sequences from slow to fast

144 – 159 Closing pulse in sequences from fast to slow

160 – 191 Shutter open

192 – 223 Random strobe-effect from slow to fast

224 – 255 Shutter open

32 37 37 37 37 37

Flower Effect 2 – Dimmer intensity (8 bit)

Page 6

Type of control
step proportional
step proportional
proportional
proportional
proportional
proportional
step step proportional step proportional proportional step proportional step
proportional
step proportional
step proportional
proportional
proportional
proportional
proportional
step step proportional step proportional proportional step proportional step

DMX protocol

Mode/Total channels

DMX

1/42 2/62 3/76 4/85 5/89 6/98 Value

Function

0 – 255 Dimmer intensity from 0% to 100% (255=default)

33 38 38 38 38 38

Flower Effect 3

0 Open position-without Flower Effect (0=default)

1 – 127 Flower Effect forwards rotation from fast to slow

128 Flower Effect -without rotation

129-255 Backwards rotation from slow to fast

34 39 39 39 39 39

Flower Effect 3 – Red/Cyan (8 bit)

0 – 255 Colour saturation control – coarse 0-100% (255=default)

35 40 40 40 40 40

Flower Effect 3 – Green/Magenta (8 bit)

0 – 255 Colour saturation control – coarse 0-100% (255=default)

36 41 41 41 41 41

Flower effect 3 – Blue/Yellow (8 bit)

0 – 255 Colour saturation control – coarse 0-100% (255=default)

37 42 42 42 42 42

Flower Effect 3 – White (8 bit)

0-255 Colour saturation control – coarse 0-100% (255=default)

38 43 43 43 43 43

Flower Effect 3 – Shutter/ strobe

0 – 31 Shutter closed

32 – 63 Shutter open (32=default)

64 – 95 Strobe-effect from slow to fast

96 – 127 Shutter open

128 – 143 Opening pulse in sequences from slow to fast

144 – 159 Closing pulse in sequences from fast to slow

160 – 191 Shutter open

192 – 223 Random strobe-effect from slow to fast

224 – 255 Shutter open

39 44 44 44 44 44

Flower Effect 3 – Dimmer intensity (8 bit)

0 – 255 Dimmer intensity from 0% to 100% (255=default)

40 45 45 45 45 45

Zoom

0-255 Zoom from max. to min.beam angle (128=default)

• 46 46 46 46 46

Zoom – fine

0-255 Fine zooming (0=default)

• 47 47 47

Pattern selection

0-2 No pattern (0=default)

3-4 Pattern 1

5-6 Pattern 2

7-8 Pattern 3

9-10 Pattern 4

11-12 Pattern 5

13-14 Pattern 6

15-16 Pattern 7

17-18 Pattern 8

19-20 Pattern 9

21-22 Pattern 10

23-24 Pattern 11

25-26 Pattern 12

27-255 RAW DMX

• 48 48 48

Pattern – Repeat (Size)

0-2 Variant 1 (0=default)

3-4 Variant 2

Page 7

Type of control
proportional
step proportional
step proportional
proportional
proportional
proportional
proportional
step step proportional step proportional proportional step proportional step
proportional
proportional
proportional
step step step step step step step step step step step step proportional
step step

DMX protocol

Mode/Total channels 1/42 2/62 3/76 4/85 5/89 6/98

• 49 49 49 50 50 50 51 51 51 52 52 52 53 53 53 54 54 54 55 55 55 56 56 56 57 57 57

DMX Value

Function

5-6 7-8 9-10 11-12 13-14 15-16 17-18 19-20 21-22 23-24 25-26 27-28 29-30 31-32 33-34 35-255
0 1-127 128 129-255
0 1-255
0 1
255
0 1-255
0 – 255
0 – 255
0 – 255
0 – 255
0-2

Variant 3 Variant 4 Variant 5 Variant 6 Variant 7 Variant 8 Variant 9 Variant 10 Variant 11 Variant 12 Variant 13 Variant 14 Variant 15 Variant 16 Variant 17 Raw DMX
Pattern – Movement
No movement Pattern movement from fast to slow Pause – without movement (128=default) Backwards pattern movement from slow to fast
Pattern – Fade
Snap (0=default) Fade from min. to max.
Pattern -Transition
No fade (0=default) 100ms : 4 sec
Pattern – Crossfade
Background
Crossfade between Background and Pattern 0-100% (255=default)
Pattern – Red (8-bit)
Colour saturation control – coarse 0-100% (255=default)
Pattern – Green (8-bit)
Colour saturation control – coarse 0-100% (255=default)
Pattern – Blue (8-bit)
Colour saturation control – coarse 0-100% (255=default)
Pattern – White (8-bit)
Colour saturation control – coarse 0-100% (255=default)
Pattern – Colour macro
No macro (0=default) Macros 2-23 allow control of colour change speed from max. to min.

