SAYAPE A999 Cancelling Headphones with Microphone User Manual

Table of Contents

SAYAPE A999 Cancelling Headphones with Microphone

Accessory list:
Headphones x 1
3.5mm Jack cable x 1
Storage Bag x 1
Charging cable x 1
Carrying case x 1
User Manual x 1
Note: The pictures in this manual are all schematics and may have deviations, please refer to the actual.

Press and hold the power button for 3 seconds to turn on/off the headphones.

NOTE: When the headphones are power off, noise cancellation is disabled.
Power On/ Power Off

Power saving mode
If the headphones are turned on for 10 minutes without Bluetooth connection and ANC is not turned on, the headphones will automatically shut down.

Bluetooth Pairing
- Turn on the headphones and automatically enter Bluetooth pairing mode.
- Turn on the Bluetooth of your phone, and select “A999” for pairing.
- You will hear “connected” after successfully paired, lf the connection fails, please retry the above steps.
- The headphones will automatically connect to the last connected device.
Connect to two mobile phones via Bluetoot h
- Connect the headphones with phone 1, then turn off the headphones and the Bluetooth of phone 1.
- Turn on the headphones and make them enter pairing mode.
- Connect the headphones with phone 2.
- Turn on the Bluetooth of phone 1, and select “A999” in the Bluetooth list.
Switch between two connected mobile devices
- Pause audio on your first mobile device.
- Play audio on your second mobile device.
  NOTE: Your headphones receive phone calls from both devices, regardless of which device is playing audio.
Clear the headphone device list
- Power on your headphones, press and hold the Volume+ and Volume- for 3 seconds until turn off the headphones.
- Delete “A999” from the Bluetooth list on your mobile device.
- All devices are cleared and you can follow “Bluetooth Pairing” to reconnect the device.

Music play

EQ Modes :

Operating Instruction

Volume+/ Volume-
Press and hold Volume+/ Volume- to increase or decrease the volume.
Note: To prevent sudden and drastic changes in volume, each prolonged press of the volume +/- buttons will only adjust the volume by one level at a time.
Voice assistant
You can use the headphones to access voice control on your mobile device. To access voice control, triple-press the button.
Call Button
Line-in music play
Use the standard 3.5mm audio cable to connect the headphones with your mobile phone and computer to play music.
ANC On /Off
Slide the ANC switch to turn on or off the ANC function, you will hear “ANC ON” or “ANC OFF.”
ANC Mode Switching (ANC on )
Press and hold the Power Button 1.5 seconds, you will hear “High”, “Medium”, “Low” to validate the selected ANC level.
Note: If press and hold the power button for up to 3 seconds, the headphones will turn off.

Headphones charging
- Please use the included Type-C charging cable to charge the battery, or it may damage the headphones or can not be charged, the headphones automatically turns off when charging.
- Charge: The red light is always on; full charge: the light off.
- If using a USB wall charger, the output requires DC 5V 1 A.

Warning: Do not put the battery into the fire as this may cause an explosion.

Note: Please note that technical specifications are subject to change without notice.

If the headphones are malfunctioning and you can’t hear the sound
- Confirm that the headphones are working.
- Verify that the volume level of the headphones are appropriate.
- Confirm that the headphones are properly connected to the phone.
- Confirm that the headphones are in the normal operating range.
When the headphones does not work well for calls
- Check that the phone is in an area with a strong signal.
- Please ensure that the headphones are within the effective use distance of 10 metres and that there are no obstructions between the headphones and the phone.
If the headphones work abnormally, please reset the headphones as follows.
- Turn off and restart the headphones.
- If the headphones cannot be turned off, please charge the headphones to force them to turn off, after the headphones are turned off, disconnect the power supply to stop charging, and then turn it on again.
We are here to help
- Our support department is available for any questions you may have concerning the product and its use. You can contact us at service.SAYAPE@gmail.com.

Note: Please include the order number, product model/name and provide a clear and concise description of the issue.

Do not keep listening at a relatively high volume, If tinnitus and hearing loss occur, please lower the volume or stop using it.
Do not use headphones to listen to music, or make or answer calls while driving, with respect to avoid danger caused by distraction.
Please ensure that products with lithium batteries are charged at least once every three months even if they are not used for a long period of time.
Maintenance for the earmuffs: wet a towel with shower gel or hand soap, rub out bubbles to wipe the surface of the earmuffs, then wash the towel and wipe twice and dry.
Keep the product dry and do not leave it in a damp place as this may affect the internal.
Do not leave the product in the sun or in places with high temperatures. High temperatures can shorten the lifespan of electronic components, damage batteries and deform some plastic parts.
Do not keep the product in an excessively cold place as this may damage the internal circuit boards.
Do not attempt to take the product apart. The product may be damaged by unprofessional personnel.
Do not use strong chemicals or cleaning agents to clean your headphones.
Do not drop, vibrate strongly or hit the product with a hard object as this may damage the internal circuitry.

ACTIVE NOISE CANCELLATION WIRELESS HEADPHONES

COMPATIBLE:
Android iPhone iPad Symbols

Read User Manual Online (PDF format)