TAC BA402299BP Side Steps Running Boards Instruction Manual
- June 1, 2024
- TAC
Table of Contents
TAC BA402299BP Side Steps Running Boards
Product Specifications:
- Product Name: 5IN Oval Bent End Sidebar
- Compatibility: 2019-2023 1500 Silverado/Sierra Crew Cab,2020-2024 2500/3500 Silverado/Sierra Crew Cab (Includes diesel models w/DEF)
- Part Number: BA402299BP
- Website: www.tacautoparts.com
Product Usage Instructions
Parts List:
- 1 Driver/left Sidebar
- 1 Passenger/right Sidebar
- 8 Mounting Brackets
- 16 8-1.25mm x 30mm Hex Bolts
- 16 8-1.25mm x 25mm Combo Bolts
- 16 8mm Lock Washers
- 16 8mm x 24mm x 2mm Flat Washers
Installation Procedure:
- Remove contents from the box and verify all parts are present.
- Select a Mounting Bracket and bolt it to the factory threaded holes on the driver/left side using the provided hardware without tightening at this point.
- Install remaining Mounting Brackets along the driver/left side body panel.
- Attach the Driver/left Sidebar to the Brackets using the Combo Bolts.
- Level and adjust the Sidebar, then tighten all hardware.
- Repeat the above steps to install the Passenger/right Sidebar.
- Periodically inspect the installation to ensure all hardware is secure and tight.
Maintenance Tips:
To protect your investment, wax the product after installing.
Regular waxing is recommended to add a protective layer over the finish. Avoid
using polishes or waxes containing abrasives that could damage the finish. Use
aluminum polish for small scratches and scuffs, and mild soap for cleaning.
Frequently Asked Questions (FAQ):
Q: Can these Sidebars be installed on vehicles other than the specified
models?
A: It is recommended to only install the Sidebars on compatible vehicle
models as listed in the specifications for proper fit and functionality.
Q: Is professional assistance necessary for installation?
A: While not mandatory, professional assistance is recommended to ensure
correct installation and avoid any damage to the vehicle or product.
INSTALLATION INSTRUCTIONS
5IN OVAL BENT END SIDEBAR
2019-2023 1500 SILVERADO/SIERRA CREW CAB
(INCLUDES DIESEL MODELS W/DEF)
2020-2024 2500/3500 SILVERADO/SIERRA CREW CAB
(INCLUDES DIESEL MODELS W/DEF)
PART# BA402299BP
5IN OVAL BENT END SIDEBAR
2019-2023 1500 SILVERADO/SIERRA CREW CAB (INCLUDES DIESEL MODELS W/DEF)
2020-2024 2500/3500 SILVERADO/SIERRA CREW CAB (INCLUDES DIESEL MODELS W/DEF)
PARTS LIST
| 1 | Driver/left Sidebar | 16 | 8-1.25mm x 30mm Hex Bolts |
|---|---|---|---|
| 1 | Passenger/right Sidebar | 16 | 8-1.25mm x 25mm Combo Bolts |
| 8 | Mounting Brackets | 16 | 8mm Lock Washers |
| 16 | 8mm x 24mm x 2mm Flat Washers |
INSTRUCTION
PROCEDURE:
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION. ASSISTANCE IS RECOMMENDED.
- Start the installation under the driver side of the vehicle. Locate the 6 plugs along the bottom edge of the body. Mounting Brackets will bolt to the 1st, 3rd, 4th and 6th threaded mounting holes, (Figures 1—5). Remove the plastic plugs from each mounting location. Directly above each threaded insert is a top mounting location on the side of the body panel. Hold a Bracket up in place to help determine the mounting holes to use along the body. NOTE: Thread an 8mm Hex Bolt into the threaded inserts to clear paint as required.
- Select (1) Mounting Bracket. Starting at the front of the driver/left side, bolt the Mounting Bracket to the factory threaded holes with (2) 8mm Hex Bolts, (2) 8mm Lock Washers and (2) 8mm Flat Washers,(Figures 6 & 7). Do not tighten hardware at this time.
- Repeat Steps 1 & 2 to install (3) Mounting Brackets on the remaining driver/left side mounting locations along the body panel, (Figures 8—10).
- Select the Driver/left Sidebar. Use the illustration above to help determine the correct Sidebar. Place the Sidebar on top of the Brackets. IMPORTANT: Do not slide, (front to back or rotate), the Sidebar on the Brackets or damage to the finish may result.
- Attach the Sidebar to the Brackets with (8) 8mm Combo Bolts, (Figures 11—15).
- Level and adjust the Sidebar and fully tighten all hardware.
- Repeat Steps 1—6 to install the Passenger/right Sidebar.
- Do periodic inspections to the installation to make sure that all hardware is secure and tight.
To protect your investment, wax this product after installing. Regular
waxing is recommended to add a protective layer over the finish. Do not use
any type of polish or wax that may contain abrasives that could damage the
finish.
Aluminum polish may be used to polish small scratches and scuffs on the
finish. Mild soap may be used also to clean the Sidebars.
Driver/left side Installation Pictured
Driver/left side Installation Pictured
Driver/left side Installation Pictured