3-8 9-14 15-20 21-26

Macro 1 Macro 2 Macro 3 Macro 4

Type of control
step step step step step step step step step step step step step step step proportional
step proportional
step proportional
step proportional
step step
step
step proportional
proportional
proportional
proportional
proportional
step
step proportional proportional proportional

Page 8

DMX protocol

Mode/Total channels

DMX

1/42 2/62 3/76 4/85 5/89 6/98 Value

Function

27-32 Macro 5

33-38 Macro 6

39-44 Macro 7

45-50 Macro 8

51-56 Macro 9

57-62 Macro 10

63-68 Macro 11

69-74 Macro 12

75-80 Macro 13

81-86 Macro 14

87-92 Macro 15

93-98 Macro 16

99-104 Macro 17

105-110 Macro 18

111-116 Macro 19

117-122 Macro 20

123-128 Macro 21

129-134 Macro 22

135-140 Macro 23

141-255 Raw DMX

• 58 58 58

Pattern – Shutter/ strobe

0 – 31 Shutter closed

32 – 63 Shutter open (32=default)

64 – 95 Strobe effect from slow to fast

96 – 127 Shutter open

128 – 143 Opening pulse in sequences from slow to fast

144 – 159 Closing pulse in sequences from fast to slow

160 – 191 Shutter open

192 – 223 Random strobe effect from slow to fast

224 – 255 Shutter open

• 59 59 59

Pattern – Dimmer intensity (8 bit)

0 – 255 Dimmer intensity from 0% to 100% (255=default)

41 60 47 47 60 60

Master Shutter/ strobe

0 – 31 Shutter closed

32 – 63 Shutter open (32=default)

64 – 95 Strobe effect from slow to fast

96 – 127 Shutter open

128 – 143 Opening pulse in sequences from slow to fast

144 – 159 Closing pulse in sequences from fast to slow

160 – 191 Shutter open

192 – 223 Random strobe effect from slow to fast

224 – 255 Shutter open

42 61 48 48 61 61

Master Dimmer intensity (8 bit)

0 – 255 Dimmer intensity from 0% to 100% (0=default)

• 62 49 49 62 62

Master Dimmer intensity – fine (16 bit)

0 – 255 Fine dimming (0=default)

• • 50 50 63 63

Red pixel 1

0-255 Red LED saturation control 0-100% (0=default)

Page 9

Type of control
proportional proportional proportional proportional proportional proportional proportional proportional proportional proportional proportional proportional proportional proportional proportional proportional proportional proportional proportional
proportional
step step proportional step proportional proportional step proportional step
proportional
step step proportional step proportional proportional step proportional step
proportional
proportional
proportional

DMX protocol

Mode/Total channels

DMX

1/42 2/62 3/76 4/85 5/89 6/98 Value

Function

• • 51 51 64 64

Green pixel 1

0-255 Green LED saturation control 0-100% (0=default)

• • 52 52 65 65

Blue pixel 1

0-255 Blue LED saturation control 0-100% (0=default)

• • • 53 * 66

White pixel 1

0-255 White LED saturation control 0-100% (0=default)

:

• • 74 82 87 95

Red pixel 9

0-255 Red LED saturation control 0-100% (0=default)

• • 75 83 88 96

Green pixel 9

0-255 Green LED saturation control 0-100% (0=default)

• • 76 84 89 97

Blue pixel 9

0-255 Blue LED saturation control 0-100% (0=default)

• • • 85 * 98

White pixel 9

0-255 White LED saturation control 0-100% (0=default)

• function is active only 10 seconds after switching the fixture on

** In the Tungsten effect simulation the Dimmer channel imitates behaviour of the halogen lamp during dimming

*** Select RGB or CMY mixing mode on channel “Power/Special functions”

Copyright ©2022-2023 Robe Lighting s.r.o. – All rights reserved

Type of control
proportional proportional proportional
proportional proportional proportional proportional

