mikroTik CCR2216-1G-12XS-2XQ Routers and Wireless User Guide

: June 1, 2024
: Mikrotik

Table of Contents

mikroTik CCR2216-1G-12XS-2XQ Routers and Wireless
Product Information
Product Usage Instructions
INSTRUCTION
First steps
Safety Information
Federal Communication Commission Interference Statement
Technical Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

mikroTik CCR2216-1G-12XS-2XQ Routers and Wireless

mikroTik-CCR2216-1G-12XS-2XQ-Routers-and-Wireless-
PRODUCT

Product Information

Specifications

Model: CCR2216-1G-12XS-2XQ
Manufacturer: Mikrotikls SIA
Address: Unijas iela 2, Riga, Latvia, LV1039

Product Usage Instructions

First Steps

Connect the device to the power source.
Use a Web browser or WinBox to connect to the default IP address of 192.168.88.1 from the first port with the username ‘admin’ and no password.
If IP is not available, download WinBox from the MikroTik webpage and use it to connect through the MAC address.
Update RouterOS software to the latest version and ensure the device has an internet connection.
If the device does not have an internet connection, update the software by downloading the latest version from the MikroTik webpage.
Find the latest software and choose your packages.
To get the architecture type of your device model, open WinBox, WebFig, go to (System/Resources).
Download packages to the PC and upload them to WinBox, WebFig, (Files) menu, and reboot the device.
Set up your password to secure the device.

Safety Information

Be aware of the hazards involved with electrical circuitry before working on any MikroTik equipment.
Use only approved power supply and accessories found in the original packaging.
Installation should be done by trained personnel following local and national electrical codes.
Avoid disassembling, repairing, or modifying the device.
Install indoors and keep away from water, fire, humidity, or hot environments.
Disconnect from power in case of device failure by unplugging the power adapter from the outlet.
Properly disposes of the device to designated collection points to avoid environmental contamination.
Product is Class A; may cause radio interference in a domestic environment.

Frequently Asked Questions (FAQ)

Is it necessary to update RouterOS to a specific version?
It is recommended to upgrade to RouterOS v7.7 or the latest version for compliance with local authority regulations and optimal performance.
Can I use any power supply with this device?
No, use only the power supply and accessories approved by the manufacturer as specified in the original packaging.
What should I do if the device fails?
In case of device failure, disconnect it from power immediately by unplugging the power adapter from the outlet.

This device needs to be upgraded to RouterOS v7.7 or the latest version to ensure compliance with local authority regulations!
It is the end user’s responsibility to follow local country regulations. All MikroTik devices must be professionally installed.
This Quick Guide covers the model: CCR2216-1G-12XS-2XQ.

INSTRUCTION

This is a network device. You can find the product model name on the case label (ID).
Please visit the user manual page on https://mt.lv/um for the full up-to-date user manual. Or scan the QR code with your mobile phone.
The most important technical specifications for this product can be found on the last page of this Quick Guide.
Technical specifications, Full EU Declaration of Conformity, brochures, and more info about products at https://mikrotik.com/products
Configuration manual for software in your language with additional information can be found at https://mt.lv/help
MikroTik devices are for professional use. If you do not have qualifications please seek a consultant https://mikrotik.com/consultants

First steps

Connect the device to the power source;
Use a Web browser or WinBox to connect to the default IP address of 192.168.88.1 from the first port, with the username admin and no password (or, for some models, check user and wireless passwords on the sticker);
If IP is not available, download WinBox from our webpage and use it to connect through the MAC address;
Update RouterOS software to the latest version, and make sure that the device has an internet connection;
If the device does not have an internet connection update software by downloading the latest version from our webpage https://mikrotik.com/download;
Find the latest software and choose your packages;
To get the architecture type of your device model, open WinBox, WebFig go to (System/Resources);
Download packages to the PC and upload them to the WinBox, WebFig, (Files) menu, and reboot the device;
Set up your password to secure the device.

Safety Information

Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents. The installer should be familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, which can be found in the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device.
Please use this product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power outlet.
Adapter shall be installed near the equipment and shall be easily accessible.
To avoid contamination of the environment, separate the device from household waste and dispose of it in a safe manner, for example, in designated areas. Become familiar with procedures for properly transporting the equipment to designated collection points in your area.
This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate measures
Electric shock hazard. This equipment is to be serviced by trained personnel only
Manufacturer: Mikrotikls SIA, Unijas iela 2, Riga, Latvia, LV1039.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense
FCC Caution : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note : This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance.

Innovation, Science and Economic Development Canada
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This Class A digital apparatus complies with Canadian ICES-003.
CAN ICES-003 (A) / NMB-003 (A)