PARWIN PRO BEAUTY UK-PW-AB0326-4P High Speed BLDC-Motor Instruction Manual

4 IN 1 MaxAIR Styler
High Speed BLDC-Motor
Drying + Styling + Curling + Volumizing

4 IN 1 MaxAIR Styler SET

DESCRIPTION

Parts:
A. Hot air brush attachment
B. Attachment Release button
C. Host Handle
D. Heat and speed adjustment
E. Switch
F. Airflow inlet
G.Massage brush attachment
H.Blow dryer attachment
I. Airflow curler attachment
Specifications:
Model: UK-PW-AB0326-4P
Input voltage: 220-240V
Power: 1000W
Power cord: 1.8m
Noise level: ≤80dB
Max Airflow speed: 17m/s

IMPORTANT SAFETY ADVICE

Please follow the instructions on the manual to use the product, Failure to comply with the manual will result in poorer performance of your appliance.
This appliance is suitable for EU voltage (220-240V). Before connecting the appliance check that the voltage selector A setting corresponds to the local mains voltage.
Basic safety precautions should always be followed when using electrical appliances.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Children should be supervised to ensure that they do not play with the appliance.
Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
When the hairdryer is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the hairdryer is switched off.

1. Even when the hair dryer is switched off, the power is still on. Always pull out the mains plug when not in use

2. Do not use this product near or over water contained in baths, washbasins, sinks, etc. If, for some reason, the product has fallen into water: first unplug immediately. Then, dispose of the product. It must not be used again.

3. Do not plug in or unplug the appliance with wet hands.

4. Do not place or store the unit where it can fall or be pulled into a tub or sink.

5. Do not immerse it in water, even for cleaning.

6. For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.
   DANGER: To reduce the risk of burns, fire, electric shock, or personal injury

7. Never obstruct the air grills.

8. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

9. If the supply cord is damaged, it must be replaced by the manufacturer, itsservice agent or similarly qualified persons in order to avoid a hazard.

10. This product is equipped with an automatic overheating protection device. If the appliance overheats, it will switch off. Unplug the appliance. After cooling down for a few minutes, the appliance can be used again. Before reusing, check the inlet and outlet grilles for possible blockage by fluff, hair, etc. If in doubt, consult your dealer or a PARWIN PRO BEAUTY Service Centre.

11. If the mains cord of this appliance is damaged, it must only be replaced by PARWIN PRO BEAUTY or their service representative, as special tools and/or parts are required.

12. For examination or repairs always return the appliance to an authorized FMK Service Centre. Unqualified repair work can lead to extreme hazards for the user.
    WARNUNG Keep away from water! Unplug immediately if it has fallen into the water.

13. It is recommended that children are supervised to ensure that they do not play with the device.

14. This appliance is not designed for use by persons(include children) with reduced physical, mental or sensory abilities, or people who have no prior experience or knowledge of this appliance.

ABOUT YOUR PRODUCT

Switch/Button Function
Switch: Switch off/on the appliance.
Speed Setting: Press this button to set the desired air speed.
Heat Setting: Press this button to set the desired temperature setting.
Hyper-Speed BLDC Motor
High-speed motor with long life feature.
The Hyper-Airflow-Styler is equipped with an advanced, unique self-developed BLDC Brushless Motor, more than 100,000 rpm. The impeller is shaped like an aircraft turbine, which makes the wind speed at the air outlet more than 17 m/s. The ultra-high-speed airflow can dry the hair more efficiently. In other words, the short styling time reduces the damage to the hair. Built-in Ion Emission System.
Equipped with a super anion emitter, millions of negative ions are released under the strong airflow, which not only can remove the hair static, smooth the hair, tighten the hair cuticles, leave the hair coruscating shine, but also can dry hair quickly and gently, but improve the health of hair.
Built-in Ion Emission System.
Equipped with a super anion emitter, millions of negative ions are released under the strong airflow, which not only can remove the hair static, smooth the hair, tighten the hair cuticles, leave the hair coruscating shine, but also can dry hair quickly and gently, but improve the health of hair.