Page 10

Robin Tetra X – colours on Virtual Colour Wheel

Colour name

Red (DMX)

Green (DMX)

Blue (DMX)

Filter 4 (Medium Bastard Amber)

255

118

0

Filter 25 (Sunset Red)

255

50

0

Filter 19 (Fire)

255

13

0

Filter 26 (Bright Red)

255

0

0

Filter 58 (Lavender)

117

0

97

Filter 68 (Sky Blue)

42

195

100

Filter 36 (Medium Pink)

255

74

8

Filter 89 (Moss Green)

69

245

0

Filter 88 (Lime Green)

187

226

0

Filter 90 (Dark Yellow Green)

0

255

1

Filter 49 (Medium Purple)

255

0

27

Filter 52 (Light Lavender)

227

86

14

Filter 102 (Light Amber)

233

164

0

Filter 103 (Straw)

207

137

0

Filter 140 (Summer Blue)

0

161

7

Filter 124 (Dark Green)

29

255

0

Filter 106 (Primary Red)

242

1

1

Filter 111 (Dark Pink)

255

67

11

Filter 115 (Peacock Blue)

0

255

28

Filter 126 (Mauve)

255

0

39

Filter 117 (Steel Blue)

163

255

14

Filter 118 (Light Blue)

0

255

61

Filter 122 (Fern Green)

98

255

3

Filter 182 (Light Red)

255

16

2

Filter 121 (Filter Green)

165

255

0

Filter 128 (Bright Pink)

255

0

13

Filter 131 (Marine Blue)

73

245

27

Filter 132 (Medium Blue)

0

193

113

Filter 134 (Golden Amber)

191

83

0

Filter 135 (Deep Golden Amber)

255

52

0

Filter 136 (Pale Lavender)

164

96

29

Filter 137 (Special Lavender)

130

60

63

Filter 138 (Pale Green)

226

255

0

Filter 798 (Chrysalis Pink)

49

0

98

Filter 141 (Bright Blue)

8

176

62

Filter 147 (Apricot)

215

104

0

Filter 148 (Bright Rose)

255

3

0

Filter 152 (Pale Gold)

202

115

0

Filter 154 (Pale Rose)

214

107

0

Filter 157 (Pink)

255

56

5

Filter 143 (Pale Navy Blue)

0

193

72

Filter 162 (Bastard Amber)

223

153

6

Filter 164 (Flame Red)

255

27

0

Filter 165 (Daylight Blue)

23

236

87

Filter 169 (Lilac Tint)

206

123

0

Filter 170 (Deep Lavender)

235

123

41

Filter 172 (Lagoon Blue)

0

255

54

White (DMX)
109 3 0 0
110 0
24 3 0 0 0
134 0
33 218
12 0
49 41
0 161
34 2 0 0
32 30
0 0 0 54 102 51 14 0 15 37 39 48 48 148 41 4 81 110 33 0

1

Colour name
Filter 194 (Surprise Pink) Filter 180 (Dark Lavender) Filter 181 (Congo Blue) Filter 197 (Alice Blue) Filter 201 (Full C.T. Blue) Filter 202 (Half C.T. Blue) Filter 203 (Quarter C.T. Blue) Filter 204 (Full C.T. Orange) Filter 219 (Fluorescent Green) Filter 206 (Quarter C.T. Orange) Filter 247 (Filter Minus Green) Filter 248 (Half Minus Green) Filter 281 (Three Quarter C.T. Blue) Filter 285 (Three Quarter C.T. Orange) Filter 352 (Glacier Blue) Filter 353 (Lighter Blue) Filter 507 (Madge) Filter 778 (Millennium Gold) Filter 793 (Vanity Fair)

Red (DMX)
110 136
37 107 179 217 236 230
99 204 255 255 225 199
0 0 255 255 255

Green (DMX)
0 43
0 220 255 255 255 125 148 140
81 144 255 124 161 115
31 65
0

Blue (DMX)
21 181 255 129
57 37 30
3 16
0 0 0 72 0 65 37 0 0 13

White (DMX)
255 89 0 0 34 3 3 7 50 57
193 137 160
17 90 97
0 0 16

2

References

• XQuartz

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>