SIEMENS HZ39050 Wireless Cooking Sensor Instruction Manual
- June 1, 2024
- SIEMENS
Table of Contents
SIEMENS HZ39050 Wireless Cooking Sensor
Product Specifications
- Model: HZ39050
- Type: Wireless cooking sensor
- Brand: Siemens Home Appliances
Safety Instructions
- Do not let children play with the appliance. Ensure supervision for children aged 8 or over and individuals with reduced abilities.
- Avoid exposure to high temperatures to prevent damage to the sensor battery.
- Keep the wireless temperature sensor away from heat sources and wear oven gloves when handling hot components.
- Magnetic control elements can be damaging to electronic implants; maintain a safe distance of at least 10cm.
Safety
Observe the following safety instructions.
General information
- Read this instruction manual carefully.
- Keep the instructions, the appliance and the product information safe for future reference or for the next owner.
- Do not connect the appliance if it has been damaged in transit.
Intended use
Only use this appliance
- To prepare meals and drinks.
- Under supervision. Never leave the appliance unattended when cooking for short periods.
- In private households and in enclosed spaces in a domestic environment.
Restriction of the user group
Do not let children play with the appliance.
This appliance may be used by children aged 8 or over and by people who have
reduced physical, sensory or mental abilities or inadequate experience and/or
knowledge, provided that they are supervised or have been instructed on how to
use the appliance safely and have understood the resulting dangers.
Safe use
WARNING ‒ Risk of injury!
The wireless temperature sensor is equipped with a battery, which may become
damaged if it is exposed to high temperatures.
-
Remove the sensor from the cookware and store it away from any heat sources.
The temperature sensor may be very hot when removing it from the saucepan. -
Wear oven gloves or use a tea towel to remove it.
WARNING ‒ Danger: Magnetism!
The wireless temperature sensor is magnetic and can damage electronic
implants, e.g. heart pacemakers or insulin pumps.
- Persons with electronic implants must stand at least 10 cm away from the magnetic control element.
- Never put the control element in your pockets.
WARNING ‒ Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in
it and suffocate.
-
Keep packaging material away from children.
-
Do not let children play with packaging material.
Children may breathe in or swallow small parts, causing them to suffocate. -
Keep small parts away from children.
-
Do not let children play with small parts.
Environmental protection and saving energy
Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.
- Sort the individual components by type and dispose of them separately.
Before the first use3 Before the first use
Before the first useIn order to be able to use the cooking functions, you must
pair the wireless cooking sensor to the control panel. You can find further
information in the section on cooking functions in the user manual for your
hob.
Scope of delivery
- After unpacking all of the parts, check for any transport damage and for completeness of delivery.
- Wireless cooking sensor
- Silicone patch
- Template
→ Fig. 1→ Fig. 2
Attaching the silicone patch
The silicone patch secures the cooking sensor to the cookware.
For fitting on the cookware:
-
The adhesive area on the cookware must be free from grease.
Clean and dry the container thoroughly, and rub the adhesive area using alcohol, for example. -
Remove the protective film from the silicone patch. Adhere the silicone patch to the outside of the cookware in the correct place using the enclosed template as a guide.
→ Fig. 2 -
Press down all over the surface of the silicone patch, including in the centre.
-
Leave the adhesive to dry for one hour. Do not use or rinse out the cookware during this time.
Note: If the silicone patch comes loose, use a new one. If required, you can
purchase a set with five silicone patches from specialist retailers, from our
customer service or on our offi-cial website siemens-home.bsh-group.com by quoting article number 17007119.
All adhesives break down over time when they are stored. To prevent this from
happening, place the silicone bases on their containers as soon as they are
cleaned.
Attaching the wireless cooking sensor
- Ensure that the silicone patch is completely dry before attaching the cooking sensor.
- Attach the cooking onto the silicone patch so that it fits perfectly.
