BuliBoao R4 AC Bracket Instructions
- June 1, 2024
- BuliBoao
Table of Contents
BuliBoao R4 AC Bracket
- A line drawing of the LS Truck R4 AC Bracket is presented.
- The image shows a robust metallic bracket with multiple holes for bolts and accompanying hardware such as spacers, nuts, and washers.
- Each component is labeled with its specific measurements and details.
Specifications
| Component | Description | Quantity |
|---|---|---|
| Main bracket | – | 1 |
| 3/8-16 x 4.00″ S.H.C.S. | Bolt | 2 (B-340) |
| 3/8-16 x 2.500″ S.H.C.S. | Bolt | 1 (B-325) |
| M10 x 140mm S.H.C.S. | Bolt to engine head | 1 (BM10-140) |
| M10 x 80mm S.H.C.S. | Bolt | 2 (BM10-80) |
| 2.400″ Spacer | (S3-2.400) | 2 Pieces |
| 1.800″ Spacer | (Spacer goes between AC compressor and engine head) | 1 |
(S3-1.800)
3/8″ Nut| (N-38)| 3 Pieces
3/8″ Washer| (W-38)| 2 Pieces
Component Details
- 1.800″ Spacer: This spacer (S3-1.800) is designed to be placed between the AC compressor and the engine head.
- M10 x 140mm S.H.C.S. (BM10-140): This is a bolt that secures the bracket to the engine head.
- 3/8″ Nut (N-38): Two of these nuts are used with washers, and one is used on the backside, as indicated in the diagram.
- 3/8″ Washer (W-38): These washers are used in conjunction with the 3/8″ nuts.
- 3/8-16 x 4.00″ S.H.C.S. (B-340): These bolts are part of the hardware used to attach the bracket.
- 2.400″ Spacer (S3-2.400): Two of these spacers are included in the assembly.
- M10 x 80mm S.H.C.S. (BM10-80): Two of these bolts are included and are used in securing the bracket.
- 3/8-16 x 2.50″ S.H.C.S. (B-325): This bolt is used in conjunction with a 3/8″ nut, which goes on the backside of the bracket.
FAQ
What is the purpose of the spacers in this bracket assembly?
The spacers are used to ensure proper alignment and spacing between the AC compressor and the engine head, as well as within the bracket assembly itself for secure mounting.
Can the nuts and bolts be interchanged with parts of different sizes?
No, the nuts and bolts specified in the diagram are designed to fit the particular holes and threading of the bracket assembly. Using different sizes may compromise the integrity of the assembly.
Are additional tools required for the assembly of the LS Truck R4 AC Bracket?
While the diagram and list specify the components of the bracket, tools such as wrenches will be required to tighten the nuts and bolts during assembly.
OVERVIEW
LS TRUCK R4 AC BRACKET
List:
- Main bracket.
- 2 (B-340) 3/8-16 X 4.00″ S.H.C.S.
- 1 (B-325) 3/8-16 X 2.500″ S.H.C.S.
- 1 (BM10-140) M10 X 140mm S.H.C.S.
- 2 (BM10-80) M10 X 80mm S.H.C.S.
- 2 (S3-2.400) 2.400″ Spacer.
- 1 (S3-1.800) 1.800″ Spacer.
- 3 (N-38) 3/8″ Nut.
- 2 (W-38) 3/8″ Washer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>