JINGYUN GS500 Smart Wearable Watch User Manual

JINGYUN GS500 Smart Wearable Watch

Appearance Description

Charging Instructions

Thank you for purchasing our smart watch, please read the manual carefully when you use it for the first time. Firstly, press the main button to turn on the power, if the battery level is insufficient or the battery power has been exhausted, please charge it first. After connecting the charging cable, plug in the USB port (e.g., computer host, mobile power, or standard power adapter) for charging, requiring an input voltage of 5V1A or 5V2A.

Download APP & Bluetooth Pairing

Install APP
Before using this device, please download and install the APP, scan the QR code on the right side of your phone, and select the corresponding software to install according to the system of your phone. You can also search for “FitCloudPro” in the Apple AppStore to install it. Android users can download it from other stores, such as the Android Market. (Compatible System: for iOS12.0, Android9.0 and above)

Step 1: Bluetooth pairing

1. New users need to register according to the requirements within the APP, after registration is complete, enter the account number and password to log in.
2. Turn on the Bluetooth of the phone, then open the APP to pair the watch.

Step 2: Call/Media Audio Settings
After completing Bluetooth pairing, you can set the audio options on the watch. (As shown in the figure below)

1. When prompted by the pop-up window, click on Pairing.
2. Set the audio option in the watch.

Dial selection

Long press the the main dial interface to select different dials; when the watch is connected to the APP, you can also select more dials in the APP dial center.

Operating Methods

Main button:

1. Long press to turn on/off;
2. Short press to light up the screen/enter the function menu.

Customized button

1. Short press to light up the screen;
2. Long press to enter the customized function interface.
   • Long press the screen: when in the main dial interface, long press the screen to select different dials.
   • Swipe left : Go to the next interface.
   • Scroll up : While in the main dial interface, scroll up the screen to browse the information.
   • Swipe right: Go back or previous interface.
   • Scroll down : When in the main dial interface, scroll down the screen to quickly enter the setting menu.

Product Parameters

• Display: 1.43” AMOLED display
• Resolution: 466*466
• Waterproof level: 3ATM
• Wristband material: silica gel
• Heart rate sensor : HX3918
• Compatibility: For iPhone12.0/Android9.0 and above
• Main control chip : RTL8763EWE-VP
• Battery capacity : 530mAh
• Working time : about 6-8 days
• Synchronization method : Bluetooth 5.2
• Working temperature: -10℃~50℃
• Packing list : Host Charging cable Watch strap Instruction manual

APP Language

APP supports languages: Simplified Chinese, English, German, Spanish, French, Italian, Japanese, Polish, Chinese, Portuguese, Russian, and more languages will be added in the future.

Main Functions

Precautions

1. Do not hit the host seriously.
2. Do not come into contact with chemicals such as benzene and thinner.
3. Please stay away from strong magnetic fields and electric shock stations.
4. Please avoid direct light or heating appliances.
5. Never disassemble repair or modify it by yourself.
6. Please classify waste packaging, batteries, and old electronic products and dispose of them properly.
7. It is not suitable to wear when taking a bath. (The temperature cannot exceed 45℃)

FCC Warnning

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 0cm between the radiator and your body.

Specifications

• Display: AMOLED 1.43” 466*466
• Charging: USB 5V1A or 5V2A
• Water Resistance: 3ATM
• Battery : 530mAh
• Compatibility : iOS 12.0+ / Android 9.0+

FAQ

Q: How can I reset my smartwatch?
A: To reset your smartwatch, go to the settings menu in the device or refer to the user manual for specific instructions.

Q: Can I swim with this smartwatch?
A: The smartwatch has a water resistance rating of 3ATM, which means it can withstand splashes and brief immersion in water. However, it is not suitable for swimming or diving. Q: How do I update the firmware of the smartwatch?
A: To update the firmware, open the FitCloudPro app and check for any available updates in the settings menu. Follow the on-screen instructions to complete the update process.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>