Fig. 3
Replacing the battery
If the LED on the wireless cooking
sensor does not light up when pressed, the battery is discharged. Changing the
battery:
-
Remove the silicone cover from the lower section of the cooking sensor casing and remove both screws using a screwdriver. Fig. 4
-
Open the cooking sensor lid and remove the battery from the base. Fig. 5
-
Insert a new battery, observing the instructions for the battery poles. Only use premium-quality CR2032 batteries. Fig. 6
Note: Do not use any metal ob-jects to remove the battery. Do not touch the battery connection points. -
Close the cap on the cooking sensor. The indentations for the screws on the cap must be aligned with the indentations on the lower section of the housing. Use a screwdriver to tighten the screws and secure the silicone cover on the lower section of the cooking sensor housing. Fig. 7
Cleaning
Cooking sensor
Clean with a damp cloth. Do not place in the dishwasher and do not get it wet.
When you are not using the cooking sensor, remove it from the cookware and
store it in a clean, secure location, away from any heat sources.
Silicone patch
Clean and dry before attaching the cooking sensor. The dishwasher was safe.
Note: The cookware with the silicone patch must not be left to soak for long
periods in soapy water.
Window for the wireless cooking sensor
Always keep the window clean and dry. Important:
- Remove dirt and oil splatters regularly.
- For cleaning, use a cloth or a cotton bud and window-cleaning solution. → Fig. 8
Notes
Do not use hard or rough objects such as bristle brushes or scouring pads to
clean the hob, and donot use scouring agents.
Do not touch the window for the wireless cooking sensor with your fingers;
this will soil or scratch it.
Declaration of Conformity
BSH Hausgeräte GmbH hereby declares that the appliance with a wire-less
cooking sensor function meets the basic requirements and other rel-evant
provisions of Directive 2014/53/EU.
A detailed Declaration of Conformity in accordance with Directive RED can be
found at siemens-home.bsh-group.com on
the product page for your appliance under “Additional documents.
The logos and the Bluetooth® brand are registered trademarks and property of
Bluetooth SIG, Inc. These trademarks are used by BSH Haus-geräte GmbH under
licence. All other trademarks and trade names are owned by the respective
companies.
Statement of Compliance for Great Britain
The full Statement of Compliance according to the Product Security and
Telecommunications Infrastructure
(Security Requirements for Relevant Connectable Products) Regulations 2023 can
be found online at www.siemens-home.bsh-group.com/uk/home among the additional documents on the
product page for your appliance.
Product Type
This statement of compliance covers the products described in this information
for use whose model identifier group is seen on the title page. The full model
identifier is made up of the characters before the slash in the product number
(E no.) which can be found on the rating plate. Alternateively, you can also
find the model identifier in the first line of the UK Energy Label.
Name and address of manufacturer BSH Hausgeräte GmbH, Carl-Wery-Strasse 34,
81739 München, Ger-many
This statement of compliance is pre-pared by the manufacturer.
The manufacturer, BSH Hausgeräte GmbH deems that it has complied with
- provision 5.1-1 of ETSI EN 303 645 v2.1.1 and, where relevant, provision 5.1-2 of ETSI EN 303 645 v2.1.1;
- provision 5.2-1 of ETSI EN 303
5 v2.1.1;
- provision 5.3-13 of ETSI EN 303
Sup port period
BSH Hausgeräte GmbH will provide security updates that are necessary to
maintain the main functions free of charge until at least 28/02/2034.
Disposal
Disposing of old appliance
Valuable raw materials can be reused by recycling.
- Dispose of the appliance in an environmentally friendly manner.
Information about current disposal methods are available from your specialist dealer or local authority.
This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
Disposing of batteries
Batteries should be recycled in an environmentally friendly manner. Do not
dispose of the batteries in the household rubbish.
- Dispose of batteries in an environmentally friendly manner.
According to the European Guideline 2006/66/EC, defective or used battery packs/batteries, must be collected separately and disposed of in an environmentally correct manner.
Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG
BSH Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München, GERMANY
siemens-home.bsh-group.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>