CERAMIC COATING

Ceramic coating helps to reduce damage from excessive styling, and even heat distribution helps to style hair quickly.
Heat and Airflow-speed Settings
Equipped with 2 heat settings, 1 cool airflow setting, and 3 airflow speed settings. The 3 heat and 3 airflow settings can be manually increased or decreased depending on your preferences. Meet all scenarios of your blow- drying or hair styling needs.
When the heat setting button is pressed, the higher the heat power, the more LEDs will light up; when no light is on, it means cold air is blowing.
The LED lights do not change when the airflow speed setting is changed. Convenient Buttons & Switch with memory function.
Fashionable and elegant buttons: 3 wind speeds, 3 heating levels with LED light indicator. The independent opening button has the memory function.
When you open it again, it will keep the previous setting. There is no memory function when the setting is set to cool airflow before turning off.
Innovative Micro Filter
Prevents even the smallest dust particles from entering the motor, improves hair cleaning, and extends motor life.
The detachable air inlet design allows you to clean and maintain the unit manually. See “CLEANING INSTRUCTIONS” for detailed operating instructions.
Fast Drying, Low Noise
Brushless motors have no carbon brushes, Excellent reduction of ineffective friction inside reduces wear and tear, are safer to use, and extend the service life. Produce a stable airflow for the fastest drying. Rotation is smoother, Greatly reduces noise, and is less than 80db, which brings you a pleasant styling experience.

AIRFLOW CONCENTRATOR

In the “host handle”, the air enters from the bottom, is concentrated to form a hyper-speed airflow, and the airflow is delivered to the top of the “host handle”.
The airflow with negative ions through the structure of the various accessories, work on the hair to achieve 4 different hairdressing effect.

USING THE ATTACHMENTS

• The Hairdryer Attachment helps to dry the water in the hair (to achieve a slightly hydrated state) and helps you prepare for the next styling process.
  The airflow with negative ions can better protect the hair from damage while drying.

• With the Massage Straightening Brush Attachment, you can dry and straighten hair at the same time.
  Thanks to the anti-frizz effect, the airflow with negative ions counteracts static electricity and provides additional smoothing. Comb the straightening brush slowly through the hair, from the scalp to the ends, and repeat this process until the hair is dry and smooth.

• The Hot Air Brush Attachment adds volume to the hairline and creates lightly curled ends. Comb from the inside of the hair and turn the comb outward to create a slightly inward curled style; from the outside of the hair and turn the comb inward to create an outward curled style.
  By repeatedly rotating the oval brush at the ends of the hair, you can create a curlier hairstyle.

• The Airflow Curler Attachment has a unique airflow outlet structure that automatically absorbs hair and wraps it around the curling attachment. It is more convenient to use.
  The high-speed thermal airflow with negative ions acts on the hair to create voluminous curls and waves faster.

AUTO Adsorption Airflow Curler

1. Hold a small section of hair close to the curler.
2. Airflow absorbs the hair, the hair will be absorbed automatically, and wrap around the curler.
3. Hold for 3-5s to finish creating volumizing natural curls.

IMPORTANT
Using PARWIN PRO BEAUTY’s original accessories only

REPLACING STYLING ATTACHMENTS

1. To replace an attachment, first, switch off the device, disconnect the power plug and allow it to cool down normally.
2. Press and hold the release button while pulling the attachment out of the host handle.
3. Align the “▼” symbol of the attachment with the “▲” on the handle and then slide it along the guide groove until you hear a “click”.

CLEANING INSTRUCTIONS

The air inlet of the appliance is designed to be detachable, turn the bottom mesh cover counterclockwise to remove it. Dust and lint can be removed with the small cleaning brush provided. Regular cleaning can maintain the performance of the unit. Please make sure that NO moisture or additional dirt enters the unit during cleaning.

