Perma 3129 Ultimate Extra Wide Barrier Instruction Manual

: June 1, 2024
: Perma

Table of Contents

Perma 3129 Ultimate Extra Wide Barrier
Product Information
Product Usage Instructions
SAFETY INFORMATION
WHAT’S IN THE BOX
INSTALLATION
OPERATION
WARRANTY CERTIFICATE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Perma 3129 Ultimate Extra Wide Barrier

Product Information

Specifications

Product Name: Ultimate Extra Wide Barrier
Model Number: #3129 White
Adjustable Width: 73cm – 194cm (28.8 – 76.4 inches)
Height: 75cm (29.5 inches)
Safety Standard Compliance: EN 12227:2010

Product Usage Instructions

Installation
Follow these steps for proper installation of the barrier:

Ensure the mounting surface is strong, rigid, and even.
Choose the appropriate fixing method based on the surface type (hard wall, wood, or drywall).
Use the required tools: pencil, Phillips head screwdriver, and drill.
Refer to the provided instructions for detailed mounting steps.

Barrier Placement & Configuration
To properly place and configure the barrier:

Position the barrier in a structurally sound opening.
For stair use, ensure correct positioning based on whether it’s at the top or bottom of the stairs.

Adding and Removing Panels
Follow these steps to add or remove panels:

To add panels, follow the provided installation guide.
To remove panels:
Unscrew the corner tube by turning anti-clockwise.
Press the corner tube downwards.
Release the corner tube to the side and pull upwards to release.

Operation
To operate the barrier:

Refer to page 18 of the manual for instructions on how to open the barrier.
Clean the barrier regularly following the cleaning instructions on page 19.

Spare Parts & Accessories
Refer to page 20 for information on spare parts and accessories.

FAQ

Q: What should I do if any component is damaged or missing?
A: Stop using the product immediately and refer to the warranty certificate for after-sales support.
Q: Can I install the barrier without additional support?
A: No, always ensure proper support while mounting the barrier to avoid accidents.

SAFETY INFORMATION

GENERAL
Read this instruction manual carefully and keep it in a safe place for future reference. The correct use and maintenance of this product is essential.

MAINTENANCE
Regularly check that the product is functioning correctly, lubricate hinges and moving components. Tighten and adjust mounts to ensure secure smooth operation. Inspect all components regularly and stop using if any component is damaged or missing. Refer to pages 18 & 19 for operation and cleaning instructions.

WARNING
WHEN USED AS SAFETY BARRIER.

Incorrect fitting or positioning of this safety barrier can be dangerous.
Do not use the safety barrier if any components are damaged, missing or disassembled.
Never install this product on glass doors or windows.
Stop using the product if the child is able to climb, dislodge or open barrier unassisted.
A maximum of 9 panels can be used when used as a barrier/room divider.
Danger to older children if climbing over the barrier.
Regularly check that the barrier is properly fixed and secure.
Any additional or replacement parts should only be obtained from after sales support.
This safety gate is suitable for openings from 73cm (28.8”) to 194cm (76.4”).
Before using this product, carefully inspect for any loose parts and whether any parts need to be tightened.
Children have died or been seriously injured when gates/enclosures are not securely installed.
ALWAYS install and use gates/enclosures as directed using all required parts.

WARNING
WHEN USED AS PLAYPEN.

This product is intended for use with children from 6 to 24 months or small to medium pets from 4.5kg (10 lbs) up to 18kg (40 lbs).
Do not place the barrier close to an open fire or other heat source.
Do not leave anything in the playpen which may provide a foothold or create a danger of suffocation or strangulation.
This safety barrier is for domestic use only.
This safety barrier has a manual closing system.
Ensure that the barrier is fully erected and all the locking mechanisms engaged before placing your child in this playpen.
Do not use the barrier if any part is broken, torn or missing and use only spare parts approved by manufacturer, accessories which are not approved by manufacturer shall not be used.
Check regularly that all assembly fittings are tightened properly.
Use only with the locking/latching mechanism securely engaged.
NEVER use to keep child away from pool.

MOUNTINGS
Safety barrier must be installed in a structurally sound opening. Ensure mounting surface (wall, door, stair posts, etc.) is strong, rigid and has an even surface.
Note: If the safety barrier is used at the top of the stairs, it should not be positioned below the top level. If the safety barrier is used at the bottom of the stairs, it should be positioned at the front of the lowest tread possible.

This product must only be fixed to a solid and secure surface. If unsure, check with a qualified builder or trades person that the installation you intend is suitable and safe within the chosen location.

TOOLS REQUIRED

Select the appropriate fixing method from the list below.

HARD WALL MOUNTING BRICK / CONCRETE

WOOD MOUNTING

DRY WALL MOUNTING
Locate the wood stud and follow the wood mounting instructions. Do not mount into dry wall without additional support.

