MICMOL NanoX Marine Spectrum Intelligent Control System User Guide

MICMOL NanoX Marine Spectrum Intelligent Control System User Guide

NanoX Overview

How to install the Bracket

To assemble the bracket and connect to the light, then installing to tank and fix it.

App Control Overview

Download APP

Compatible with iOS and Android.
Search “iMicMol” from App Store and Google Play to download directly

Pairing (Please make sure your Bluetooth is turn on.

Information

Important Handling Information

Carrying your Light before you move your Light, shut it down and disconnect all cables and cords connected to it. Using power cord Never force a connector into a port. Don’t put the power cord into your tank when it connected. When you Setup your Light please make sure that it locate power supply where it will not be exposed to any water or moisture.Mount your power supply where it won’t get wet. Include a “drip loop” – a tied loop of cord hanging down below the level of the electrical outlet. That way, if water happens to run down the cord from the tank, it will drip off onto the floor rather than into the outlet. Drip Loops should always be used to help prevent water from traveling along the cord and coming into contact with an electrical outlet. Drip loops must always be below the level of the outlet. If the plug or outlet does get wet, DO NOT TOUCH the cord.
Storing your Light If you are going to store your Light for an extended period of time, keep it in a cool location (ideally, 71° F or 22° C).
When cleaning the outside of your Light, first shut down your Light and unplug the power cord. Then use a damp, soft, lint-free cloth to clean the lamp exterior. Avoid getting moisture in any openings. Do not spray liquid directly on the lamp. Do not use aerosol sprays, solvents, or abrasives that might damage the finish.
MicMol and the Environment
MicMol. recognizes its responsibility to minimize the environmental impact of its operations and products.

Warranty

MicMol warrants all MicMol products to be free from manufacturing defects for one year from the original purchase date when purchased through an authorized MicMol retailer. This warranty does not cover any damages caused by misuse, neglect, alterations or improper handling / transport / maintenance / installation. Physical damages are not covered by warranty. MicMol does not cover personal injury, personal loss, or other damages associated with the use of our products. In order to request warranty service, please email us at support@micmol.com. A purchase receipt is required for any warranty service. Products requiring warranty service must be returned to MicMol or authorized MicMol retailer. You are responsible for the cost of shipping a warranty claim to MicMol and any damages that may occur during transit. Once a returned product has been inspected, it will be repaired or exchanged at our discretion and returned to you. Thank you very much.

Warranty Card

Product Name:
Product Model: _
_Dealer Name:
Dealer Tel:
Purchase Date:
User Name:
User Tel:  

© 2012~2023 MicMol Limited. All rights reserved.
MicMol, the MicMol Logo, NanoX, Air Pro, Master, THOR, Aqua CC, Aqua mini, Aqua Pro, Aqua Air, BloomBee are trademarks of MicMol registered. WWW.MICMOL.COM – AA0012-2209-A Printed in China

Read More About This Manual & Download PDF:

References

• MicMol - Vision HD - Aqua Max - Air Pro - THOR X PRO - Felix - Master- SOLO - Aqua CC - Aqua Air - Drop - Aqua mini - Aqua Pro - BloomBee - Grow Mol - The Professional LED Lighting Design for Aquarium & Horticulture.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>