Hillrom CENTRELLA Smart + Bed Tips Instruction Manual

: June 6, 2024
: Hillrom

Table of Contents

CENTRELLA BED EXIT ALERT SYSTEM
SCALE OPERATIONS
STAND ASSIST
FOLEY POSITION LIMIT
AUDIBLE ALERTS
SIDERAIL PROTOCOL STATUS
SAFE VIEW®+ SYSTEM
INTELLIDRIVE® POWERED TRANSPORT*
AIR MATTRESS CONTROLS*
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CENTRELLA®
SMART+ BED TIPS

GRAPHICAL CAREGIVER INTERFACE (GCI)® TOUCHSCREEN

Controls

CENTRELLA BED EXIT ALERT SYSTEM

Three sensitivity settings:

Changes Position
Moves Towards the Edge
Has Left the Bed

To turn on the bed exit alert:

Select the Bell icon in the Navigation Menu of the GCI touchscreen.
Select the appropriate setting for your patient.
Listen for a single beep and look for the Bed Exit On icon indicating the system is armed.
Silence the Bed Exit Alert System without deactivating the system.
Select the silence button on the GCI or the yellow silence button on the side rail. The alarm will re-arm automatically, once the patient is back in bed.

SCALE OPERATIONS

Zeroing the Scale:

Select the Scale icon on the Navigation Menu of the GCI touchscreen.
Select Zero. Select “New Patient” or “Re-Zero” for the same patient.

New Patient Zero:

Clears previous patient weight history
Zeros the scale
Resets bed to facility’s default settings

Re-Zero:

Keeps patient weight history and bed settings customized for that patient.
Zeros the scale

Weighing the Patient:

Select the Scale button on the Navigation Menu on the GCI touchscreen.
Select Weigh and follow the on-screen instructions then select Continue.
Select Save to save the patient’s weight. You will hear a single beep confirming the weight has been saved.

STAND ASSIST

To Activate Stand Assist:

Select the Stand Assist icon on the home screen of the GCI touchscreen.
Select and hold the Stand Assist control until the legs are flat and the head is at the desired angle.
One button simultaneously levels legs to a flat position and raises the head-of-bed to position the patient safely.

Note:

If equipped with a Centrella® max-powered air surface, the seat section of the bed will automatically inflate to provide more support for the patient.

Pro Tip:

Teach your patients to use Stand Assist on their patient pendant. Non-fall-risk patients can use this on their own and fall-risk patients can use this proactively before they get bedside.
Patient pendants are an optional feature.

FOLEY POSITION LIMIT

The Foley Position Bag Holders can be found at the foot-end of each side of the bed.

To Turn the Foley Position Limit On and Off:

Select the Setting Menu control on the Navigation Menu of the home screen and select the Bed Features control.
Select Off or ON, and Accept to lock in the new setting.

Note:

A Foley Position Limit indicator will display on the screen when activated.

AUDIBLE ALERTS

Two Types of Audible Alerts:

Single Beep: Activity was performed successfully (i.e., when the bed reaches the lowest position).
Triple Beep: Attention is needed; look at the message on the GCI Touchscreen for more information (i.e., when you attempt to use control that is locked out).

SIDERAIL PROTOCOL STATUS

To Adjust Siderail Protocol:

Select the Setting Menu control on the Navigation Menu of the home screen and select the Bed Features control.
Select Rail Protocol and configure rail protocol followed by your facility and select Accept.
The side rail protocol is reset to facility default when the bed is zeroed for New Patient.

Note:

The si derail protocol is based on your facility’s policy.

SAFE VIEW®+ SYSTEM

Siderail Protocol:

Green = Number of side rails up is equal to, or more than, set protocol
Flashing Amber = Fewer side rails up than set protocol

Bed In Lowest Position Status:

Green = In the lowest position
Flashing Amber = NOT in lowest position

Bed Exit Status:

Green = Bed Exit is ON
Flashing Amber = Bed Exit ALERTING
Solid Amber = Bed Exit SILENCED
Blue = Bed Exit is OFF

*Heart/Respiratory Rate Status:**

Green = HR/RR monitoring is on and measurements are within the set thresholds
Flashing Amber = HR/RR measurement is outside set thresholds

*WatchCare™ System Status:**

Green = Ready to detect incontinence event
Solid Amber = Incontinence event detected

INTELLIDRIVE® POWERED TRANSPORT*

To Activate IntelliDrive®Powered Transport:

Unplug the power cord and set the brake pedal to Steer (green pedal down).
As the drive wheel lowers, the indicator on the
Transport Pod flashes green. When the wheel has lowered completely, the indicator turns solid green and a single beep will sound.
Select down on one of the black enable switches on the underside of the blue push handles. Apply pressure to the handles to move the bed either forward or backward.

To Deactivate IntelliDrive® Powered Transport:

Set to Brake or Neutral, or plug the bed into power.

AIR MATTRESS CONTROLS*

Three Mattress Modes:

Normal Mode: Provides continuous full-body pressure redistribution for patients.
Max Inflate Mode: Maximizes firmness of the surface, for 15 minutes, to assist in patient handling and repositioning.
Turn Assist: Helps the caregiver turn the patient to the left or right. This can be used for procedures such as patient positioning and linen changes.

Navigate to Different Mattress Modes:

Select the patient mattress icon.
Select the most appropriate setting for your patient.

Note:

For proper operation, there must be a minimum of 32 kgs (70 lbs) on the surface.

Pro Tip:

Press and hold Adjust Bed Button to adjust the head-of-bed, knees, and foot angle to the required position.

*Optional Feature
Learn more at hillrom.com.

Hill-Rom reserves the right to make changes without notice in design, specifications, and models. The only warranty Hill-Rom makes is the express written warranty extended on the sale or rental of its products.
© 2019 Hill-Rom Services, Inc. ALL RIGHTS RESERVED. 211071 REV 1 16-OCT-2019 ENG – US

FOR DETAILED WARNING AND CAUTION STATEMENTS, AND OPERATING INSTRUCTIONS, REFER TO THE CENTRELLA® BED USER MANUAL (193587).