Automatic Foaming P11 Rechargeable Bathroom Kitchen Soap Pump User Manual
- May 15, 2024
- Automatic Foaming
Table of Contents
Automatic Foaming P11 Rechargeable Bathroom Kitchen Soap Pump
Product introduction
Machine structure
Product Parameter
- Model Number : P11
- Rated power: 1.5W
- Power supply: Lithium Battery
- Turn on : touch + sensor
- Sensing speed: 0.25s
- Sensing distance : 0-70mm
- Dispensing time :0.4/0.8/1.5/2.0s (4 gears)
- Bottle capacity :380mL/12.8fl/oz
- N.W. :240g(not include soap)
- G.W. :342g(not include soap)
- Working temperature: 5°C~35°C
- Waterproof: 1PX5
- Working humidity •0% ~85%
Accessories
Function
- Power On: Short press the switch, and the first gear indicator and the battery volume indicator will be on for 2s.
- Shutdown: Long press the switch for 2s, and 4 gear indicators will flash for 3s.
- Charging: The battery indicator shows the remaining power and flashing.
- Fully charged: the 4 power indicator lights are always on.
- Gear switching: Press the power button, and then the gear can be switched accordingly.
Gear Illustration
- 1st Gear – LED 1 lighted (Dispensing for 0.4s)
- 2nd Gear – LED 1 and LED 2 both lighted (Dispensing for 0.8s)
- 3rd Gear – LED 1, LED 2, LED 3 all lighted (Dispensing for 1.5s)
- 4th Gear – LED 1, LED 2, LED 3, LED 4 all lighted (Dispensing for 2.0s)
Battery indicator:
Low battery reminder: D1 indicator will be flashing quickly for 5s.
Sensing: Put your hand to the dispensing nozzle, and keep the distance
range of 0-70mm, then the machine will dispense the soap as quantitatively
produced each time.
Cleaning mode: Turn on the machine and triple-click the power button to
start the cleaning mode. The machine will automatically turn off the cleaning
mode after 10s, or you can click the power button to turn it off.
NOTE: The soap dispenser will enter a standby mode if it do not work for
a long time, no need to turn it off by yourself.
Set up
- Turn 90 degrees counterclockwise to unscrew the bottle
- Fill the with a suitable liquid soap into a bottle
- Align the bottle mouth card position with the body card position, rotate the bottle 90 degrees clockwise, and set the bottle Sub-installation host
Troubleshooting
Stop Sprayed out Troubleshooting
- Cut off a small part with scissors from the dredge bottle mouth.
- Fill the dredge bottle with clean water.
- Unscrew the soap dispenser and pull of the filter head and the end of the hose.
- Insert the dredge bottle into the hose and fill the hose with water until it comes out from the nozzle.
Notes
- This unit and accessories are not toys, do not put them in a place where the kids can touch them.
- Do not pull the power cord with wet hands to prevent the power cord from sticking to liquid
- Please make sure the adapter and power cord are dry
- This product contains a built-in rechargeable battery,
- please do not throw it into the fire, or charge, use or leave it in a high-temperature place
- Do not use when the power cord or adapter is damaged, or when the power cord socket is loose The symbol on the right indicates that the body cannot be cleaned under the water dragon and ice dragon
Note
- Please make sure the power cord is dry and do not rinse the machine with water
- Before connecting the product to charge, please make sure that the voltage marked on the product matches the local power supply voltage
- lease use and store the product at a temperature between 5°C and 35°C
- When you find any abnormality or failure of this product, please stop using it immediately, and deal with it according to the type of failure
- Do not disassemble the body to replace the battery
- Do not immerse this product in water or any liquid
- Do not knock or drop the product. If the product is damaged due to a collision or fall, please stop using it
- Persons (including children) who are physically unsound, mentally impaired, and lack relevant experience and knowledge (including children) should use under the supervision and guidance of their guardian
Repair and maintenance
- If you need to clean, it is recommended to use a wet towel to gently wipe the surface of the phone when it is turned off
- After the product is charged, the soft rubber plug of the charging port needs to be plugged in to prevent water from entering
- If this product is left unused for a long time, please take out the hand sanitiser to avoid deterioration of the liquid
Notes
- Do not immerse the product in water or rinse directly with water to avoid short circuit
- When installing or replacing the hand sanitiser, do not tilt the bottle body. If a small amount of liquid flows out, it is normal. It can be used normally after wiping it off.
- Do not use non-dedicated hand sanitiser for replacement, so as not to cause machine failure
- Store this product in a cool place, away from direct sunlight or close to heat sources
- .In the event of water spraying, upside-down, or tilting, it is necessary to confirm whether the machine has entered liquid in time, if necessary, wipe it and dry it before continuing to use
Troubleshooting table
Documents / Resources
|
Automatic Foaming P11 Rechargeable Bathroom Kitchen Soap
Pump
[pdf] User Manual
P11 Rechargeable Bathroom Kitchen Soap Pump, P11, Rechargeable Bathroom
Kitchen Soap Pump, Bathroom Kitchen Soap Pump, Kitchen Soap Pump, Soap Pump
---|---
Read User Manual Online (PDF format)
Loading......