APEX FORGE Magic D50 Pro Laser Distance Meter User Manual

APEX FORGE Magic D50 Pro Laser Distance Meter

Safety Regulations

Warning:

• Please read the safety regulations and operation guide carefully before operating. & Please read all of the operational guide and safety regulations in this manual before operation. Improper operations without complying with this manual guide could cause damage to the device, influence on measurement results or physical injury to the user.
• The instrument is not allowed to disassemble or repair in any way. It is forbidden to do any illegal modification or performance change for laser emitter. Please keep it out of reach of children and avoid using by any irrelevant personnel.
• It is strictly prohibited to shoot eyes or other parts of the body with the laser; it is not allowed take the laser to shoot any objects’ surface with strong reflectivity.
• Due to electromagnetic radiation interference to other equipment and devices, please don’t use the meter in the plane or around medical equipment, don’t use it in anflammable, explosive environment
• Discarded batteries or meter devices shall not be processed just like household garbage, please handle them in line with related laws and regulations.
• Any quality issues or any questions on the meter, please contact local distributors or manufacturers in time, we are ready to offer solutions for you.

DISPLAY & KEYBOARD

Lithium battery

• The built-in 3.7V 370mAh lithium battery is non-remov­able. The instrument has an integrated charging circuit, with clear Undervoltage indication, and charging indication.
• Battery charging: It is recommended to use the mobile phone charger or 5V /1 A adaptors with Type-C charging cable to charge the battery.
• The instrument shall be charged in time when running out of battery or its battery symbol shows blank and flashes after being turned on due to its insufficient battery capacity. Insert USB to charge, and the battery symbol scrolls display . When fully charged, it will display and flash.

Battery maintenance

When you don’t use the device for a long time, charge the product fully and recharge it every six months to avoid battery damage.

Power on/off and Settings

Power on/off the instrument: In the shutdown state, press to start the instrument and prepare to measure. In the power-on state, press for 3 seconds to turn off the instrument. The instrument will be powered off automatically after 150 seconds with no operation on the instrument.
Unit setting: In the measurement mode, long press to switch between different measurement units. The instrument offers 6 units to choose from.

Reference point Settings: Short press to switch the front-end basis and back-end basis. The default reference point is the back-end basis.
Backlight On/off: The screen backlight is power on/off automatically. The instrument turns on the backlight for 15 seconds after you press any keys of the instrument. And it will turn off the backlight to save power after 15 seconds of no operation on the instrument.

Self-calibration and Sound settings

To ensure the accuracy of the instrument, a self-calibration function is provided. Calibration method: In the power-off state, press, and hold and at the same time until the screen shows and flashing numbers at the bottom. At this time, self-calibration mode is entered. Then, the user can press to adjust the value according to the error of the instrument. The adjustment range is -9~9mm. For example: the actual distance is 3.780m. If the measured value is 3.778m, which is 2mm lower than the actual value, you can enter the calibration mode, and press to increase the calibration value by 2mm on the existing basis. If the measured value is 3.783m, which is 3mm higher than the actual value, you can enter the calibration mode, and press to lower the calibration value by 3mm on the existing basis. After adjustment, press to save the calibration result. Press to save calibration result and enter sound settings,
the screen shows” “and there are flashing letters at the bottom. Press to switch sound on/off, “ ” is sound on, “ ” is sound off. After the setting is completed, press to save and exit the setting.

Distance, Area, Volume and Pythagorean Theorem Measurement

Single Measurement: When the instrument prepares to measure, press to emit the laser, lock the measurement point. Then press again to single measure the distance and the result shows in the main display area.
Continuous Measurement: When the instrument prepares to measure, press and hold to enter continuous measurement mode. During the continuous measurement, the maximum and minimum value and the difference between maximum and minimum show on the secondary display area. The main display area shows the current measurement value, and the short press or to exit continuous measurement mode.
Area Measurement: Press once, the screen shows , and one side of the rectangle flickers. Complete the following actions as prompted: Press to measure the first side(width) Press to measure the second side(length) The instrument will calculate the area automatically, and the result shows on the main display area. The secondary display area will show the measurement value of the length and width. During measurement, the user can press to clear the result and remeasure. When there is no data in the display area, press to exit area measurement mode, and enter single measurement mode.

Volume Measurement: Press twice, the instrument enters volume measurement mode, There will be a cube flickering on the screen. Complete the following actions as prompted: Press to measure the first side(width) Press to measure the second side(length) Press to measure the third side(height) The instrument will calculate the volume automatically, the calculation result is shown in the main display area. And the length, width, and height of the cube are shown in the secondary display area. During measurement, you can press to clear the measurement result and remeasure. When there is no data in the display area, press to exit volume measurement mode and enter single measurement mode.
Pythagorean Theorem Measurement There are four preset modes for the instrument to measure the distance of one side of a triangle by using the Pythagorean theorem. It is convenient for users to perform indirect measurements in a specific complex environment.