WHAT’S IN THE BOX

PARTS

INSTALLATION

Barrier Placement & Configuration
Suitable placement & configuration of Barrier

To Add Panels
Align the Gate Panel and Barrier Panel together by lifting in place.

Insert Place Corner Tube into bottom hole.
Align Press down and align 90°
Tighten Corner Tube clockwise till firm.

To Remove Panels

Unscrew corner tube by turning anti-clockwise.
Press corner tube downwards.
Release corner tube to the side and pull upwards to release.

INSTALL GUIDE – BARRIER

Step 1. A – Side Assembly

1. Place C – Bracket over Corner Tube and put the Corner Tube into the hole of A – Bottom Cap.
2. Tilt and press the assembly downwards and align 90°.
3. Add A – Top onto the panel, turn the corner tube assembly clockwise till firm and in the locked position.

Step 2. B – Side Assembly

1. Place C – Bracket over Corner Tube and put the Corner Tube into the hole of the panel, add B-Bottom Cap.
2. Tilt and press the assembly downwards and align 90°.
3. Add B – Top onto the panel, turn the Corner Tube assembly Clockwise till firm and in the locked position.

Step 3. A – Side Wall Mounting

1. Use a pencil to mark screw hole positions for the A – Top & A – Bottom Brackets.
2. Disassemble Corner Tube and Barrier Panel from brackets, pre-drill and screw brackets in place.
3. Align panel onto wall brackets.
4. Replace the Corner Tube, threading through C – Bracket.
5. Tighten Corner Tube firm.

NOTE: Install the C – Brackets close to the ground and on even surface to ensure Playpen/ Barrier is secure.

Step 4. B – Side Wall Mounting

1. Use a pencil to mark screw hole positions for the B – Top & B – Bottom Brackets.
2. Disassemble Corner Tube and Barrier Panel from brackets, pre-drill and screw brackets in place.
3. Align panel onto wall brackets.
4. Replace the Corner ube, threading through C – Bracket.
5. Tighten Corner Tube firm.

NOTE: Install the C – Brackets close to the ground and on even surface to ensure Playpen/ Barrier is secure.

Step 5. Swing Direction Control Determine which direction the gate should open. Screw in Swing Direction Control piece opposite to the desired opening direction. Use images below as a guide.
NOTE: For top of stairways, the gate should never open out over stairs.

OPERATION

HOW TO OPEN

Using one hand, place thumb on the button and grip Gate Panel with fingers. Slide button and lift Gate Panel.
Open gate in either direction. When released gate will swing closed automatically.
To enable stay open feature, open gate to a 90° angle.
NOTE: Always check gate is properly closed and secure at all times.

CLEANING INSTRUCTIONS
Simply use a soft damp cloth to wipe Playpen/Barrier, dry after cleaning. Do not use chemical or abrasive cleaners.

SPARE PARTS & ACCESSORIES
Scan the QR Code to view the full range of Spare Parts & Accessories including; Additional Panels, Additional Gates, Stability Clips and Wall Mounting Sets.

WARRANTY CERTIFICATE

Congratulations! You have made an excellent choice of this quality product. Our commitment to quality also includes our service. Should you, contrary to expectations, experience defects due to manufacturing faults, we will provide you with a warranty against defects as follows:

WARRANTY
The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

PROOF OF PURCHASE
This warranty is valid for the original purchase and is not transferable. Please keep your purchase docket, tax invoice or receipt as proof of purchase and date of which the purchase was made.

EXTENT OF WARRANTY
This warranty is limited to defects in workmanship or parts. All defective products or parts will be repaired or replaced. This warranty does not cover consumable items.

NORMAL WEAR AND TEAR
This warranty does not cover normal wear and tear to the products or parts.

EXCLUSIONS
This warranty does not cover:

Any defects caused by an accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorised modification, loss of parts, tampering or attempted repair by a person not authorised by the distributor.
Any product that has not been installed operated or maintained by the manufacturer operating instructions provided with the product.
Any product that has been used for purposes other than domestic use.

TO MAKE A CLAIM
If a defect in the goods appears within 12 months, you are entitled to claim a warranty. Please contact after sales support via the link below: www.permachildsafety.com/contact-us
Please ensure that you have a copy of proof of purchase so that we can respond as quickly and efficiently as possible.

WARRANTY CARD

DETAILS: _____
PRODUCT NAME: Ultimate Extra Wide Barrier
PRODUCT NUMBER: White 3129
YOUR NAME: _____
ADDRESS: _____
PHONE: _____
EMAIL: _____
DATE OF PURCHASE: _____
LOCATION OF PURCHASE: _____

We recommend that you keep a copy of your receipt, showing the date of purchase, with this warranty certificate and keep for your reference. In the event of a product fault, please contact after sales support. Ensure that you include the product details (as shown on this card) so that we are able to respond as quickly and efficiently as possible.

AFTER HOURS SUPPORT
Scan the QR code for Live Chat Support or visit: permachildsafety.com /contact-us