CLEANING THE ATTACHMENTS

1. To clean the attachment, follow steps one and two in the section “REPLACING STYLING ATTACHMENTS” above.
2. Wash the attachments with warm soapy water, rinse them with cold water, and then let them air dry. Make sure the accessories are completely dry before placing them on the base.

MAINTENANCE INSTRUCTIONS FOR THE USER

This unit is equipped with a thermostat that automatically turns off when the temperature of the unit exceeds the maximum value because the air inlet or outlet vents are partially blocked.
If the unit slows down during use, turn off the switch and let the unit cool down, then the thermostat will automatically reset.
If the unit is used near water (e.g. in bathrooms), the use of a circuit protected by a residual current device is recommended.

MAINTENANCE

Your unit is virtually maintenance-free. It does not require lubrication. Keep all vents and openings clean and free of dust, dirt and hair spray. When cleaning is required, disconnect the unit from the power source and wipe the exterior with a damp cloth. If the cord becomes twisted, untangle it before use. Warning: If a malfunction occurs, do not attempt to repair the unit. This unit has no parts that can be repaired by the user.

STORAGE

1. Unplug the power cord when not in use. Disconnect the unit from the power supply and allow it to cool before storing.
2. DO NOT apply pressure or tension to the point where the cable connects to the unit. Avoid jerking, twisting or pulling, especially on the connectors.
3. never wrap the cable around the device, otherwise it will be prematurely damaged and break; keep it loose and not bent or folded during storage.
4. store the device in a safe, dry place out of the reach of children.

GUARANTEE

This product comes with a 30-day return policy and a 12-month limited warranty that covers manufacturing defects in materials and workmanship.
For further warranty services and guidelines, please contact the brand customer service staff of the purchase platform, or contact us via our official e-mail: [email protected]
Please follow our official FaceBook account @HaircaresshopBeauty for more information.
Keep Original Sales Receipt As Proof Of Purchase For Warranty Purposes.
This warranty does not cover products damaged by the following :

• Misuse, negligence, failure to comply with the operating instructions, use of the product outside of the current or voltage specified in the operating instructions, unauthorized modification or repair of the product.
• Excludes normal wear and tear, scratches and wear and tear from normal use.
• Use with unauthorized accessories.
• Consumables cause damage to the machine.
• Entry of water, dust or insects.
• Damage or impairment caused by voltage or performance errors.
• Hair dyes leave traces on the product
• Wrapping the cord around the appliance, causing premature wear breakage.
• Any other conditions beyond our control, no responsibility, obligation, or liability is assumed for the installation or maintenance of this product.

OFFICIAL REGISTER AND NEWS INFORMATION

1. To get the latest Amazon coupon for your discount, contact us by Email and submit the sole coupon code. Follow us to get the newest product information.
2. Thank you for shopping with PARWIN PRO BEAUTY If you have any questions or suggestions. And send your requests by e-mail to [email protected]
3. You can register on our PARWIN PRO BEAUTY official website www.haircaresshop.com with your personal information and productive code to get our newest product information and our product guarantee.

PARTICIPATE IN PROTECTING THE ENVIRONMENT
**** Your device contains many usable or recyclable materials.
Take it to a collection point for processing.

www.haircaresshop.com
[email protected]
www.facebook.com/haircaresshopbeauty
MADE IN CHINA

Documents / Resources

| PARWIN PRO BEAUTY UK-PW-AB0326-4P High Speed BLDC- Motor [pdf] Instruction Manual
UK-PW-AB0326-4P High Speed BLDC-Motor, UK-PW-AB0326-4P, High Speed BLDC-Motor, BLDC-Motor
---|---

References

• Hairstyle Tools--Curling Iron, Flat Iron, Hot Air Brush, Hair Dryer... – Haircaresshop

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>