PETOMG CM13 Cat Wall Stepper Installation Guide
- June 1, 2024
- PETOMG
Table of Contents
PETOMG CM13 Cat Wall Stepper
Product Information
Specifications
Model | CM13 |
---|---|
Brand | PETOMG® Pet Home Decor |
Components
The Cat Wall Stepper comes with the following parts:
- Part A: Stepper base with pre-drilled holes (Quantity: 1)
- Part B: Stepper platform (Quantity: 1)
- Part C: Stepper support bracket (Quantity: 1)
Hardware for installation:
- For drywall: Drywall anchors (Quantity: 4)
- For solid wall: Solid wall anchors (Quantity: 4)
- Screw type a: Long screws (Quantity: 8)
- Screw type b: Short screws (Quantity: 6)
Product Assembly Information
- Attach the support bracket (Part C) to the stepper base (Part A) using 1 short screw (type b).
- Align the stepper platform (Part B) on top of the stepper base (Part A), ensuring the holes line up.
- Secure the platform (Part B) to the base (Part A) using 2 short screws (type b).
- Mount the assembled stepper to the wall using 3 long screws (type a).
- Ensure the stepper is securely attached to the wall and check for stability before use.
FAQ
- What type of wall can the Cat Wall Stepper be mounted on?
- It can be mounted on both drywall and solid walls, with the appropriate anchors provided.
- How many screws are needed to mount the stepper to the wall?
- Three long screws (type a) are used to mount the stepper to the wall.
- Can I install the Cat Wall Stepper without the support bracket?
- No, the support bracket (Part C) is necessary for the stability and safety of the stepper.
- Is it necessary to use all the screws provided?
- Yes, for the safety and stability of the Cat Wall Stepper, it is important to use all the screws as instructed.
Package Content
Tools
Installation Instructions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>