PERMA BLEND Perma Pen Silver Supreme User Manual
- June 3, 2024
- PERMA BLEND
Table of Contents
PERMA BLEND Perma Pen Silver Supreme
SAFETY NOTICE
CLASS III SYMBOL
A Class III appliance is designed to be powered by a separated/safety extra- low voltage (SELV) power source. The voltage from a SELV supply is low enough that under normal conditions, a person can safely come into contact with it without risk of electrical shock. The extra safety features built into Class I and Class II appliances are therefore not required. For medical devices, compliance with Class III is not considered sufficient protection. Therefore, stricter regulations apply to such equipment.
TECHNICAL DATA
- Operating Voltage: 5-9.5 V DC
- Current: .3 A
- Stitch Frequency: 25 -160 Hz
- Stroke: 2.7 mm
- Connection: RCA cable
- Drive: Brush DC motor & drive
- Operating Mode: Continuous operation
- Ambient Temperature: +10 – +35°C /+50 – 95°F
- Relative Humidity: 30 to 75%
- Dimensions (Ø X L): 21.2 x 116.5 mm
- Weight: Approx. 82g/2.9oz
BARRIER PROTECTING YOUR MACHINE
Although only the grip is autoclavable, we strongly suggest the use of barrier products to protect your machine. For a visual demonstration of various barrier protection methods, please visit our YouTube channel at YouTube.com/microbeauintl.
“This machine is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge”
MACHINE OVERVIEW
Changing Permanent Makeup Forever
The first compact pen style machine providing artists full control of
parameters that unleash their creative vision.
Compatible with most power supplies on the market, the Perma Pen is the
solution for all your Micropigmentation (MP) needs.
THE GRIP
The Perma Pen offers artists an ergonomic grip design and a never-before-seen full machine control. The standard grip tapers from 22mm to 16mm. Other grip options may be available. The Grip is crafted from a solid rod of 6061 T6 aircraft-grade aluminum. This polished and anodized grip is safe with: steam sterilization, cold sanitation solutions, and autoclave.
THE BODY
The Body is the core of the machine that houses all its components.
Constructed from a solid rod of 6061 T6 aircraft-grade aluminum, this module
should be sanitized by wiping it with cold sterilization solutions only.
Caution: Do not introduce any types of liquid inside the system or
autoclave.
RCA CONNECTION
This connecting terminal is compatible with the Darklab Air RCA Cord. For consistent connection and machine longevity, use Darklab RCA cables.
CONNECTING YOUR MACHINE
HOW TO CONNECT YOUR MACHINE
Insert the RCA cord (4mm x 10.5mm) into the back of the machine body and connect to a Power Supply. The RCA connector jack is concealed by the machine housing.
We suggest only using high-quality RCA cords sold by anyof our companies. (Microbeau, DarkLab, FK Irons)
ADJUSTING NEEDLE DEPTH
To adjust needle depth,hold the machine body while turning the Grip.
A counterclockwise turn decreases depth, while a clockwise turn increases
depth (also known as needle hang).
Each time you turn the grip it allows you to set your needle precisely without
involuntarily turning while tattooing.
ADDITIONAL INFORMATION
VOLTAGE PARAMETERS
While voltage is a parameter that will vary from artist to artist, this
machine has been tested to operate at a minimum voltage of around 5 Volts and
a maximum voltage of 9.5 Volts.
Depending on the type of needle configuration or brand you use, feel free to
adjust the voltage to obtain your desired performance.
Note: Exceeding 9.5 Volts is not recommended.
ACCEPTED NEEDLES
Use cartridge needles with an internal membrane. This will avoid accidental
contamination inside your machine. Fluids such as ink, water or oil inside the
machine will void warranty of the device, and may require replacement of
internal parts.
MAINTENANCE
- Perma Pen is sold pre-lubricated from the factory and does not require internal lubrication.
- Prevent any type of external elements from entering inside the machine as they will disrupt the motion of the component and contaminate lubrication.
- Only the grip of the machine is autoclavable. Use only steam autoclaves at temperatures no higher than 270° or 132° C. Add a hint of ointment or PTFE grease around internal opening of grip or on stabilizing friction O-rings for optimal functionality after autoclaving.
- Machine Body can be sanitized from the outside with cold sterilization products.
- Never spray the surface directly to prevent fluids from entering the machine. Always use pads or disposable paper towels to apply sterilization products.
WARRANTY
- All the housing components (Grip, Machine Body) are covered by a lifetime warranty.
- Internal parts are subject to wear and the motor itself will be covered by a 1-year warranty from the date of purchase.
- Motor warranty is voided if motor shows signs of being dropped, internal fluids with in the motor and/or motor shows signs of being tampered with in any way.
HANDY TIPS
The following tips will help you get the most out of your Perma Pen and avoid
potential issues:
- Always secure your machine. Dropping the machine can cause damage to the magnets, bearings and motor brushes.
- Use only cartridges with membranes to avoid contamination.
- Do not exceed the suggested voltage.
- Always use power supplies with at least 1Amp of current supply.
- Rinse your needle frequently to avoid pigment drying up and slowing down your cartridges.
- When rinsing your needle, ensure to dip only the tip of the cartridge to avoid fluids back flow.
- Inspect your needles prior to use.
- Use only high-qulaity RCA cords. A good connection will ensure consistent performance.
- Avoid scratching the surface of the embodiments.
- Use only FDA-approved cold sterilization solutions for disinfection.
- Do not lubricate machine unless instructed otherwise.
- Store your machine in a secure place.
TROUBLESHOOTING
-
B
FK Irons: 1771 NW 79th Avenue, Doral, Florida 33126 -
Servicing your machine
Just like any mechanical device subject to use, FK Irons strongly suggests that you service your product at least once a year to ensure that a proper diagnosis of all working parts is conducted. This ensures the optimal condition of all working parts including internal machine clean up and fresh lubrication. Routine servicing will ensure that your machine remains functioning like the very first day. Service is subject to fees. -
Warning
Disconnect machine from any power source before making any adjustments.
For service inquiries, please contact
service@fkirons.com.
For additional tips and tutorials, please visit
www.youtube.com/MicroBeauIntl