MICMOL MASTER Smart LED Aquarium Lighting User Guide

June 13, 2024
MICMOL

MICMOL MASTER Smart LED Aquarium LightingQuick Start Guide

MASTER
Congratulations on purchasing your Master
Read this guide to get started to installing and setting your lighting

Master overview

MICMOL MASTER Smart LED Aquarium Lighting - overview

How to install the Bracket and Hanging Kits

  1. Adjustable BracketMICMOL MASTER Smart LED Aquarium Lighting - overview 1
  2. Adjustable hanging kitsMICMOL MASTER Smart LED Aquarium Lighting - overview 2

App Controller Overview

Download APP
Compatible with iOS and Android.
Search “iMicMol” from App Store and Google Play to download directly.
MICMOL MASTER Smart LED Aquarium Lighting - Download
APP![MICMOL MASTER Smart LED Aquarium Lighting

Case Black
Connectivity 2 Bluetooth 2.4G  + Broadcast 2.4G
Dimension 1202020 mm
Weight 0.2 Kg
Voltage DC24V – 1~6A
Cable Plug Standard 5 Pin Waterproof Plug
Controls Hold on 3 Seconds

Factory Reset
Triple-Press
Linkage Mode – Receiver Mode
White Flash
Waiting for Pairing
White Constant
Paired + Device is Online
Red Constant
Linkage Mode – Receiver Mode
Systems  2| iOS + Android

Pairing (Please make sure your Bluetooth is turn on. )

MICMOL MASTER Smart LED Aquarium Lighting - Download APP
1

Download and open iMicMol APP to Add Device| Choose “Auto Scan”, the device will appear automatically| Connecting now….
MICMOL MASTER Smart LED Aquarium Lighting - Download APP
2
Waiting for connect to 100%| Great!
You can set your light now.| Turn “ON” to control your light

Information

ATTENTION: Never put the light and the smart controller in the water. Doing so will dangerous and damage your light.
WARNING: Do not touch the lights body when it working which will generate heat and may let your hands uncomfortable.
WARNING: Make sure all the cables are connected before plug to electricity or will damage your light.

Important Handling Information

NOTICE: Failure to follow these handling instructions could result in damage to your Light or other property.
Carrying your Light before you move your Light, shut it down and disconnect all cables and cords connected to it. Using power cord Never force a connector into a port. Don’t put the power cord into your tank when it connected. When you Setup your Light please make sure that it locate power supply where it will not be exposed to any water or moisture.
Mount your power supply where it won’t get wet. Include a “drip loop” – a tied loop of cord hanging down below the level of the electrical outlet. That way, if water happens to run down the cord from the tank, it will drip off onto the floor rather than into the outlet. Drip Loops should always be used to help prevent water from traveling along the cord and coming into contact with an electrical outlet. Drip loops must always be below the level of the outlet. If the plug or outlet does get wet, DO NOT TOUCH the cord.
Storing your Light If you are going to store your Light for an extended period of time, keep it in a cool location (ideally, 71° F or 22° C).
When cleaning the outside of your Light, first shut down your Light and unplug the power cord. Then use a damp, soft, lint-free cloth to clean the lamp exterior. Avoid getting moisture in any openings. Do not spray liquid directly on the lamp. Do not use aerosol sprays, solvents, or abrasives that might damage the finish.
MicMol and the Environment
MicMol. recognizes its responsibility to minimize the environmental impact of its operations and products.

Warranty

MicMol warrants all MicMol products to be free from manufacturing defects for one year from the original purchase date when purchased through an authorized MicMol retailer. This warranty does not cover any damages caused by misuse, neglect, alterations or improper handling / transport / maintenance / installation. Physical damages are not covered by warranty. MicMol does not cover personal injury, personal loss, or other damages associated with the use of our products. In order to request warranty service, please email us at support@micmol.com. A purchase receipt is required for any warranty service. Products requiring warranty service must be returned to MicMol or authorized MicMol retailer. You are responsible for the cost of shipping a warranty claim to MicMol and any damages that may occur during transit. Once a returned product has been inspected, it will be repaired or exchanged at our discretion and returned to you. Thank you very much.
Warranty Card
Product Name:…………………….
Product Mode:…………………..
Dealer Name:…………………..
Dealer Tel:………………………..
Purchase Date:………………….
User Name:………………………
User Tel:…………………………

© 2012~2022 MicMol Limited. All rights reserved.
MicMol, the MicMol Logo, Master, THOR, Air Pro, Aqua CC, Aqua mini, Aqua Pro
Aqua Air, BloomBee are trademarks of MicMol registered.
WWW.MICMOL.COM – MT0010-2209-A Printed in China.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals