rizoma PE724 Pro B Street Rider Passenger Footpeg Mount Kit User Manual
- June 1, 2024
- rizoma
Table of Contents
rizoma PE724 Pro B Street Rider Passenger Footpeg Mount Kit
Specifications
- Brand: Rizoma
- Model: Peg Mounting Kit
- Part Number: PE724
- Difficulty Level: Simple
- Estimated Assembly Time: 5-10 minutes
Product Usage Instructions
Installation Guidelines:
Ensure to carefully follow the installation instructions provided in the manual:
- All tightening should be done after correctly positioning the accessories without forcing the moving parts.
- Verify compatibility with your motorcycle and any aftermarket accessories.
- For safety reasons, contact an authorized RIZOMA dealer for assistance.
Post-Installation Checks
After installing the product, make sure to check the functionality of
related motorbike components like brakes, throttle, clutch, lights, and
steering. Repeat these checks periodically, especially after long trips or
extended periods of non-use.
Inspection and Maintenance
Regularly inspect and maintain your RIZOMA products. If any signs of damage
are visible (leaks, bends, cracks, etc.), have a RIZOMA dealer inspect the
products before using the bike again. Do not attempt to repair or modify the
products; always replace with Rizoma original components.
Welcome to Rizoma
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate
you for your excellent choice. Please carefully follow the instructions in
this guide, which will allow you to mount and use the product correctly and
enjoy all the features it has. For your protection and safety, RIZOMA
expressly recommends that you have the installation of the product performed
by skilled personnel. Improper installation, repair or maintenance, can cause
accidents. Keep this user guide as a reference for the future. RIZOMA accepts
no liability for any damage, of any kind, which may be caused, directly or
indirectly, to persons or things as a result of incorrect assembly or failure
to observe all the assembly instructions. We also invite you to comply with
the provisions of the Highway Code and Traffic rules and/or to additional
regulations in force in your Country
General conditions
O.E.M.: componenti originali.
Attention: This component comes assembled for shipping purposes only.
Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or
procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest repeating these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case, never try to repair or modify the Rizoma products or their components, always replace them with Rizoma original components.
Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety, Rizoma suggests always contacting your RIZOMA dealer.
O.E.M.: original equipment manufacturer.
PARTS
PART NUMBER PE724
Consult the website www.rizoma.com, in peg section, click “MEDIA” to download the PDF document approval TUV.
Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components. Warning: Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others.
WARNING: TO CLEAN YOUR PRODUCT DON’T USE DETERGENT, AGGRESSIVE PRODUCTS OR ABRASIVE SPONGES THAT CAN DAMAGE OR SCRATCH YOUR PRODUCT, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.
Verify the operation of the foot brake, the brake light, and the shift lever
before riding. Improper installation could lead to loss of function and loss
of motorcycle control, resulting in an accident, personal injury or death.
Jumping, stunt riding and excessive standing will lead to breakage of the rear
set controls, resulting in loss of motorcycle control, an accident, personal
injury or death.
INSTALL DRIVER ADAPTER
Mount valid for both sides
INSTALL PASSENGER ADAPTER
Mount valid for both sides
Mount valid for both sides
INSTALL PEG
Mount valid for both sides
Warnings
- RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.
- The action depicted is performed by professionals under strictly controlled riding conditions.
- Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.
- All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full-face helmet), that has been approved by ANSI, SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding styles, such as full-finger gloves, boots, and body armor.
- Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other parts installed on your motorcycle.
- Be sure that your tyres are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tyre.
Legal notes
- Some of our products may not be approved for road circulation in the countries where homologation is required.
- Thus RIZOMA® srl declines any responsibility for a different use of its products.
FAQ
Frequently Asked Questions
- Q: What should I do if I encounter compatibility issues with my motorcycle?
- A: If you face compatibility problems with your motorcycle or other aftermarket equipment, always contact your authorized RIZOMA dealer for guidance to ensure safety.
- Q: Can I perform repairs or modifications on RIZOMA products?
- A: It is not recommended to repair or modify RIZOMA products or their components. In case of damage, always have them inspected by a RIZOMA dealer and replace them with original components.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>