MicMol Aqua Max 900 App User Guide
- June 1, 2024
- MICMOL
Table of Contents
MicMol Aqua Max 900 App
Congratulations on purchasing your Aqua Max 900 Read this guide to get started to installing and setting your lighting
How to install the Aqua Max
App Connecting Overview
Download APP
Compatible with iOS and Android.
Search “iMicMol” or “Smart Life” from App Store and Google Play to download
directly.
Pairing (Please make sure your Bluetooth is turned on. )
Information
- ATTENTION: Never put the light and the smart controller in the water. Doing so will dangerous and damage your light.
- WARNING: Do not touch the lights body when it working which will generate heat and may let your hands uncomfortable.
- WARNING: Make sure all the cables are connected before plug to electricity or will damage your light.
Important Handling Information
NOTICE: Failure to follow these handling instructions could result in damage to your Light or other property.
Carrying your Light before you move your Light, shut it down and disconnect all cables and cords connected to it. Using power cord Never force a connector into a port. Don’t put the power cord into your tank when it connected. When you Setup your Light please make sure that it locate power supply where it will not be exposed to any water or moisture. Mount your power supply where it won’t get wet. Include a “drip loop” – a tied loop of cord hanging down below the level of the electrical outlet. That way, if water happens to run down the cord from the tank, it will drip off onto the floor rather than into the outlet. Drip Loops should always be used to help prevent water from traveling along the cord and coming into contact with an electrical outlet. Drip loops must always be below the level of the outlet. If the plug or outlet does get wet, DO NOT TOUCH the cord. Storing your Light If you are going to store your Light for an extended period of time, keep it in a cool location (ideally, 71° F or 22° C). When cleaning the outside of your Light, first shut down your Light and unplug the power cord. Then use a damp, soft, lint-free cloth to clean the lamp exterior. Avoid getting moisture in any openings. Do not spray liquid directly on the lamp. Do not use aerosol sprays, solvents, or abrasives that might damage the finish.
MicMol and the Environment
MicMol. recognizes its responsibility to minimize the environmental impact of
its operations and products.
Warranty
MicMol warrants all MicMol products to be free from manufacturing defects for one year from the original purchase date when purchased through an authorized MicMol retailer. This warranty does not cover any damages caused by misuse, neglect, alterations or improper handling/transport/maintenance/installation. Physical damages are not covered by warranty. MicMol does not cover personal injury, personal loss, or other damages associated with the use of our products. To request warranty service, please email us at [email protected]. A purchase receipt is required for any warranty service. Products requiring warranty service must be returned to MicMol or authorized MicMol retailer. You are responsible for the cost of shipping a warranty claim to MicMol and any damages that may occur during transit. Once a returned product has been inspected, it will be repaired or exchanged at our discretion and returned to you. Thank you very much.
Warranty Card
- Product Name:
- Product Model:
- Dealer Name:
- Dealer Tel:
- Purchase Date:
- User Name:
- User Tel:
2012~2024 MicMol Limited. All rights reserved. MicMol, the MicMol Logo, Air Pro, Master, THOR, Aqua CC, Aqua mini, Aqua Pro, Aqua Max, Aqua Air, BloomBee are trademarks of MicMol registered. WWW.MICMOL.COM – AM001-242001-A Printed in China.
Specifications
- Product Name : Aqua Max 900
- Compatibility : iOS and Android
- App : iMicMol or Smart Life
- Control : Bluetooth-enabled
- Power Source : Electricity
- Warranty : Check warranty card for details
FAQ
Q: Can I control the Aqua Max 900 remotely?
A: Yes, you can control the Aqua Max 900 remotely using the iMicMol or
Smart Life app.
Q: What should I do if the device does not connect to the app?
A: Ensure Bluetooth is turned on, and try resetting the device by holding
the reset button for 3 seconds.