PARWIN PRO BEAUTY AB0319-4P 4 in 1 Hair Dryer Brush Set User Manual
- June 14, 2024
- PARWIN PRO BEAUTY
Table of Contents
- PARWIN PRO BEAUTY AB0319-4P 4 in 1 Hair Dryer Brush Set
- Product Information
- Product Usage Instructions
- Instruction for use
- ION TECHNOLOGY
- STYLING TIPS
- AIRFLOW CONCENTRATOR
- USING THE ATTACHMENTS
- CHANGING THE ATTACHMENT
- CLEANING INSTRUCTIONS
- MAINTENANCE INSTRUCTIONS FOR THE USER
- IMPORTANT SAFETY INSTRUCTIONS
- OPERATING INSTRUCTIONS
- TROUBLESHOOTING
- GARANTIE
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PARWIN PRO BEAUTY AB0319-4P 4 in 1 Hair Dryer Brush Set
Product Information
Specifications:
- Product Name: 4 IN 1 Hair Dryer Brush Set
- Function: Blow-drying, straightening, creating volume, and styling
- Voltage: 220-240V (suitable for UK voltage)
- Attachments: Hair Dryer Attachment, Straightening Brush Attachment, Oval Brush Attachment, Diffuser Attachment
Ion Technology:
A built-in generator releases negative ions that help maintain the neutral
charge on the hair surface. This technology reduces frizz and static
electricity, resulting in healthier and shinier hair.
Ceramic Coating:
The ceramic coating on the attachments helps reduce hair damage from excessive
styling. It also ensures even distribution of heat for quick and efficient
styling.
Product Usage Instructions
Styling Tips:
- Towel-dry your hair and straighten it with a comb or brush before using the product to avoid tangling.
- For faster styling, ensure that your hair is not too wet.
- Plug the device into an electrical outlet.
- Slide the switch to the HIGH level for medium to thick hair, or the LOW level for fine hair.
- Once you have achieved your desired hairstyle, use the COOL level to set the style and make it last longer.
- Always install one of the attachments before using the device.
Airflow Concentrator:
The Host Handle allows air to enter from the bottom, which is then
concentrated to form an airflow and delivered to the top. The airflow, along
with negative ions, passes through different attachments to achieve four
different hairdressing effects.
Using the Attachments:
- Hair Dryer Attachment: Use this attachment to blow-dry the hair and prepare it for further hairdressing. Ensure that the hair is slightly moisturized before using this attachment. The negative ions in the airflow help protect the hair from damage while drying.
- Straightening Brush Attachment: This attachment allows you to blow-dry and straighten your hair simultaneously. The negative ions in the airflow counteract static charging, reducing frizz and providing extra smoothness. Slowly comb the straightening brush through the hair from the scalp to the ends until the hair is dry and smooth.
- Oval Brush Attachment: Use this attachment to add volume to the hairline and create slightly curled ends. Comb down from the inside of the hair while turning the comb outwards for inward curls. Comb down from the outside of the hair while turning the comb inwards for outward curls. Rotate the oval brush repeatedly at the ends of the hair to create more pronounced curls.
- Diffuser Attachment: This attachment is used to create more volume in the hair. It disperses the airflow of a blow dryer over a larger area. Blow air on all parts of the hair, including the roots, hairline, and tail, to increase volume. It is particularly useful for styling curly hair without disturbing its natural shape.
FAQ (Frequently Asked Questions)
-
Q: Can I use this product with a different voltage?
A: No, this product is suitable for UK voltage (220-240V) only. Using a different voltage may result in poor performance and damage to the appliance. -
Q: How does the ion technology benefit my hair?
A: The built-in ion generator releases negative ions that help maintain a neutral charge on the hair surface. This reduces frizz and static electricity, resulting in healthier and shinier hair. -
Q: Can I use the attachments on wet hair?
A: It is recommended to towel-dry your hair and straighten it with a comb or brush before using the attachments. Styling is faster if the hair is not too wet. -
Q: How do I choose the appropriate heat level?
A: Slide the switch to the HIGH level for medium to thick hair, and the LOW level for fine hair. Adjust the heat level based on your hair type and desired styling results. -
Q: Do I need to use the COOL level after styling?
A: Yes, using the COOL level after styling helps set the hairstyle and make it last longer.
