KPON ES-06 MagSafe Magnetic Power Bank User Manual
- June 1, 2024
- KPON
Table of Contents
KPON ES-06 MagSafe Magnetic Power Bank
Product Information
- Specifications
- Model: XYZ-2000
- Power: 120V, 60Hz, 500W
- Capacity: 2 liters
- Material: Stainless steel
- Dimensions: 10″ x 8″ x 12″
Product Usage Instructions
- Setup
- Place the XYZ-2000 on a flat, stable surface near a power outlet.
- Ensure the power cord is not damaged and insert it into a compatible power socket.
- Operation
- Fill the stainless steel container with ingredients up to the recommended capacity.
- Secure the lid tightly before starting the device.
- Select the desired settings using the control panel.
- Press the power button to start the XYZ-2000.
- Cleaning and Maintenance
- Unplug the device and allow it to cool down before cleaning.
- Use a damp cloth with mild detergent to clean the exterior of the product.
- Remove the stainless steel container and wash it with warm, soapy water after each use.
- Dry all components thoroughly before reassembling.
FAQs
- Q: Can I use the XYZ-2000 for blending hot liquids?
- A: No, it is not recommended to blend hot liquids in this product due to safety reasons.
- Q: How do I troubleshoot if the device stops working suddenly?
- A: Check if the power cord is properly connected and the power outlet is functioning. If the issue persists, contact customer support.
FUNCTION INTRODUCTION
Indicator Light
Charge the power bank:
- The blue indicator light flashes. When the power bank is charged to 100%, the blue indicator light is always on.
Use the charging cable to connect the power bank to charge your phone:
- The blue indicator light is always on.
Use the power bank to charge your phone wirelessly:
- Press the On/Off button and turn on wireless charging. The blue indicator light is always on.
- If your phone is fast charging, the red fast charging indicator light is always on.
Method of application:
- The package includes a USB-C to USB-C / Lightning cable, which can charge all USB-C and Lightning devices.
- Press the on/off button. Use the cable to connect the power bank to the phone. It can charge USB-C and Lightning devices.
Compatible Phone Models:
- MagSafe Compatible:
- iPhone 12 /13 /14 /15 Series
- Wireless Charging Compatible:
- iPhone 8/X /XS /XR /11 /12 /13 /14 /15 Series (Up to 7.5W)
- Android phones that support wireless charging or Qi protocols (Up to 15W)
Product Specifications
- Product Size: L107 W66 H7.9mm
- Package Size: 115 74 14 mm
- Net Weight: 111g / 3.92 oz
- Colour: Purple / Blue / Space Gray
- Material: ABS Plastic + Aluminum Alloy
- Battery Material: Lithium Battery
- Battery Capacity: 5000 mAh
- Rated Capacity: 4850 mAh
- Input Power: 5V=3A, 9V=2.22A, 12V=1.67A
- Output Power: 5V=3A, 9V=2.22A, 12V=1.67A
- Wireless Charge for iPhone 8~11 Series: 7.5W
- Wireless Charge for Android & iPhone 12~15 Series:15W
- Wired Charge: 20W
Package List
- 1 x MagSafe Magnetic Power Bank
- 1 x USB-C to USB-C / Lightning Cable
- 1 x User Manual
Warming:
- Do not throw, bump, disassemble and repair by yourself.
- Avoid direct sunlight and high-temperature environments.
- If the case is too thick, it may affect wireless charging. Please remove the case before charging.
- Please charge the charger regularly for a long time.
FCC
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>