aquapolis LED028 ED Underwater Light Instruction Manual

aquapolis LED028 ED Underwater Light

Product Usage Instructions

Installation

• The LED028 ED Underwater Light can be fixed on various types of pools including concrete, stone wall pools, thin wall pools, fibreglass wall pools, metal wall pools, or wooden wall pools with liner.
• It can be threaded into the 1.5” female-thread wall fitting or conduit/pipe.

Programs

• The light comes with 16 programs for RGB LED Bulbs offering different color combinations and animations.
• Some programs include slow animations in various colours, fixed colour options, and fast animation settings.

Replacement

• If the light needs replacement, ensure to use a lamp of the same model and characteristics.
• Unfasten the lamp from the wall fittings, disconnect the wire, connect the wire to the new lamp, fasten the new lamp with the nut, and then reattach the light back to the wall fittings.

FAQ

• Q: What is the warranty for the LED028 ED Underwater Light?
• A: The manufacturer provides a one-year warranty against defects in materials and workmanship from the date of purchase. This warranty does not cover damages due to misuse, improper handling, or installation errors.
• Q: Can the LED028 ED Underwater Light be used in all types of swimming pools?
• A: The light is suitable for use in various swimming pool types including concrete pools, fibreglass pools, and others as mentioned in the manual. Ensure proper installation according to the instructions provided.

IMPORTANT: This manual includes essential information on the safety measures to be implemented for installation and start-up. Therefore, the installer, as well as the user, must read these instructions before beginning installation and start-up.

Technical Specification

• Standard input voltage: 12V AC/DC (Range: 12~18V AC or DC)
• Standard input watt:
  • RGB / White
  • 6W / 7W
• Use life: 60,000 hours
  • 16 programs with Synchronization capability
• Dimensions:

Packing Contents

• The following items are included inside the box:
• Lamp Assembly x 1
• Cable Nut x 1
• Rubber Ring x 1

Instruction & Use

This is a high technology electronically controlled light based on leds in three colours: red, green and blue. These three base colours together can produce many other colours to create the perfect atmosphere in the pool. Any of the 16 pre-programmed effects can be selected with the on/off switch of your pool lights. The LEDs can also be warm white only or natural white only. The LEDs are driven by constant current. The technology of True PWM is adopted on the lights. High-temperature protection makes the LEDs be protected when the internal temperature reaches a high level. All these technologies guarantee the long working life of LED lamps. The lights must be used/operated while fully submerged underwater only.

• This lamp is designed to be fixed in new pools and/or pools with existing surface-mounted lamps that need replacement.
• This lamp is designed to be used only once. Should it become defective, repair is impossible, and replacement is necessary.
• The manufacturer is not responsible in any circumstances for the assembly, installation or start-up of any electric components that have been inserted or handled at locations other than its own premises.

16 Programs of RGB LED Bulbs

1. White: sun white
2. Red: one colour red
3. Green: one colour green
4. Blue: one colour of blue
5. Green-blue: fixed color green/blue
6. Red-green: fixed colour red/green
7. Blue-red: fixed colour blue-red
8. Evening Sea: slow animation red/blue
9. Evening Rivers: slow animation red/green
10. Riviera: slow animation green/blue
11. White: neutral white
12. Rainbow: slow animation blue/red/green
13. River of Colours: program 12, followed by Program 15
14. Disco: fast animation
15. Four Seasons: slow animation in red/blue/green/violet
16. Party: fast animation

Installation

All lamps should be placed on the wall of the pool below the water surface, in areas that are easily accessible from the upper edge of the pool.

• All lamps should be installed on the same transformer and switch.
• The lights can be installed for both concrete pools and fibreglass pools.
• The lights fit into standard 1.5’’ wall fittings of swimming pools.

The light can be fixed on concrete or stone wall pools, thin wall pools, fibreglass wall pools, metal wall pools, or wooden wall pools with liner.
It can be threaded into the 1.5’’ female-thread wall fitting or conduit/pipe

Concrete & tileII

Fibreglass

Concrete & liner

Panel & Liner

• The parts marked with * are not included and need to be bought separately.
• The parts marked with ** are not included.

The below drawing shows how to connect the cable from the lamp to the power source.

Maintenance & Replacement

There is no maintenance required for this lamp – it is designed to be used only once, meaning that replacement is necessary if it becomes defective (repairing is impossible). Before any handling, ensure that there is NO voltage supplied to the lamp. The light is designed to be replaced without cutting any cable. To replace, unfasten the lamp from the wall fittings, unfasten the nut and disconnect the wire. Then connect the wire to a new lamp fasten the new lamp with the nut, and then fasten the light back to the wall fittings. Ensure the new lamp is of the same model and characteristics as the one being replaced.

Start-up

• The lamp should only operate underwater while secured to the vertical walls of the pool. Never switch on the lamp if it is not underwater.
• In case of coloured lamps, 16 pre-programmed effects and combinations may be selected using the on/off switch of your pool lights. Just switch it off and switch it on within 2 seconds.
• If the light is powered off for more than 20 seconds, it will keep the latest program when it is turned on again.
• To achieve synchronization, confirm all lamps are installed correctly on the same switch, they are powered off for more than 20 seconds, switch on and switch off continuously three times, and then finally turn them on again. They will all go to program 5.
• Now you can select a program for them by switch off and on within 8 seconds.
• Alternatively, we recommend using our optional controller (with an in-built safety transformer)which comes with (a) remote control for easy operation and (b) auxiliary connection of 24V for operation of any other electrical item.

Safety Warnings

• The persons who are in charge of installation should have the required qualifications for this type of work.
• Avoid making contact with the electric voltage.
• Comply with the current standards regarding accident prevention.
• IEC 364-7-702 standards must be observed: WIRING IN BUILDINGS, SPECIAL WIRING, SWIMMING POOLS.
• Replacement must be performed with the lamp disconnected from the electric power system.
• Do not handle any electrical components with wet feet.

Warranty

• The manufacturer warrants these LED underwater lights against defects in materials and workmanship for one year from the date of purchase.
• This warranty does not cover the fixture becoming damaged due to misuse, accidental damage, improper handling and/or installation and specifically excludes liability for direct, incidental or consequential damages.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>