Asiatelco BTG600L GPS Tracker Instructions

June 1, 2024
Asiatelco

Asiatelco-LOGO

Asiatelco BTG600L GPS Tracker

Asiatelco-BTG600L-GPS-Tracker-product

Product Information

  • Maximize efficiency.
  • Minimize risks.
  • Manage assets.

Key Features

  • Small-size GPS tracker
  • Battery-powered with internal Li rechargeable battery
  • Slap & Track technology for easy installation
  • Asset location tracking and alert notifications
  • Integrated LTE Cat.M1 modem, GNSS receiver, and 3-axis accelerometer
  • Pre-configured software with customizable event alarms
  • Supports variable frequency reporting and Geo-fencing

Specifications

  • Cellular: LTE Cat-1/UMTS/GPRS
  • GNSS: GPS, GLONASS, BeiDou & Galileo
  • Sensor: 3-axis Accelerometer
  • Battery: 5200mAh Lithium rechargeable battery
  • Operating Current:
    • Hibernate: < 50uA @ 3.7V
    • Tracking: 150mA @3.7V Typical
    • Reporting: 250mA @3.7V Typical
  • Physical: Dimensions: 100 x 46 x 33.5mm, Weight: [Weight information missing]

Usage Instructions

Installation

The BTG600L tracker is designed for easy installation with no wiring required. Simply place the tracker on the asset to be tracked.

Powering On

  • To activate the tracker, ensure the internal Li rechargeable battery is fully charged.
  • Press the power button to turn on the device.

Programming and Configuration

  • Customize the tracker settings by programming it to wake up on motion or set a preset schedule for reporting.
  • Configure event alarms and Geo-fences as needed.

Monitoring and Alerts

  • Track the asset’s location using the provided software.
  • Receive alerts when the asset is moved or tampered with.
  • Monitor reports triggered by different events.

Battery Maintenance

  • To ensure optimal performance, recharge the battery after a year of usage due to its self-discharging nature.
  • The operation time depends on usage and LTE signal strength.

FAQ

  • Q: How long does the battery last on a full charge?
  • A: The battery life depends on usage and LTE signal strength, typically lasting up to a year before requiring recharging.
  • Q: Can the tracker be used in extreme weather conditions?
  • A: The BTG600L has an IP67 rating, making it suitable for use in various environmental conditions including exposure to dust and water.
  • Q: Can I customize the tracking frequency?
  • A: Yes, the device supports variable frequency reporting based on motion or stationary status, allowing you to customize tracking as needed.

Ideal for stolen vehicles, goods or other assets to be tracked with no installation process required. The battery-powered, small-size BTG600L GPS tracker is designed to be used with an internal Li rechargeable battery for fast installation. It is a “Slap & Track” GPS tracker. The BTG600L provides asset location tracking and receiving alerts when the asset has been moved or tampered with, plus many more features.
IT’S RELIABLE
The BTG600L is a high-performance, IP67 rated device. It has an integrated LTE Cat.M1 modem, a GNSS receiver, and a 3-axis accelerometer, for cellular data communication, location tracking, and motion detection respectively.
IT’S SIMPLE
With power from the battery, the BTG600L can be easily used anywhere the tracking is required. BTG600L can be programmed to wake up on motion, upon a preset schedule. Reports can be triggered periodically or in response to events – such as removing, movement, Geo-fence violations, and many others.
IT’S FUNCTIONAL
The BTG600L comes with pre-configured software. Its internal motion sensor and configurable event alarms enable total management of your high-value assets. The device supports variable frequency reporting when moving or stationary.

HIGHLIGHTS

  • LTE Cat-1/UMTS/GPRS
  • Integrated cellular and GNSS antenna
  • LED status indicators for GNSS and network registration
  • Integrated accelerometer
  • BLE5.0 support, low power consumption
  • Large Li-rechargeable backup battery
  • SMS, UDP, TCP, FTP & MQTT
  • Up to 16 Geo-fences (polygon and circles)
  • Over the air configuration and firmware update
  • Extended AT Command set for flexible and easy configuration
  • Easy installation
  • IP67 Rating
  • Optional
  • Magnet Holder

The application firmware is flexible and can be customized to be compatible with your existing server at special request.

Specifications

CELLULAR

  • LTE Cat-1/UMTS/GPRS
  • LTE Bands: 1/2/3/4/5/7/8/20/28
  • UMTS Bands: 1/2/5/8
  • GSM Bands: 850/900/1800/1900
  • Integrated high-performance antenna

GNSS

  • GPS, GLONASS, BeiDou & Galileo
  • Tracking Sensitivity: -161 dBm
  • Acquisition Sensitivity: -146 dBm
  • Location Accuracy: < 2.5CEP

SENSOR

  • Accelerometer: 3x

BATTERY INFORMATION

BTG600L: Lithium rechargeable battery 5200mAh @3.7V. It is designed for the case where more reports are needed per day. So the operation time depends on the usage case. The Lithium battery has the nature of self-discharging, so the usage should be limited to 1 year and then recharging is required. (Depends on the LTE signal strength and how many reports per hour)

ELECTRICAL

  • Operating Current
  • Hibernate: < 50uA @ 3.7V
  • Tracking 150mA @3.7V Typical
  • Reporting: 250mA @3.7V Typical

PHYSICAL

  • Dimensions: 100 x 46 x 33.5mm
  • Weight : <150 g
  • Internal Cellular and GNSS Antenna

ENVIRONMENTAL

  • IP67 Rating
  • Operation Temperature: -30°C to +75°C
  • Storage Temperature: -40°C to +85°C

Blue tooth

  • BLE 5.0

INTERFACE IOs (for maintenance only)

  • I/O Connector : Type-C connector
  • UART1 TTL (3.3v) (RX/TX) x2
  • GPIO (programmable 3.3v input or output)x1
  • DC_IN (5V for charging)x1
  • GND (x1)
  • Power Connector: DC terminal 8-32v

APPROVALS

  • FCC
  • Carrier

Asiatelco Technologies Inc. (ATEL)
Asiatelco is the leading provider of wireless terminal products to its valued customers worldwide. Its innovative products and solutions are widely used for reliable broadband access, IoT/M2M applications and voice communication with 4G LTE, 3G & 2G wireless technologies. ATEL’s sales and marketing are globally positioned. It has become a globally well-known company in the wireless industry due to its excellent products, solutions and services. For more information, contact Asiatelco Technologies Inc.

FCC STATEMENT

FCC Regulations
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF Exposure compliance requirements, this grant applies to only Mobile Configurations. The antennas used for the transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co‐located or operating in conjunction with any other antenna or transmitter.

CONTACT

  • Asiatelco Technologies Inc. | 4611 Teller Ave, Newport Beach, CA 92660, USA
  • sales@asiatelco.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals