WULKEN 66002269 Adjustable Sawhorse User Guide

: June 2, 2024
: WULKEN

Table of Contents

ONE-YEAR LIMITED WARRANTY
SETUP INSTRUCTIONS
FOLDING
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

WULKEN 66002269 Adjustable Sawhorse User Guide

ONE-YEAR LIMITED WARRANTY

NOVELCA offers a limited warranty for this product (hereafter: the “Product”) for one (1) year from the date of purchase of this Product, with the conditions set out below.
This limited warranty is valid only for the original purchaser of the Product and it may not be transferred.
The present limited warranty is not meant to exclude, restrict, limit or modify the legal warranty given by law to the purchaser of the Product.
If the Product contains a manufacturing defect or if one or more parts of the Product is defective, the retailer commits to replace or repair, at its sole discretion, the defective part or parts without charge under the following cumulative conditions:

the purchaser must contact the retail store where the Product was purchased; 2) the purchaser must return the defective part or parts or the Product to the retailer; 3) the purchaser must provide the retailer the invoice as proof of purchase and date of purchase of the Product; 4) the purchaser must supply the Product identification information, including the serial number or the model number; and 5) the period of one (1) year covered by this limited warranty must not be expired. If the retailer decides to replace the defective part or parts, the replacement part or parts would be new or reconditioned, equivalent to new parts. The present limited warranty does not create any other obligation with the provider of the guarantee than those explicitly described above.
This limited warranty is not applicable: 1) to consumable parts; 2) to normal wear; 3) when the Product is used for other purposes than what is described in the user guide (if any); 4) when the serial number or other identification information of the Product is erased or withdrawn; 5) to damages that are only aesthetic and do not affect the normal use of the Product; 6) when the damages, defects, faults or other problems arise from: a) an inadequate maintenance of the Product;
b) a faulty installation or assembly of the Product or an installation or assembly that is not in accordance with the user or installation guide (if one is provided); c) a modification, a repair or dismantling of the Product by a person not authorized by the retailer or the manufacturer; d) the transportation by the purchaser, his employee, officer or representative;
e) a negligence by the purchaser, his employee, officer or representative; f) an accident; g) a case of force majeure or any event that is not caused by the Product itself.

FRENCH VERSION VS ENGLISH VERSION
In case of discrepancy between the French and the English versions of the text of this limited warranty, the French version shall prevail.

WARNINGS

When lifting the sawhorse, use proper lifting techniques to avoid personal injury.
Ensure the work area is well lighted while working.
Ensure the sawhorse is standing on a level surface that is clear, dry, and free of debris.
Ensure all 4 legs are in solid contact with the floor. If the sawhorse is not positioned level and straight, loads placed upon it could fall, potentially causing damage to the items loaded on it or possible severe personal injury or death.
Ensure the load placed on the sawhorse does not exceed the maximum load capacity. Overloading can lead to failure of the product, potentially causing damage to the items loaded on it or possible severe personal injury or death.

CAUTION:

DO NOT APPLY WEIGHT IN EXCESS OF 1300 LB (590 KG) OF UNIFORMLY DISTRIBUTED LOAD ON THE SAWHORSE. DO NOT USE AS A STEP LADDER OR STANDING PLATFORM.
LEGS MUST BE LOCKED WHEN OPENED.

SETUP INSTRUCTIONS

Sawhorse in folded/transport position.
Press the release button and pull down the legs until the supports are fully deployed.
Separate the legs and press down on the cross brace until it is flat.
Press the release button and fold down the legs until the supports are fully deployed.
Separate the legs and press down on the cross brace until it is flat.
The legs adjust in increments of 1” (2.5 cm). To extend, pull the legs down until the latch locks at the desired position. To shorten, press the lock button, pull the legs down slightly then push the legs up.
When paired with a second unit and properly assembled with support arms, a work table can support up to 2601 LB (1180 KG).