Chuangyiyuan W25 Wireless Speaker User Manual

Chuangyiyuan W25 Wireless Speaker

Product Specifications

• Compliance: FCC Part 15
• RF Exposure: General RF exposure requirement met
• Portable Use: Can be used in portable exposure condition without restriction

Product Usage Instructions

FCC Statement
This device complies with part 15 of the FCC Rules. To ensure proper operation, please adhere to the following conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. It can be used in portable exposure conditions without any restrictions.

Frequently Asked Questions (FAQ)

1. Q: Is the device compliant with FCC regulations?
   A: Yes, this device complies with FCC Part 15 regulations.

2. Q: Can the device be used in portable conditions?
   A: Yes, the device can be used in portable exposure conditions without any restrictions.

Basic Specification

• BT version:JL5.3
• Material:ABS
• Output power (RMS):5W
• Battery capacity:400mAh
• Charging time:1-2 H
• Working hour:3-4 H
• Speaker driver size:52mm
•  Product Size: 9941 95mm

Product Feature

• Bluetooth music playback
• Hands Free call
• RGB light.

Instruction of Buttons

1. Power on/off.
2. Short press previous song,Long press decrease the volume.
3. Short press next song,Long press increase the volume.
4. Play, pause.
5. Answer the phone/Hang up the phone.
6. TYPE-C charging port.

Operation Instruction

1. Bluetooth connection: Turn on the W27 Bluetooth speaker and switch to Bluetooth mode, search for the Bluetooth name “W27” with your mobile phone or other devices and connect, and the connection will be successful. when you hear the prompt tone.
2. RGB light switching:When W25 is on, Short press  to change the RGB mode,there are 2 light modes.
3. Hands Free call:Short press to answer the phone or hang up,long press to refuse the answer.
4. Charging tip: Insert the USB cable into the TYPE-C charging port, the red light is on to indicate charging, and the red light is off to indicate that the charging is complete.

Common problems and solving methods

1. After playing for a long time,the device will often tum off in auto. The battery is insufficient, please charge it to full power and them turn on.
2. The device does not work very well whether beyond the effective distance of Bluetooth connection,or some barriers on there.
3. Can not connect the Bluetooth Is the Bluetooth in search-able mode or not,or reboot the speaker. There are too many Bluetooth devices around you, try to turn off them.

Attention

1. Use this product under normal temperature environment.
2. Do not play in the wet environment.
3. Avoid the damage of falling.
4. Do not dismantle or repair the speaker by yourself.
5. Built-in battery,do not throw the speakers in the fire.

FCC Statement

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>