LASER LSH-3MLED-399 Smart Multicolour Light Strip User Manual

LASER LSH-3MLED-399 Smart Multicolour Light Strip

Product Specifications

• Product Name : Smart Multicolour Light Strip LSH-3MLED-399
• Power Source: 5V USB-A
• Control: Laser SmartHome App
• Wireless Connectivity: Wi-Fi (2.4GHz)

Product Usage Instructions

• Install the App:
  • Install the Laser SmartHome app on your smartphone or tablet by scanning the QR code provided in the manual.
• Configure Settings:
  • Open the app, tap on the ‘Me’ icon, then tap on the ‘Settings’ icon. Select ‘App Notifications’ and turn on all notification settings.
• Turn On the Lights:
  • Make sure your Wi-Fi is enabled on your device. Connect the light strip to a 5V USB-A power source using a stable Wi-Fi network. If the lights show a solid red color, reset them by holding down the Power button on the controller until they flash once.
• Connect with App:
  • In the app’s home screen, tap on ‘+ > Add Device’. Follow the instructions to connect the light strip to the app via Wi-Fi.
• Install Light Strip:
  • Attach the light strip to a clean, dry, and smooth surface. Peel off the adhesive backing slowly, stick the light strip firmly, secure the controller box, and plug in the power adapter to turn on the lights.
• Basic Controls:
  • Use the Laser SmartHome app to turn on/off lights, access customization settings, pick colors, apply static colors, and control different zones of the light strip.

SAFETY INFORMATION

• For indoor use only.
• Only use recommended power adapters.
• Keep the device away from water, fire, humidity, or hot areas.
• Don’t try to open, fix, or modify the device.
• Don’t use the device where wireless devices aren’t allowed.
• Install the adapter close to the device for easy access.
• Use the product carefully and at your own risk.
• Not suitable for emergency lighting.
• Avoid running cords where they can’t be checked.
• Use insulated staples or plastic ties to secure cords.

WHAT’S IN THE BOX

• 3m light strip and Wi-Fi controller
• User manual

You may also need

• 5V USB-A power source (wall adaptor, powerbank, laptop/PC, etc.)
• Smartphone or tablet with Bluetooth and connected to a 2.4GHz Wi-Fi network
• Wi-Fi network password

WARNING: Keep away from infants and young children; use under parental supervision.

Installation process:

1. Install the Laser SmartHome app on your smartphone or tablet.
2. Connect the light strip using the app.
3. Install the light strip.

INSTALL APP AND CONFIGURE SETTINGS

INSTALL APP

Scan the QR code to get the Laser SmartHome app on your iOS or Android device.

Launch the app. If you are new, sign up and log in.

NOTE

• App features and screenshots may change as we keep improving the app.

CONFIGURE SETTINGS

Configure recommended app settings:

1. Tap on Me icon in the bottom right.
2. Tap on the (Settings) icon in the top right.
3. Select App Notifications.
4. Turn on all notification settings.
5. Return to the app’s home screen.

TURN ON THE LIGHTS

• Ensure Bluetooth and Wi-Fi are enabled on your smartphone or tablet.
  NOTE: Use a stable 2.4GHz Wi-Fi network only.

• Lay out the light strip and plug it into a standard 5V USB-A power source. Use a USB-A wall adaptor if possible.

• The LED lights will flash red initially. If they stay solid red, reset them by holding down the Power button on the controller until the lights flash once, then release.

CONNECT WITH APP

On the app’s home screen, tap on + > Add Device.

The app will find the device; tap Add.

If the app does not auto-detect the lights, turn off Bluetooth on your phone. On the Laser SmartHome app, tap Lighting > Strip Lights (Wi-Fi).

Confirm the lights are blinking.

Confirm/enter the Wi-Fi network name and password.
NOTE: Your device must be connected to a 2.4GHz Wi-Fi network.
The blinking stops once the Wi-Fi connection process begins.

• Wait for the app to confirm the lights are added successfully.
• If it fails, restart the process from page 6.
• After connecting the light strip to your Laser SmartHome app, you can only control it via Bluetooth alone (without Wi-Fi).

INSTALL LIGHT STRIP

Once you’ve set up the light strip using the Laser SmartHome app, attach it to a surface.

Installation Tips:

• Determine placement location that:

• Avoids heat, moisture, and splashing.

• Has a smooth, clean & dry surface.

• Allows access to the controller box.

• Only cut along indicator lines.
  WARNING: Once cut, it cannot be reattached.

• Avoid sharp bends or creases.

• Use gentle curves instead of 90° angles.

• Avoid bending on LED beads.

Installing Your Light Strip

1. Find a clean, dry, and smooth surface, then wipe off any dust.
2. Make sure the light strip is unplugged from power.
3. Peel off the adhesive backing slowly, bit by bit.
4. Stick the light strip and press it down firmly for 10- 15 seconds.
5. Secure controller box.
6. Plug the power adapter into a 5V USB-A power source to turn on your light strip.

BASIC CONTROLS

Laser SmartHome App Home Screen

Light Strip App Home Screen

Tip: Press the Power button on the controller to switch between basic lighting effects manually.

CUSTOMISE COLOURS

You can customize the light strip by picking different colors for each zone.

1. Tap on the icon to change colors.
2. Pick a color, then tap a zone to apply it.

FLOWING LIGHTING EFFECTS

1. Tap on the icon on the bottom menu.
2. Apply preset lighting effects by tapping one.
3. To make your effects, tap on Add +.

