HILTI HIT-CT 100 Injectable Adhesive Anchor Instruction Manual

: June 13, 2024
: HILTI

Table of Contents

HILTI HIT-CT 100 Injectable Adhesive Anchor
Product Information
Product Usage Instructions
FEATURES
HOW TO USE
Disposal considerations
Product Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HILTI HIT-CT 100 Injectable Adhesive Anchor

HILTI-HIT-CT-100-Injectable-Adhesive-Anchor-PRODUCT

Product Information

The Hilti HIT-CT 100 is an adhesive anchoring system designed for rebar and anchor fastenings in concrete. It contains dibenzoyl peroxide, which is harmful to aquatic life with long-lasting effects. The product may also produce an allergic reaction. It is important to follow the instructions for use and safety precautions provided by Hilti. Failure to do so may result in damage or failure caused by improper storage and transportation, failure to observe instructions, inadequate design of anchor points, inadequate load- bearing capacity of the base material, incorrect use, or other unknown influences. Hilti accepts no liability for such damage or failure, especially when the product is used in conjunction with third-party products. It is recommended to wear safety glasses, gloves, and protective clothing during installation to prevent mortal splashes. It is also important to always use a properly screwed-on mixer and avoid using damaged foil packs and unclean foil pack holders. When filling boreholes, ensure that air voids are not formed and use accessories or extensions if necessary. For overhead applications, special care should be taken to prevent excess adhesive from dripping onto the installer. If a new mixer is installed onto a previously opened foil pack, the first trigger pulls must be discarded. In water-saturated concrete, it is necessary to set the anchor immediately after cleaning the borehole to avoid failure of fastening points.

Product Usage Instructions

Prior to using the product, read the user manual and safety precautions.
Ensure you have the necessary safety equipment, including safety glasses, gloves, and protective clothing.
Always use a properly screwed-on mixer and never start dispensing without one.
Attach a new mixer before dispensing a new foil pack, ensuring a snug fit.
Only use the type of mixer supplied with the adhesive and do not modify it in any way.
Avoid using damaged foil packs and unclean foil pack holders (cassettes).
Fill boreholes from the back without forming air voids. Use accessories or extensions if needed.
Take special care when inserting the fastening element for overhead applications to prevent mortar drips onto the installer.
If installing a new mixer on a previously opened foil pack, discard the first trigger pulls.
In water-saturated concrete, set the anchor immediately after cleaning the borehole to ensure proper fastening.

FEATURES

HILTI-HIT-CT-100-Injectable-Adhesive-Anchor-FIG-2

Dry concrete;
Water saturated concrete;
Hammer drilling;
Hollow drill bit;
Uncracked concrete;
Cracked concrete;
Temperature of concrete;
Working time;
Curing time

Hilti (Gt. Britain) Ltd. 1 Trafford Wharf Road Trafford Park GB-M17 1BY Manchester Tel +44 161 886 1000

HOW TO USE

HILTI-HIT-CT-100-Injectable-Adhesive-Anchor-FIG-3

Prior to the use of the product, follow the instructions for use and the safety precautions.

Contains: dibenzoyl peroxide

Harmful to aquatic life with long-lasting effects.
Contains dibenzoyl peroxide. May produce an allergic reaction.

Disposal considerations

Empty packs: Leave the mixer attached and dispose of via the local Green Dot recovery system or EAK waste material code: 150102 plastic packaging.
Full or partially emptied packs: Must be disposed of as special waste in accordance with official regulations. | EAK waste material code: 20 00 00* MUNICIPAL WASTES (HOUSEHOLD WASTE AND SIMILAR COMMERCIAL, INDUSTRIAL AND INSTITUTIONAL WASTES) INCLUDING SEPARATELY COLLECTED FRACTIONS. | or European waste catalogue: 08 04 10 waste adhesives and sealants other than those mentioned in 08 04 09.
Content: 330 ml / 11.1 fl.oz; 500 ml / 16.9 fl.oz
Weight: 600 g / 21.1 oz; 910 g / 32.1 oz

Hilti accepts no liability for damage or failure caused by: Storage and transport not in accordance with the specified conditions | Failure to observe the instructions for use and setting data | Inadequate design of the anchor points | Inadequate load-bearing capacity of the base material | Incorrect use | Other influences of which Hilti is not aware or on which Hilti has no influence, e.g. use with products from a third party

Product Information

Always keep these instructions together with the product even when given to other persons.
Check expiration date: See imprint on foil pack manifold (month/year). Do not use expired products.
Foil pack temperature during usage: +5 °C to 40 °C / 41 °F to 104 °F.
The base material temperature at the time of installation: 0 °C to 40 °C / 23 °F to 104 °F.
Conditions for transport and storage: Keep in a cool, dry and dark place between +5 °C to 25 °C / 41 °F to 77 °F. | For any application not covered by this document / beyond the values specified, please contact Hilti.

Partly used foil packs must be used up within 4 weeks. Leave the mixer attached to the foil pack manifold and store it under the recommended storage conditions. If reused, attach a new mixer and discard the initial quantity of anchor adhesive. A new mixer must be used for each new foil pack.

WARNING

Improper handling may cause mortar splashes. We recommend wearing safety glasses, gloves and protective clothes during installation. | Never start dispensing without a mixer properly screwed on. | Attach a new mixer prior to dispensing a new foil pack (ensure a snug fit). | Use only the type of mixer supplied with the adhesive. Do not modify the mixer in any way. | Never use damaged foil packs and/or damaged or unclean foil pack holders (cassettes).

Poor load values / potential failure of fastening points due to inadequate borehole cleaning. Hilti hollow drill bits TE-CD, and TE-YD must be used in conjunction with a properly maintained Hilti vacuum cleaner with model and suction capacity (volumetric flow rate) as specified in the accessory table. | The boreholes must be free of debris, dust, water, ice, oil, grease and other contaminants prior to adhesive injection. | For blowing out the borehole – blow out with oil-free air until return air stream is free of noticeable dust. | Important! Remove all water from the borehole and blow out with oil-free compressed air until the borehole is completely dried before mortar injection. | For brushing the borehole – only use a specified wire brush. The brush must resist insertion into the borehole – if not the brush is too small and must be replaced.

Ensure that boreholes are filled from the back of the borehole without forming air voids. If necessary use the accessories/extensions to reach the back of the borehole. | For overhead applications use the overhead accessories HIT-SZ / IP and take special care when inserting the fastening element. The excess adhesive may be forced out of the borehole. Make sure that no mortar drips onto the installer. | If a new mixer is installed onto a previously- opened foil pack, the first trigger pulls must be discarded. | In water- saturated concrete, it is required to set the anchor immediately after cleaning the borehole.