hama PD10-HD 10000mAh Power Bank User Manual

00 201662
“PD10-HD”
10000mAh
Power Pack

PD10-HD 10000mAh Power Bank

Operating instruction
Thank you for choosing aHama product.
Take your time and read the following instructions andinformation completely.Please keep these instructions in asafe place for futurereference. If you sellthe device, please pass these operating instructions on to the new owner.

Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specifichazards and risks.
Note
This symbol is used to indicate additional information or important notes.

High-density lithium-polymer cells
This product contains high-density lithium-polymer cells. High-density cells weredeveloped mainly forsmartphone production in order to meet the high capacity andperformance demands usinga minimum amount of space. This newgeneration of lithium-polymer cells enables alightweight and compact design along with acomparativelyhigh capacity.

Package Contents

• Power Pack “PD10-HD”,10000mAh
• USB-C to USB-C cable
• These operating instructions

Safety Notes

• Use the product for its intended purpose only.
• Protect the product from dirt, moistureand overheating, andonlyuse it in adry environment.
• Do not use the product in the immediate vicinity of heaters or other heatsources or in direct sunlight.
• Keep this product, as allelectrical products, out of the reach of children!
• Do not drop the product and do not expose it to anymajor shocks.
• Do not operate the product outside the power limits given in the specifications.
• Do not open the device or continuetooperate it if it becomes damaged.
• Dispose of packaging material immediatelyaccordingtolocally applicable regulations.
• Since the battery is integrated and cannot be removed,you willneed to dispose of theproduct as awhole. Do this in compliance with the legal requirements.
• Do not modify the product in any way.Doing so voids the warranty.
• Do not use the product in areas wherethe use of electronic devices is notpermitted.
• Do not attempt to service or repair the product yourself.Leave anyand allservice work to qualified experts.
• Do not throw the battery or the product into fire.
• Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.

Operation

4.1 Charging the Power Pack

Warning –Battery

• Do not charge the power pack using yourPCorthe notebook. Thecharging currents can damage the USB port of the PC/notebook.
• Only use suitable charging devicesorUSB connectionsfor charging.
• As a rule, do not charge devicesorUSB connections that aredefective anddonot try to repair them yourself.
• Do not overcharge the product or allow the battery to completely discharge.
• Avoid storing, charging or using the device in extreme temperatures andextremely low atmospheric pressure(for example, at high altitudes).
• When stored over along period of time, batteriesshould be charged regularly (atleast every threemonths).
• Begin charging the power pack by connecting theincluded USB-CtoUSB-Ccable tothe power pack’sUSB-C (IN 5V/3A; 9V/2A)port and to asuitable USB-C charger.Alternatively,the power pack can also be charged via the Micro-USB port. Forthis purpose, connect aMicro-USB cable to the Micro-USB input (IN 5V/2A; 9V/2A)onthe power pack andtoasuitable USB charger.Please refer to the operating instructions for the USB charger used.
• Charging begins and ends automatically.
• Charge the Power Pack fully beforeusing it for the first time.

Note –Capacity

• The capacity is always shown when the Power Pack is charging.
• Each status LED corresponds to 25% of the capacity.WhenanLED is permanently illuminated, thisindicates that this capacity level has already been reached. The Power Pack is charged to at least 75% if three LEDs areilluminated, and the fourth is flashing.
• If all four status LEDs light up, the fullcapacity is available.
• Press the button of the Power Pack to switch it on andtocheck its currentcapacity.
• To switch the power pack off,press the button twice until the status LEDs go out.

4.2 Charging terminal devices
Warning –Connecting terminal devices

• Before connecting a terminal device, check whether the power output of the charger can supply sufficient power for the device.
• Ensure that the total power consumption of the connected terminal device does notexceed 3000 mA.
• Please refer to the instructions in the operating manual of your terminal device.
• It is essential that you observe these specificationsand the safety instructions regarding the power supplyofyour devices.
• The power pack must not be charged and dischargedatthe sametime!
• Please do not use the USBand USB-C outputs simultaneouslyfor charging, as this reduces the charging current considerably.Asaresult, the charging time is greatly increased andthe power pack may be overloaded.

Warning

• Never connect the charging cable of the Power Pack to both the input andthe output of the Power Pack at the same time. This could damage the battery.
• Do not connect any terminal devices while the Power Pack is charging. This could damage the Power Pack and the connected device.
• Connect the included USB-C charging cable to the USB-C port onthe power pack (OUT 5V/2.4A; 9V/2A; 12V/1.5A –18W PD)and to the USB-C port on your terminal device (mobile phone, smartphone, etc.).
• The Micro-USB charging/connecting cable included may notbesuitable for the USBconnection on your terminal device. In this case, use the USB cable that was included with your terminal device.
• When using the USB-Aoutput (OUT 5V/2.4A; 9V/2A; 12V/1.5A –QC3.0)for charging, please connect asuitable USB charging cable to the power pack’sUSB-A outputand to the port of your terminal device.
• Charging begins automatically.The status LEDs show the remaining capacity when the Power Pack is charging.
• The current battery status of your terminal device willappear on this device.
• Press the button on the power pack twice to stop charging andswitch it off.The status LEDs should switch off.
• The Power Pack willautomatically switch off if it is not connected to aterminal device.

Note –Optimised charging
Optimised charging means that the Power Pack recognises the connected terminal device and supplies it with theoptimal current to minimise chargingtime. Please note that the maximum power output of the power pack is 3000 mA.

Note –Power Delivery /QC3.0,2.0  ****

• Plug &go: No manual setup necessary,just connect andstart: Voltage and power areautomatically configured by Power Delivery /QC3.0, 2.0.
• For efficient and optimised charging, the Power Delivery (PD) /QC3.0, 2.0 function must be supported by your terminal device.
• With the large quantity of PD /QC-enabledterminaldevices with different firmware versions, it can happen that thefunction is not fully supported.

Care and Maintenance

Only clean this product with aslightly damp, lint-free cloth anddonotuse aggressive cleaning agents.

Warranty Disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of theproductorfromfailuretoobserve the operating instructions and/or safetynotes.

Technical Data

USB-C: 6601mAh @5V 2A
USB-A(QC): 6365mAh @5V 2,4A
3295mAH@9V 2A
2548mAh@12V 1,5A
USB-C (PD): 6025mAh@5V 3A
3228mAh @9V 2A
2452mAh @12V **** 1,5A

*The usable capacity is the capacity that can be drawnfromthe output sockets.

Hama GmbH &CoKG
86652 Monheim/Germany
Service &Support
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies.
Errors and omissions excepted,and subject to technical changes.
Our general terms of delivery and payment are applied.

References

• hama.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>