KASON 11808 LED Fixture Installation Guide
- June 1, 2024
- KASON
Table of Contents
INSTALLATION INSTRUCTIONS
Part Number: 11808* U.S. Patent No.: 8,950,893;
9,546,782; D-759,285
1808 LED Fixture
WARNING
- All wiring should comply with the National Electrical Code and be installed by a qualified electrician
- Minimum 90°C supply conductors
- Sealing of wire openings is necessary to prevent condensation from forming and water collecting inside of fixture. Failure to properly seal fixture will VOID warranty
DIRECTIONS
- Mount junction box, run supply wires, and make wiring connections to power supply
- Seal conduit openings around wires and hole plugs
- Line up the gasket opening with the connector on the lens housing. Insert screws (Qty. 4) through housing and into gasket. This will hold screws during final assembly.
SPECIFICATIONS
- Frequency: 50/60 Hz
- Power Factor: >0.9
| *Part No. | Description | Qty./ Carton | Wgt./ Carton |
|---|---|---|---|
| 1180800A100 | LED Fixture, 12 W, VP, 120 V | 12 | 2.1 lb (0.95 kg) |
| 1180800A200 | LED Fixture, 14 W, VP, 240 V | 12 | 2.1 lb (0.95 kg) |
| 91808000357 | Tamper-Resistant Screw Kit | ||
| 918080A1588 | 12 W, 120 V, Replacement Module |
© 2023 Kason
Industries, Inc. IS-1808 0523
kasonind.com | 1.800.935.2766
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>