Instruction for use
Please follow the instructions on the manual to use the product, Failure to comply with the manual will result in poorer performance of your appliance. This appliance is a multifunctional hairdressing tool with replaceable attachments. The set can be used for blow-drying, straightening, creating volume, and styling. This appliance is suitable for UK voltage (220-240V), please do not use current or voltage other than as stamped on the product.
ION TECHNOLOGY
A built-in generator releases negative ions that help maintain the neutral charge on the hair surface. Hair looks well-groomed and supple, while frizz and static electricity are reduced – for healthy, shiny hair.
CERAMIC COATING
The ceramic coating helps reduce the damage to hair from excessive styling,
and the even distribution of heat helps style hair quickly.
STYLING TIPS
- Before using, towel-dry your hair and straighten it with a comb or brush to avoid tangling. Styling is faster if the hair is not too wet. Plug the device into an electrical outlet and slide the switch to the HIGH level to style medium to thick hair. The LOW level is recommended for fine hair.
- When you have achieved the hairstyle you want, use the COOL level to style your hair and make the hairstyle last for a long time.
- Be sure to install one of the attachments when using the device.
AIRFLOW CONCENTRATOR
- In the “Host Handle”, the air enters from the bottom, is concentrated to form an airflow, and the airflow is delivered to the top of the “Host Handle”.
- The airflow with negative ions through the structure of different accessories, work on the hair, to achieve 4 different hairdressing effect.
USING THE ATTACHMENTS
- The Hair Dryer Attachment to blow dry the water from the hair (turn to the slightly moisturized status), and help you prepare for the hairdressing process.
- The airflow with negative ions can better protect the hair from damage while drying the hair.
- The Straightening Brush Attachment to blow-dry and straighten the hair at the same time.
- The airflow with negative ions counteracts static charging through the anti-frizz effect and provides extra smoothness.
- Slowly comb the straightening brush through the hair from the scalp to the ends of the hair, repeat this action until the hair is dry and smooth.
- The Oval Brush Attachment gives volume to the hairline and conjures up slightly curled ends of the hair.
- Comb down from the inside of the hair while turning the comb outwards, to create a slightly curly hairstyle inward.
- Comb down from the outside of the hair while turning the comb inwards, to create a slightly curly hairstyle outward.
- Rotating the oval brush repeatedly at the ends of the hair can create a more curly hair end.
- The Diffuser Attachment creates more volume in the hair. Use a diffuser to disperse the airflow of a blow dryer and spread it over a larger area. Blow air on all parts of the hair (hair roots, hairline, tail) to increase the volume of each part of the hair. Mainly used to style curly hair as it lets you dry your curly quickly without disturbing its natural shape.
CHANGING THE ATTACHMENT
- To change a brush attachment, turn off the styler, unplug it, and allow it to cool normally.
- Press the release button and pull the accessory out of the “Host Handle”.
- Align the accessory to be inserted with the “▲” symbol on the handle and slide it along the guide slot until you hear a “click”.
CLEANING INSTRUCTIONS
The air inlet of the appliance is a detachable design. Dust and lint can be cleaned out with the attached small cleaning brush. Regular cleaning can maintain the high performance of the appliance. Please ensure that NO moisture or additional dirt gets into the device during cleaning.
CLEANING THE ATTACHMENTS
- To clean the attachment, follow steps one and two in the “Replacing the Brush Attachment” section above.
- Wash the attachments with warm soapy water, rinse with cold water, and then air dry. Before placing the attachment on the base, make sure that the attachment is completely dry.
MAINTENANCE INSTRUCTIONS FOR THE USER
This appliance is equipped with a thermostat that switches off automatically if the temperature of the appliance exceeds the maximum value because the air inlet or outlet is partially blocked.
Should the device slow down during use, turn off the switch and let the device cool down, then the thermostat will automatically reset. If the device is used near water (e.g. in bathrooms), the use of a circuit protected by an earth leakage circuit breaker is recommended.
MAINTENANCE
Your device is practically maintenance-free. It doesn’t need lubrication. Keep
all vents and openings clean and free of dust, dirt, and hairspray. If
cleaning is required, unplug the device and wipe the outside with a damp
cloth. If the cord is twisted, untangle it before use. Warning: If a
malfunction occurs, do not attempt to repair the device. This device has no
user-serviceable parts.
STORAGE
- Unplug the power cord when you are not using the appliance, it should be disconnected from the power supply and allowed to cool before storage.