1. Measure the hypotenuse and adjacent side of a right triangle to indirectly measure the opposite height. Press three times to enter the height measurement mode by the Pythagorean theorem. At this time, the display will show a and its hypotenuse is flickering, the instrument emits laser to lock the measurement point. Press to measure the first side (a); Press to measure the second side (b); The instrument will automatically calculate the length of the height(x).
2. Measure the adjacent and opposite side of a right triangle to indirectly measure the length of the hypotenuse. Press times. At this time, the display will show and its adjacent is flickering, and the instrument emits laser to lock the measurement point. Press to measure the first side (a); Press to measure the second side (b); The instrument will automatically calculate the length of the hypotenuse(x).
3. Measure the two hypotenuses and base of the triangle to calculate the opposite height: Press five times. At this time, the display will show and its hypotenuse is flickering, and the instrument emits a laser to lock the measurement point. Press to measure the first side (a); Press to measure the second side (b); Press to measure the third side (c) The instrument will automatically calculate the length of the auxiliary height(x).
4. Measure hypotenuse and vertical line to calculate base sum: Press six times. At this time, the display will show and its hypotenuse is flickering, and the instrument emits laser to lock the measurement point. Press to measure the first side (a); Press to measure the second side (b); Press to measure the third side (c) The instrument will automatically calculate the length of the base(x).

In Pythagorean theorem measurement mode, the right-angle side must be shorter than the hypotenuse length, otherwise the instrument will display an error signal. In Pythagorean theorem measurement mode, it is necessary to ensure the measurement from the same starting point and measure according to the order of hypotenuse and right-angle sides, thus ensure the accuracy of measurement.
Record Storage Function
Measurement records will be automatically saved, and users can export records through the App.

Bluetooth

• The Bluetooth function is set to turn on by default at the factory, and there is a Bluetooth icon on the screen of the instrument.
• Bluetooth automatically turns on when you turn on the device. If the “AF MAGIC” App is opened, it will automatically search and connect to the App device.
• When the instrument is turned on, open the “AF MAGIC” App and click the add device button in the upper right corner to connect the device.
• If you do not need to connect Bluetooth, you can manually turn off Bluetooth to save power.
• When the instrument calculates the final measurement result, it will automatically record the data. Long press to view the record, and the specific operation to view the record is as follows:
  • Short press and to switch the record;
  • Long press to clear all data;
  • Short press to exit viewing records.

App Installation

Scan the product QR code, or search for “AF MAGIC” in the App Store, download and install the App. The Android user can search for the App “AF MAGIC” in Google Play. Product QR code

Error Code

During use, the following prompts may appear in the main display area

Prompts

|

Reason

|

Reason

---|---|---

Err1

|

The signal is too weak

| Measure the target with strong reflectivity

Err2

|

The signal is too strong

|

Measure the target with weak reflectivity

Err3

|

The battery voltage is too low

|

Charge the battery

Err5

|

P_ytha_gorean measurement violations

| Re-measure to make sure the hypotenuse is larger than the right-angled side

Err6

| Exceeds the measurement distance range|

Make the instrument use within the range

Specifications

• The minimum of the range refers to the distance measured by front-end datum
• ‘ D’ refers to the actual distance
• There will be a large error in the measurement results from harsh environments such as: strong sunlight, fluctuating temperature, weak reflectivity of reflective surface and insufficient battery power. In this case, it is better to use the target reflector. Conditions that affect the measurement include: the objective lens or laser tube is blocked by foreign matter; the measurement target is unclear, such as water surface, glass, mirror surface; laser jitter during measurement, etc.

Daily Care

It is forbidden to store the instrument in a high temperature and high humidity environment for a long time. When the instrument is not used for a long time, please put the instrument in a bag and store it in a cool and dry place. Please keep the surface of the instrument clean, wipe the dust on the surface with a damp soft cloth, and do not clean the instrument with corrosive lotion. The laser output window and its focus lens can be wiped according to maintenance procedures for the optical device.

Packing List

Please carefully check whether all the accessories are completed according to the packing list when purchasing.

WARRANTY CARD

Your Warranty Includes

36-Month Coverage: Within 36 months of purchase, we will provide timely and effective online after-sales service. We will repair or replace any defective product (due to manufacturing fault) within the warranty period. The battery provides 24- month coverage.

How to Return Your APEXFORGE Product

• Contact support@apex-forge.com with your order number.
• We will issue you a return label for your return.
• Tear off the ‘Return Details’ page and fill in the details. Include this inside your return package.
• We will issue your replacement/refund on receiving the return package.

Return Details

In order to process your return as quickly as possible, we require the following information. Please fill out this form and include it in your return package. If your purchase was fulfilled by Amazon, please use Amazon’s 30-day return service.

Address:

App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc. support@apex-forge.com Shenzhen Taiduoqian Technology Co., Ltd. 406, Unit 1, Building 15, Tao Garden, No.86, Taoyuan Road, Sunxi Community, Sungang Sub-District, Shenzhen CN

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>