TAC 40-33130T PNC Side Steps Instruction Manual
- June 1, 2024
- TAC
Table of Contents
TAC 40-33130T PNC Side Steps
Product Information
Specifications
- Product: 4 Inch Sidebars for 2022-2024 Toyota Tundra Crewmax
- Part Number: 40-33130T
- Website: www.tacautoparts.com
Product Usage Instructions
Parts List
- 1 Driver/Left PNC Sidebar
- 1 Passenger/Right PNC Sidebar
- 1 Driver/Left Front Mounting Bracket
- 1 Passenger/Right Front Mounting Bracket
- 3 Driver/Left Rear Mounting Brackets
- 3 Passenger/Right Rear Mounting Brackets
- 16 8mm x 30mm Hex Bolts
- 16 8mm x 25mm Combo Bolts
- 16 8mm Lock Washers
- 16 8mm x 24mm OD x 2mm Flat Washers
Usage Instructions
Cleaning Instructions
To protect your investment, do not use any type of polish or wax that may
contain abrasives that could damage the finish. Use only mild soap to clean
the Sidebars.
Installation Steps
Step 1: Passenger/Right Side Installation
- Remove plastic plugs (if equipped) or hex bolts from threaded holes at the front mounting location.
- Attach the Driver/Left Front Mounting Bracket to the front location.
- Attach the Passenger/Right Front Mounting Bracket to the front location.
- Attach the Passenger/Right Rear Mounting Brackets to the designated locations.
- Attach the Passenger/Right PNC Sidebar to the Mounting Brackets.
Frequently Asked Questions (FAQ)
-
Q: Can I use abrasive polish or wax on the Sidebars?
A: No, it is recommended not to use any polish or wax that may contain abrasives to prevent damage to the finish. Only mild soap should be used for cleaning. -
Q: What is included in the parts list?
A: The parts list includes all necessary components for installing the sidebars, such as mounting brackets, bolts, lock washers, and flat washers. -
Q: How many mounting brackets are provided in the package?
A: The package includes a total of four mounting brackets – one front bracket for each side and three rear brackets for each side.
INSTALLATION INSTRUCTIONS
4INCH SIDEBARS
2022-2024 TOYOTA TUNDRA CREWMAX
PART# 40-33130T
PARTS LIST
| 1 | Driver/Left PNC Sidebar | 3 | Passenger/Right Rear Mounting Brackets |
|---|---|---|---|
| 1 | Passenger/Right PNC Sidebar | 16 | 8mm x 30mm Hex Bolts |
| 1 | Driver/Left Front Mounting Bracket | 16 | 8mm x 25mm Combo Bolts |
| 1 | Passenger/Right Front Mounting Bracket | 16 | 8mm Lock Washers |
| 3 | Driver/Left Rear Mounting Brackets | 16 | 8mm x 24mm OD x 2mm Flat Washers |
PROCEDURE
- REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY. ASSISTANCE IS HIGHLY RECOMMENDED.
- Starting on the Passenger/Right side of the vehicle and remove the plastic plugs or hex bolts from the factory mounting location along the bottom of the body, (Figures 1 & 4).
- Select the Passenger/Right Front Mounting Bracket. Attach the Bracket to the front location with (2) 8mm Hex Bolts, (2) 8mm Lock Washers and (2) 8mm Flat Washers, (Figures 2 & 3). Do not tighten hardware.
- Repeat Steps 2 & 3 to attach the (3) Rear Mounting Brackets, (Figures 4—8).
- Select the Passenger/Right PNC Sidebar. Place the Sidebar onto the cradles of the Mounting Brackets. IMPORTANT: Do not Slide front to back or rotate the Sidebar or damage may result. Attach the Sidebar to the Mounting Brackets with (6) 8mm Combo Bolts, (Figures 9 & 10). Do not tighten hardware.
- Level and adjust the Sidebar and tighten all hardware.
- Repeat Steps 1—6 to attach the Driver/Left PNC Sidebar.
- Do periodic inspections to the installation to make sure that all hardware is secure and tight.
To protect your investment , Do not use any type of polish or wax that may contain abrasives that could damage the finish. Use only mild soap to clean the Sidebars.
Passenger/Right Side Installation Pictured
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>