IDEA EXO32-A 4×8 inch FOH Loudspeaker User Guide

IDEA EXO32-A 4×8 inch FOH Loudspeaker

Product Information

Specifications

• Enclosure design: 3-way configuration
• LF Transducers: Horn-loaded quad 8 cluster
• MF Transducers: Large format compression driver
• HF Transducers: PM4 membrane 1.75 compression driver
• Class D Amp Continuous Power: 1.4 kW
• DSP: Included
• SPL (Continuous/Peak): Not specified
• Frequency Range (-10 dB): Not specified
• Frequency Range (-3 dB): Not specified
• Coverage: Not specified
• Dimensions (WxHxD): 470 mm x Height not specified x Depth not specified
• Weight: 00 kg
• Power Supply: Universal regulated switch mode
• Nominal Power Requirements: 100-240 V 50-60 Hz
• Current Consumption: 1.2 A
• Cabinet Construction: Birch plywood
• Grille Finish: Textured paint
• Handles: 2 integrated handles
• Feet/Skates: 4 + 4 rubber feet
• Installation Accessories: M8 and M6 inserts, 36 mm pole socket, Rigging frame, U-bracket, Flight case, Barra

Product Usage Instructions

Installation

This product should be installed by qualified professionals following safe practices and local regulations. Refer to the owner’s manual for detailed installation instructions.

Power Connection

Connect the power supply of the unit to a universal regulated switch mode power source with a nominal power rating of 100-240 V at 50-60 Hz. The current consumption of the unit is 1.2 A.

Audio Signal Connectivity

Connect your audio input source to the appropriate input connectors on the unit. Ensure proper signal flow and adjust settings as needed.

Maintenance and Care

Regularly inspect the cabinet construction, grille finish, and handles for any damage. Keep the unit clean and free of debris for optimal performance.

FAQ

• Q: What is the power rating of the Class D Amp?
  • A: The continuous power of the Class D Amp is rated at 1.4 kW.
• Q: What type of transducers are used in the HF section?
  • A: The HF section utilizes a PM4 membrane 1.75 compression driver for high-frequency reproduction.

overview

EXO32-A is a FOH loudspeaker, capable of delivering sufficient dynamic range and total output for Regional touring concerts and high SPL DJ gigs. Just like the EXO18, EXO32-A combined with BASSO Series subwoofers, allows for highly portable point source Main PA solution, but EXO32 delivers such performance in an enclosure with similar overall dimensions to a 12” two way speaker. The 3 way configuration, relies on a LF horn-loaded quad 8” cluster, a large format compression driver that takes care of a wide band of mid-range frequencies and PM4 membrane 1,75” compression driver for sizzling HF reproduction. EXO32-A stands out in power density and audio reproduction quality, pole mount, stacked or flown.

Features

• Very high power-density
• 3-Way 4 × 8” LF Woofers + 3” MF CD + 1” HF CD
• 140 dB Peak SPL
• 3 kW Class-D Powersoft power module
• Integrated 24-bit @48kHz DPS with 4 selectable presets
• Pole-mount, flown and stacked configurations
• Rugged and durable 15-mm birch plywood
• Dedicated transport, installation and rigging accessories

Applications

• Portable Live Sound
• Fixed installation for Live Music
• DJs and clubs FOH and monitoring

Technical data

Preset 2 – LF Cut/ Indoor

Preset 3 – HF Boost / Long-throw

Preset 4 – FLAT/Close field

SPL (Continuous/Peak)| 134/140 dB SPL
Frequency Range (-10 dB)| 70 – 21000 Hz
Frequency Range (-3 dB)| –
Coverage| MF horn: 80°/50°|HF horn: 80°/60° (H/V)
Dimensions (WxHxD)| 470 × 470 × 470 mm
Weight| 40 kg
Audio Signal Connectors Input

Output

| ****

XLR XLR

AC Connectors| 2 × Neutrik powerCON® I/0
Power Supply| Universal, regulated switch mode
Nominal Power Requirements| 100 – 240 V 50-60 Hz
Current Consumption| 2.7 A
Cabinet Construction| 15 mm Birch Plywood
Grille| 1.5 mm perforated weatherised steel with protective foam
Finish| Durable IDEA proprietary High Resistance paint coating process
Handles| 2 integrated handles
Feet/Skates| 4 + 4 Rubber feet
Installation| Threaded M8 and M6 inserts. Bottom 36 mm pole mount socket
Accessories| Rigging frame (RF EXO 32)

U-bracket vertical (UB-E32-V) Flight case (FC EXO SM32) 35 mm Pole (K&M-21336)

Technical drawings

warnings on safety guidelines

• Read this document thoroughly, follow all safety warnings and keep it for future reference.
• The exclamation mark inside a triangle indicates that whatever repairing and component replacement operations must be done by qualified and authorized personnel.
• No user-serviceable parts inside.
• Only use accessories tested and approved by IDEA and supplied by the manufacturer or an authorized dealer.
• Installations, rigging and suspension operations must be done by qualified personnel.
• This is a Class I device. Do not remove Mains connector ground.
• Only use accessories specified by IDEA, complying with maximum loads specifications and following local safety regulations.
• Read the specifications and connection instructions before proceeding to connect the system and use only cabling supplied or recommended by IDEA. Connection of the system should be done by qualified personnel.
• Professional sound reinforcement systems can deliver high SPL levels that may result in hearing damage. Do not stand close to the system while in use.
• Loudspeakers produce magnetic field even while they are not in use or even when disconnected. Do not place or expose loudspeakers to any device that is sensitive to magnetic fields such as television monitors or data storage magnetic material.
• Keep the equipment in the safe working temperature range [0º-45º] at all times.
• Disconnect the equipment during lightning storms and when it is not to be used for a long time.
• Do not expose this device to rain or moisture.
• Do not place any objects containing liquids, such as bottles or glasses, on the top of the unit. Do not splash liquids on the unit.
• Clean with a wet cloth. Do not use solvent-based cleaners.
• Regularly check the loudspeaker housings and accessories for visible signs of wear and tear, and replace them when necessary.
• Refer all servicing to qualified service personnel.
• This symbol on the product indicates that this product should not be treated as household waste. Follow local regulations for recycling of electronic devices.
• IDEA declines any responsibility from misuse that may result in malfunction or damage of the equipment.

warranty

• All IDEA products are guaranteed against any manufacturing defect for a period of 5 years from date of purchase for acoustical parts and 2 years from date of purchase for electronic devices.
• The guarantee excludes damage from incorrect use of the product.
• Any guarantee repair, replacement and servicing must be exclusively done by the factory or any of the authorized service centres.
• Do not open or intend to repair the product; otherwise servicing and replacement will not be applicable for guarantee repair.
• Return the damaged unit, at shipper’s risk and freight prepaid, to the nearest service centre with a copy of the purchase invoice in order to claim guaranteed service or replacement

Declaration of conformity

I MAS D Electroacústica S.L. , Pol. A Trabe 19-20 15350 CEDEIRA (Galicia – Spain), declares that EXO32-A complies with the following EU Directives:

• RoHS (2002/95/CE) Restriction of Hazardous Substances
• LVD (2006/95/CE) Low Voltage Directive
• EMC (2004/108/CE) Electro-Magnetic Compatibility
• WEEE (2002/96/CE) Waste of Electric and Electronic Equipment
• EN 60065: 2002 Audio, video and similar electronic apparatus. Safety requirements.
• EN 55103-1: 1996 Electromagnetic compatibility: Emission
• EN 55103-2: 1996 Electromagnetic compatibility: Immunity

References

• IDEA Pro Audio

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>