CUSTOMISE LIGHTING EFFECTS

MUSIC MODE

TIMERS AND SCHEDULE

TIMERS

1. Tap on the icon on the bottom menu.
2. Tap on Plan.

COUNTDOWN TIMER

1. Slide the Countdown slider to the right to switch it on.
2. Choose the time period and hit Save to start the countdown. The lights will go off when it ends.

CREATE SCHEDULE

1. Tap on + at the bottom right of the Plan screen.
2. Select a time.
3. Select Repeat days.
4. Select your action: Turn on or Turn off.
5. Save.

SETTINGS

Tap on icon in the top right corner to access light strip settings.

ADDITIONAL RESOURCES

Check out this website for instructional videos on:

• Connecting your Laser SmartHome devices with Google Home and/or Amazon Alexa.
• Using Google and/or Amazon voice assistants to control your devices.
• Setting up scenarios and automation.
• Sharing your devices with others.

Link: https://connectsmarthome.com.au/resources-downloads/

FAQS

How to reset the Laser SmartHome account password?

• Tap ‘Forgot Password’ on the Sign-In screen.
• Enter the email address you used to sign up.
• You’ll get an email soon with steps to reset your password.

How can I access my devices with another phone?

• Install the Laser SmartHome app on your other phone.
• Sign in with your account details.
• When you are done, make sure to log out of the app on secondary devices for privacy.

Can I register my devices to another Laser SmartHome account?

• A device can only be linked to one Laser SmartHome account.

• If you want to connect the device to a different account or pass it on to a family member, you must first remove it from your account. To remove the device, go to device Settings page.
  INFO: You can remove a device even if it’s offline.

• Once removed, the device can then be linked to another Laser SmartHome account.

• If you don’t remove the device, the next user will get a warning that it’s linked to another account. Tap > to send us an unbinding request via the app.

Can I control the device if I’m traveling overseas?

• Yes, just make sure your smartphone with the Laser SmartHome app and Laser SmartHome devices are connected to the internet.
• Additional charges for international data roaming may apply.

How can I reset the device?

• Press and hold the Power button on the controller until the lights flash once, then release.
• Wait for the lights to flash quickly, showing it’s ready to connect.

TROUBLESHOOTING

The light strip does not appear on the app:

• If the lights are not blinking rapidly, hold down the power button on the controller until the light flashes rapidly to reset it.
• Make sure Bluetooth and Wi-Fi are enabled on your smartphone.
• Ensure that the Wi-Fi signal is strong where it is being installed. If not move the lights closer to the Wi-Fi access point temporarily.
• Make sure you are connected to a 2.4GHz Wi-Fi network only.
• Wi-Fi quality can differ due to home factors such as home construction type and interference from other electronic devices. Ensure that the Wi-Fi signal is strong where it is being installed. If not move the router closer or get a Wi-Fi extender.
• Check if the router uses MAC filtering. Add the device’s MAC address to the router if needed.
• Most modems/routers support both 2.4GHz and 5GHz bands and may use the same Wi-Fi network name (SSID) for both bands. Log into the router’s settings and check:
  • Is the 2.4GHz band enabled?
  • If both 2.4GHz and 5GHz bands are using the same SSID, find the settings that allow you to separate the 2.4GHz and 5GHz bands. Usually, there will be an option to configure each band individually. Change the SSID for one or both bands to make them distinct. For instance, “NetworkName_2.4GHz” and “NetworkName_5GHz”.
• If you are using Telstra Smart Modem, refer to the following guide to resolve band steering issues: https://www.laserco.com.au/Telstra-NBN-Gen-Smart-Modem-Fix

My device is offline:

• It means the device can’t connect to our server. This could happen if your internet is down, the connection between your device and our server is weak, or your device is too far from your Wi-Fi router.
• Usually, the device will reconnect when your internet is back. If it stays offline, try:
  • Turn it off for 10 seconds, then back on.
  • Check your internet connection and try restarting your Wi-Fi router if needed.

SPECIFICATIONS

• No. LED lights: 90
• Wi-Fi standard: 802.11 b/g/n
• Wi-Fi Frequency: 2.4GHz
• LED color: RGB
• No. of colours: 16 million
• Brightness: 116 lumens
• App: Laser SmartHome (supported on Android 6.0 and up; iOS 11.0 and up)
• Voice control: Amazon Alexa, Google Assistant
• Power input: DC 5V
• Dimensions: (L×W×H) 3m×10mm×3.8mm
• Weight: 140g

More Information

Thank you for your purchase
Laser Corporation is 100% Australian-owned & operated. To get the most out of your product please read the user manual carefully and keep it for future use.

For specific information relating to your product such as Spare Parts, FAQs, Warranty claims, and more, please scan the following QR code:

• Visit our website: www.laserco.com.au

• Check us out at: www.youtube.com/lasercoau

Frequently Asked Questions

• Q: Can the light strip be reattached once cut?
  • A: No, once cut, it cannot be reattached. Make sure to plan your installation carefully.
• Q: What should I do if the app fails to add the lights successfully?
  • A: Restart the connection process from step 6 and ensure your device is connected to a 2.4GHz Wi-Fi network as specified.

References

• Laser: The Ultimate Tech Hub for Home Entertainment, Audio, ...
• Home - Connect SmartHome
• Laser: The Ultimate Tech Hub for Home Entertainment, Audio, ...

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>