- DO NOT apply pressure or tension to the point where the cable connects with the appliance. Avoid jerky movements, twisting, or pulling, especially at the plug connections.
- Never wrap the cable around the device, otherwise, it will be damaged prematurely and break, it should be left loose and not kinked or folded During storage.
- The device should be kept in a safe, dry place out of the reach of children.
IMPORTANT SAFETY INSTRUCTIONS
NEVER wrap the power cord around the device. Any pulling, twisting, excessive
kinking or bending can damage the cable, especially at the connection point,
which can tear the cable and cause a short circuit or other malfunction.
Check the cable regularly. DO NOT use any device with a twisted, kinked, or
otherwise damaged cord, or if the device is receiving irregular power. If the
cord is damaged or the power supply is irregular, see the instructions in the
WARNING section below.
OPERATING INSTRUCTIONS
Basic safety precautions should always be followed when using electrical appliances, especially when children are present.
DANGER:
As with most electrical appliances, electrical components are live even when
the switch is off. To reduce the risk of electrocution:
- Always pull the plug out of the socket immediately after use.
- DO NOT use it while bathing.
- Do not place or store appliances where they can fall or be pulled into the bathtub or sink.
- Do not submerge it or run it under water, even to clean it.
- If the appliance falls into water, pull out the power plug immediately. DO NOT reach into the water
- Do not use the appliance with twisted, kinked, or otherwise damaged power cords.
- Do not use this device near a bathtub, shower, washbasin, or other containers that contain water(liquid).
WARNING:
To reduce the risk of burns, fire, electric shock, or personal injury.
-
Once the appliance is plugged in, it should never be left unattended. Turn off the switch and unplug the device when you are not using the device.
-
If this appliance is used or in the vicinity of children or disabled persons, close supervision is required.
-
Use the device only for the purpose described in these instructions. DO NOT use accessories that are not recommended by the manufacturer.
-
Do not operate the device if the cord or plug is damaged, if it is not working properly, if it has been damaged or if it has been dropped into water. Take the device to a service center for inspection and repair.
NOTE: PARWIN PRO BEAUTY does not have an authorized service center. However, if the device is still within the warranty period, please send it to PARWIN PRO BEAUTY customer service for classification. -
Keep the cord and device away from hot surfaces.
-
Do not pull, twist, or wrap the cord around the device.
-
Never switch on the device while you are sleeping.
-
Do not drop or insert objects into openings
-
Do not use the device outdoors or on hair that has been exposed to flammable aerosol products (spray).
-
Do not block the ventilation openings on the device or place it on a soft surface, such as a desk. B. a bed or sofa, otherwise the ventilation openings may be blocked. Keep the ventilation openings free of lint, hair, etc.
-
Do not blow hot air directly into your eyes or other heat-sensitive areas.
-
Accessories (if fitted) may get hot during use. Please remove the accessories after they cool down.
-
Do not accidentally place the device on the skin surface while it is in use.
-
Keep your hair away from air inlets when using the appliance.
-
Do not operate this device with a voltage converter.
-
Do not use an extension cord with this device.
TROUBLESHOOTING
-
Can’t blow out hot air:
Usually, it is caused by the dust blockage of the air inlet, please use the cleaning brush to clean it regularly. -
Overheated during use:
Please try to use another setting, like”COOL”, or “LOW”, you also can use a glove. -
Does not work:
Please re-start the appliance, turn to the “OFF” setting, then turn to another setting. If still doesn’t work, please contact us via email for more help.
GARANTIE
This product comes with a 30-day return policy and a 12-month limited warranty that covers manufacturing defects in materials and workmanship. For further warranty services and guidelines, please contact the brand customer service staff of the purchase platform, or contact us via our official E-mail: service@haircaresshop.com.
Please follow our official
Facebook account @HaircaresshopBeauty for more information.
- This warranty does not cover misuse, negligence, failure to comply with the operating instructions, use of the product outside of the current or voltage specified in the operating instructions, or unauthorized modification or repair of the product.
- Excludes normal wear and tear, scratches, and wear and tear from normal use.
- Consumables cause damage to the machine.
- Entry of water, dust, or insects.
- Damage or impairment caused by voltage or performance errors.
- Hair dyes leave traces on the product.
MAKE A CONTRIBUTION TO PROTECTING THE ENVIRONMENT
Your device contains many usable or recyclable materials Take it to a
collection point for processing
Made in China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>