WTA FDRR148 Transit Van Strata Roof Rack Installation Guide
- June 1, 2024
- WTA
Table of Contents
WTA FDRR148 Transit Van Strata Roof Rack
Product Information
Specifications
- Product Name: Ford Transit Strata Roof Rack
- Model Number: 6F3D5R5R14-8
- Package Contents:
- Driver Front Rail – QTY-1
- Driver Rear Rail – QTY-2
- Passenger Front Rail – QTY-1
- Fairing – QTY-1
- Crossbar – QTY-6
- Rail Nut – QTY-
- Head Screw – QTY-
Product Usage Instructions
-
Step 1: Unboxing
Open the package and ensure all components are included as per the specifications list. -
Step 2: Assembly
Follow the assembly guide provided in the manual to attach the driver and passenger rails, fairing, crossbars, rail nuts, and head screws securely. -
Step 3: Installation
Place the assembled roof rack on the Ford Transit vehicle and secure it following the installation guide. -
Step 4: Final Checks
Double-check all connections and ensure everything is tightly secured before using the roof rack for transportation.
FAQ
Q: How do I know if the roof rack is compatible with my Ford Transit?
A: The Ford Transit Strata Roof Rack is designed specifically for Ford Transit models. Ensure you have the correct model number before purchasing.
Q: Can I install the roof rack by myself?
A: While it is possible to install the roof rack independently, we recommend seeking professional assistance to ensure proper installation and safety.
Q: How much weight can the roof rack carry?
A: The roof rack's weight capacity is determined by the manufacturer. Please refer to the user manual for specific weight limits and guidelines.
Ford Transit Strata Roof Rack
FDRR148
Ensuring the proper assembly and secure attachment of all WTA products to your
vehicle is of utmost importance. Failure to adhere to these guidelines may
lead to automobile accidents, presenting a substantial risk of bodily harm or
even fatality to yourself and others. As the owner, it is incumbent upon you
to meticulously assemble and secure WTA products, conduct a thorough
examination of the mounting points and attachments before use, and routinely
checking for any indications of wear or damage. To ensure optimal safety, we
strongly recommend enlisting the services of a qualified installer for the
installation of any aftermarket accessories on your vehicle. If you lack
mechanical expertise or are unfamiliar with the installation procedures, it is
crucial to have the product installed by a certified professional or
individuals with the requisite skills. Remember, the responsibility rests with
you, and it must be approached with seriousness to safeguard the well-being of
all individuals involved.
Parts
| Name | BOM | QTY |
|---|---|---|
| RIVER FRONT RAIL | 1 | 1 |
| PASSENGER FRONT RAIL | 2 | 2 |
| RIVER REAR RAIL | 3 | 3 |
| PASSENGER REAR RAIL | 4 | 4 |
| FRONT ARMOR PLATE | 5 | 5 |
| REAR ARMOR PLATE | 6 | 6 |
| JOINT PLATE | 7 | 7 |
| FAIRING PLATE | 8 | 8 |
| CROSSBAR | 9 | 1 |
| --- | --- | --- |
| M 8 -20 HEXGON SOCKET BUTTON HEAD SCREW | 10 | 2 |
| M 8 -25 HESGON SOCKET BUTTON HEAD SCREW | 11 | 3 |
| M 8 *16 FLAT WASHER | 12 | 4 |
| M 8 SPRING LOCK WASHER | 13 | 5 |
| M 10-22 HEXGON HEAD SCERW | 14 | 6 |
| SQUARE NUT | 15 | 7 |
| M10 FLAT WASHER | 16 | 8 |
| M10 SPRING LOCK WASHER | 17 | 1 |
| --- | --- | --- |
| T SLIDE NUT | 18 | 2 |
| 1 9 M8-12 HEXAGON SOCKET BUTTON HEAD SCREW | 19 | 3 |
| LOCK NUT | 20 | 4 |
| 21 |
THANK YOU!
- PLEASE INSPECT THE PRODUCT TO ENSURE THERE WAS NO DAMAGE INCURRED DURING SHIPPING.
- IF THERE IS DAMAGE TO REPORT, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT AS SOON AS POSSIBLE.
- NEXT, USING THE “PACKAGE CONTENTS” PAGE, CHECK INVENTORY AND FAMILIARIZE YOURSELF WITH THE PARTS AND HARDWARE.
- GATHER ALL TOOLS REQUIRED FOR INSTALL.
- 10 mm WRENCH
- 17 mm WRENCH
TOOLS
PACKAGE CONTENTS
HARDWARE PACK
LET’S GET STARTED!
- SLIDE HALF OF THE RAIL NUTS INTO THE PASSENGER-SIDE FACTORY ROOF RAIL, AND HALF OF THEM INTO THE DRIVER-SIDE RAIL.
- SPACE OUT THE RAIL NUTS CLOSE TO THE FINAL POSITION (GROUPS OF 2) SEE FIGURE 1 FOR ROUGH REFERENCE DIMENSIONS.
- BEGIN PLACING THE RAILS ON THE ROOF. THE RAIL WITH THE FVC BADGE SHOULD GO ON THE DRIVER SIDE OF THE VAN IN THE REAR LOCATION. ALL OF THE RAILS ARE UNIQUE TO ACCOMMODATE DIFFERENT LADDERS AND PLACEMENTS. START LOOSELY ATTACHING THE SIDE RAILS TO THE ROOF RAILS USING THE M10-22 HEXGON HEAD SCREW & M10 SPRING LOCK WASHERS & M10 WASHERS, BUT DO NOT TIGHTEN ALL THE WAY DOWN. (SEE FIGURE 3 FOR DETAIL)
- PLACE YOUR CROSSBARS IN DESIRED LOCATION, LOOSELY BOLTING THE M8-20 HEXAGON HEAD SCREWS & M8 SPRING LOCK WASHERS & M8 WASHERS IN PLACE.
NOTE IF INSTALLING OUR FRONT FAIRING; IT IS SUGGESTED TO BOLT THE FAIRING TO THE CROSSBAR FIRST (SEE FIGURE 5), THEN ATTACH THAT ASSEMBLY TO THE ROOF RACK (SEE FIGURE 6).
- TIGHTEN ALL CROSSBAR BOLTS USING THE 10 mm WRENCH NOTE- DO NOT OVERTIGHTEN! IF YOU ARE CONCERNED ABOUT THE BOLTS BACKING OUT, YOU CAN PUT A DAB OF BLUE LOCTITE ON THE BOLTS BEFORE TIGHTENING DOWN COMPLETELY.
- NOW TIGHTEN SIDE RAILS TO ROOF RAIL USING THE 17 mm WRENCH
GET THERE WITH WHITE TOP ADVENTURES
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>