Thdstatic
FU336T HOUSE BED Box Spring Needed
**Instructions

**

HOUSE BED ASSEMBLY INSTRUCTIONS
SKU : FU336T

HOUSE BED ASSEMBLY INSTRUCTIONS

SKU : FU336T

SAFETY WARNINGS AND GENERAL NOTES

1. Follow the information on the warnings on the bunk bed end structure and on the carton. Do not remove the warning label from the bed.

2. Always use the recommended size mattress on mattress support, or both, to help prevent the likelihood of entrapment or falls.

3. Do not allow children under 6 years of age to use the upper bunk.

4. Periodically check and ensure the guardrail, ladder and other components are in their proper position, free from damage, and all connectors are tight.

5. Do not allow horseplay on or under beds.

6. Always prohibit jumping on the bed.

7. Prohibit more than one person on upper bunk. 8. Always use the ladder for entering and leaving the upper bunk.

8. Do not use substitute parts.Contact the manufacturer or dealer for replacement parts.

9. Use of a night-tight may provide added safely precaution for a child using the upper bunk.

10. Always use guardrails on both long sides of the upper bunk.

11. If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall. The use of water or sleep flotation mattresses is prohibited.

12. STRANGULATION HAZARD- Never attach or hang items to any part of the bunk bed that are not designed for use with the bed; for example, but not limited to, hook, belts and jump ropes.

13. Keep these instructions for future reference.

14. We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet.

15. Be certain all staples are out of the box before beginning assembly on the shipping carton.

16. USE ONLY MATTRESSES WHICH ARE AS THE TABLE BELOW ON LOWER BUNKS
    Down bed
    Bed type
    Length
    Width
    Thickness
    Twin Standard 79″ ­ 80″ 38 ½”
    8” max

17. THE SURFACE OF THE MATTRESS MUST BE AT LEAST 5″ (127MM) BELOW THE UPPER EDGE OF GUARDRAILS.

18. Replacement Parts: Replacement Parts, including additional guardrails, may be obtained from any of our dealers.

PART LIST

HARDWARE LIST

HOUSE BED ASSEMBLY INSTRUCTIONS
SKU : FU336T
DETAIL VIEW

STEP 1: Following the below illustration Assembly Frame #1, Frame #2, Frame #3.Using hardware #B,#G connect #1,#2 with #9 to complete Frame #1. Using hardware #B ,#G, #E connect #3, #4 with #8,#9 to complete Frame #2. Using hardware #E ,#G connect #5,#6 with #7 to complete Frame #3.

NOTE: In this step, DO NOT tighten any bolt until you connect all parts together
STEP 2 : Following illustration Assembly Frame #4. Using hardware #E connect #12,#13 with #19,#20 to complete Frame #4.

NOTE: In this step, DO NOT tighten any bolt until you connect all part together
STEP 3 : Following illustration Assembly Frame #5. Using hardware #E connect #10,#11 with #17,#18 to complete Frame #5.
NOTE: In this step, DO NOT tighten any bolt until you connect all parts together
STEP 4 : Following illustration Assembly Frame #6. Using hardware #D,#F connect #15,#16 with #21, #22 to complete Frame #6.

NOTE: In this step, DO NOT tighten any bolt until you connect all parts together 1/4*30
STEP 5: Following illustration Assembly Frame #7. Using hardware #B, and

E connect Frame #1,Frame #2 with Frame #6, #14 to complete Frame #7. B

NOTE: In this step, DO NOT tighten any bolt until you connect all part together
STEP 6 : Following the below illustration Assembly Frame #8. Using hardware #A,#B,#C,#E connect Frame #5 with Frame #3, Frame #7 to complete Frame #8.

NOTE: In this step, DO NOT tighten any bolt until you connect all parts together
STEP 7 : Following illustration Assembly Frame #9. Using hardware #23 connect Frame #8 to complete. NOTE: In this step, DO NOT tighten any bolt until you connect all part together

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>