WULKEN 66002552 Self Leveling Cross Line Laser User Guide
- June 1, 2024
- WULKEN
Table of Contents
WULKEN 66002552 Self Leveling Cross Line Laser
Product Information
Specifications
- Classification: Laser Level
- Laser Wavelength: 66002552
- Power Source: 2 x AA Batteries
- Ingress Protection: IP54
- Range: 98′ 5 (30 meters)
FAQ
- Q: How often should I perform accuracy checks on the laser tool?
- A: It is recommended to conduct accuracy checks before the first use and periodically during future operations, especially when precise layouts are required.
- Q: What should I do if the low battery indicator turns on?
- A: When the low battery indicator activates, both replace batteries with new identical ones to ensure optimal performance of the laser tool.
CAUTION:
READ AND FOLLOW ALL SAFETY AND USE INSTRUCTIONS IN THIS GUIDE BEFORE USING THIS PRODUCT.
SAFETY INSTRUCTIONS
- Be careful not to expose your eyes to the emitting laser beam as exposure to a laser beam for an extended time may be hazardous to your eyes.
- Eye exposure to the beam of this laser is considered safe for a maximum of 1/4 second. Your blink reflex will normally provide adequate protection.
- Do not stare directly into the beam or view directly with optical instruments or set up the laser at eye level.
- Do not disassemble the laser tool. There are no user serviceable parts inside.
- Do not modify the laser in any way.
- Modifying the tool may result in hazardous exposure to laser radiation.
- Do not operate the laser around children or allow children to operate the laser.
- Keep batteries out of reach of children.
- Do not store the laser tool in direct sunlight or expose it to high temperatures.
- The housing and some internal parts are made of plastics and may become deformed at high temperatures.
MAINTENANCE
- The laser tool is sealed and calibrated at the plant to the accuracy specified.
- It’s recommended to carry out an accuracy check before its first use and periodic checks during future use especially for precise layouts.
- Do not short-circuit any battery, charge alkaline batteries or dispose of batteries in fire.
- Do not mix old and new batteries. Replace both of them at the same time with new identical batteries.
- Remove batteries if the tool will not be used for several months.
- Exterior plastic parts may be cleaned with a damp cloth. Never use solvents. Use a soft, dry cloth to remove moisture from the tool before storage.
Appliances and batteries must not be put in the household garbage, they must be recycled.
SPECIFICATIONS
| CLASSIFICATION | CLASS 2 |
|---|---|
| LASER WAVELENGTH | 505 – 550 NM |
| ACCURACY | ±1/8″ (3 MM) À / T O 32′ 10″ |
(10 M)
LEVELING RANGE| 4° (±1°)
WORKING DISTANCE| 98′ 5″ (30 M)
| MODE 1 : 7
OPERATING TIME (HOURS)| MODE 2 : 10
| MODE 3 : 13
| MODE 4 : 16
POWER SOURCE| PILES / BATTERIES AA X 2
INGRESS PROTECTION| IP54
OPERATION TEMPERATURE RANGE| – 10 °C – 50 °C (
1 4 °F – 122 ° F )
STORAGE TEMPERATURE RANGE| -025 °C – 75 °C (- 1 3
°F – 167 °F)
POWER-SAVING MODE| 4 BRIGHTNESS SETTINGS.
---|---
SELF-LEVELING AND MANUAL MODES| THE LASER SELF-LEVELS IF PLACED ON A FLAT
SURFACE WITHIN AVERAGE ±4° OF LEVEL.
IP54| RESISTANT TO DUST, WATER AND SHOCKS.
PULSE MODE| WORKS WITH A DETECTOR TO EXTEND DISTANCE RANGE
(SOLD SEPARATELY).
OVERVIEW
OPERATION
Keep the switch in locked position when you are not using the laser and before inserting or changing batteries.
AUTO SELF-LEVELING MODE
- Place the switch in unlocked position to turn on in self-leveling mode. The laser light flashes when it is 4° out of level.
MANUAL MODE
- When the switch is in locked position , press and hold the key button for 3 seconds. This mode allows to use the laser manually at any angle.
POWER-SAVING MODE
- When the laser is turned on, short press the key button a 1st time to reduce the brightness to 75%; a 2nd time to reduce to 50%; a 3rd time to reduce to 25%; a 4th time to restore the maximum brightness
PULSE MODE (DETECTOR SOLD SEPARATELY)
- Short press the key button to turn the pulse mode on. Long press again to switch off the pulse mode.
LOW BATTERY ALERT
- When the battery is low, the red indicator flashes. When the battery is very low, the red indicator light stays on and the laser line is turned off.