Jingyun Information Technology A8 Wireless Live Clip Microphone User Manual
- June 5, 2024
- Jingyun Information Technology
Table of Contents
Jingyun Information Technology A8 Wireless Live Clip Microphone
Usage method
-
Operation mode of connecting mobile phone recording/video recording
Step 1: First, press and hold the receiver and transmitter to start up, and the pairing is successful;
Step 2: Connect the receiver to the mobile phone with the mobile phone connection line;
Step 2: Press the power on button to switch the transmitter to the outdoor mode (the default outdoor mode has been started for the first time), and open the camera and other app in the mobile phone to record videos. -
The operation mode of connecting mobile live broadcast
Step 1: First, press and hold the receiver and transmitter to start up, and the pairing is successful;
Step 2: Connect the receiver to the mobile phone with the mobile phone connection line;
Step 3: Press the start button of the transmitter to switch to the live broadcast mode, and use the Bluetooth connection of another mobile phone as the live broadcast accompaniment. Open the live broadcast app in the mobile phone for live broadcast. -
The operation mode of connecting camera recording/video recording
Step 1: First, press and hold the receiver and transmitter t o startup, and the pairing is successful;
Step 2: Connect the receiver to the camera with the camera cable;
Step 3: Press the power on button to switch the transmitter to the outdoor mode (the first power on is silent) Recognize outdoor mode), open the camera and other apps in the mobile phone to record and record videos.
Product parameters
- Frequency range: 2 4G Rated input: DC5V = 200mA
- working time: 7-8h SNR: ＞ 90dB
transmission distance: 15m storage temperature: – 20 ° C ~ 60 ° C Overall dimension host: 44.5mm44.5mm23m Pointing type: full directivity Frequency response range: 30hz-18khz Standard charging time: about 1 hour Charging interface: type-C charging interface Capacity: 300ah / 3 – 7V Operating temperature: t0 ° C ~ 45 ° C
Function introduction
- Receiver function introduction Rainbow on / off key: long press this key to switch on / off the machine
- Power light: always on when fully charged, slow flash when low power is about to shut down and flash quickly Charging lamp: when charging, the red lamp is always on, and the full white lamp is always on
- Briefly press the on key to turn mute on or off
- It flashes when not connected, and it is always on when connected successfully
- charging port / recording output port
Transmitter function introduction
Radio microphone head: this part needs to be aligned with the mouth for
human voice radio
Switch on / off / mode switching: long press this key to switch on / off,
and short press it to switch mode
Press the microphone to increase the volume once Microphone volume reduced:
short press once to reduce the microphone volume by one level
Power indicator: when the battery is fully charged, the indicator is
always on. When the battery is low, the indicator flashes slowly and will turn
off quickly. Flash charging indicator: when the battery is not fully charged,
the red indicator is always on, and when the battery is fully charged, the
white indicator is always on ⑥ Bluetooth indicator: blinks when Bluetooth is
not connected, and always lights up when Bluetooth is connected successfully
(Bluetooth is used as an accompaniment sound source, not for recording)
mode area:
Singing mode: suitable for live reverberation singing Live recording: no
sound, and high reverberation mode. Outdoor mode: suitable for short video
recording and live broadcasting of original sound, with high sound recovery
and no reverberation
W charging port: monitoring earphone port
Note: the transmitter defaults to outdoor mode when it is started for the
first time, and has memory function when it is started again
Matters needing attention
- Please disconnect the charger and turn it off before cleaning the machine
- Non professionals are not allowed to disassemble the equipment by themselves to avoid machine failure and loss of warranty rights and interests
- Do not place the equipment in the direct sunlight to avoid premature aging of electronic parts
- avoid using in places with flying dust or dirty environment (dust is easy to cause equipment failure)
- Do not place the equipment in a cold environment or make it unable to operate normally
- It is recommended that the setting ambient temperature should not exceed – 10 ° C-40 ° C and the relative temperature should be 10% – 95%
- Do not stuff anything into the equipment to avoid short
- The product shall not be exposed to high temperature environment such as sunshine and fire baking
- This manual contains important information, please keep it
- Avoid friction and collision between the machine and other hard objects, so as to avoid surface scratching, falling off or other hardware damage
Product warranty card
- Product model：
- Customer name：
- Date of purchase ：
- contact number：
- distributor：
- Contact address：
Maintenance record
- Warranty scope:
For non-human damage, the whole machine is guaranteed to be replaced in one month, free warranty for one year and limited maintenance within three years. Note: the company’s products are constantly innovative and subject to change without notice Manufacturer information
Product Name: wireless live broadcast collar clip
Product model: A8
Manufacturer: Shenzhen Jingyun Information Technology Co., Ltd
Address: No. 429-430, rongchuangzhihui building, Longsheng Road, Longhua
District, Shenzhen, Guangdong
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>