LIGHTONA 5050 RGB Flexible LED Strip Light User Manual
- June 5, 2024
- LIGHTONA
Table of Contents
LIGHTONA
5050 RGB Flexible LED Strip Light
User Manual
WARNING
DO NOT IMMERSE IN FIRE CHILDREN UNDER THE AGE OF 16 SHOULD USE THIS PRODUCT
UNDER ADULT SUPERVISION.
User Manual
| In any state, press these two keys to turn on/ off the light strip
---|---
| When light is on, press these 4 keys to reduce or increase brightness, and
they can also adjust the rhythm sensitivity in the music rhythm mode.
| Press relevant keys to select particular colors.
| Press this key to activate auto color changing model, in which color would
change automatically and circularly.
| When color changing is activated, press this key to increase or reduce the
changing speed.
---|---
| When the lights are on, press this key to let the color change gradually
according to the music rhythm.
| 3/7 colors jump changing; 3/7 colors gradient
| Press these 4 keys to set time,1/2/3/4H
APP controller
APP name is “Lotus Lantern”, please search for and install the application in Google play or Apple store or via the QR code on the manual/controller.
http://www.easytrack.net.cn/download/116CHUANZHIGUANG
Note: 108 8.0 or Android 4.3 or later editions are required. Your smart
device should support Bluetooth 4.0 or a later version. Please open the lights
of the strip control APP on your phone, by which you can connect one or more
LED strips through Bluetooth and be able to set and control multiple LED
strip.
Functions are listed as follows:
- Adjust: Adjust the brightness and color temperature of 16 million kinds of colors for the monochrome LED strips.
- Style: Multiple modes to choose from. including strobe. static. transition, gradient You can choose the right model according to the atmosphere.
- Musk: Built-in hIght-sensitheity microphone, when you speak face to the mobile phone, the light strip will feel the size of your voice and the speed of speaking, and change the color and speed.
- Mic: When you speak face to the mobile, the light strip will feel the size of your voice and the speed of speaking, and change the color and speed.
- Schedule: Select the date and time to turn onl off the timing light. The light strip will turn on/ oft for the time you set.
- II you have any questions about the use of the APP, you can refer to the Setting Guide in the upper right corner of the APP interface.
Product Parameters:
LED Type: 5050 RGB
Input Voltage of Adapter. AC85V-265V
Output Voltage of Adapter. DC 24V
Working Temperature: -20 C C
Install the Light Strip
-
Connect power and controller.
-
Connect the controller and the light strip.
Note that the arrow must be arrow-to-arrow when connecting. -
For the best use effect, the connection at each end should not exceed 16.4ft, otherwise, the power supply and controller will be damaged.
Common Troubleshooting
The controller was connected to the power, but not light up
- Check the input power supply: please use the power adapter that we equipped or other adapters with the same specification as ours. The input voltage must meet the voltage requirement of the strip lights. When the input voltage is lower than a requirement, the strip lights will not be turned on, while higher voltage may damage the circuit. The output power of the adapter(KW value) must be equal to, or higher than the power of the LED strip lights.
- Check whether the connector is connected correctly with the lights of the strip. Make sure each interface is connected correctly.
- Check whether the remote control is open.
If the LED strip light is able to light up, but the remote control does not work or can’t control LED light.
- Check whether the insulation sheet is removed from the remote control.
- Make sure the battery on the remote control is installed correctly.
- Ensure that the remote is working within 5 meters and aligned to the infrared receiver of the controller.
- Try to replace the battery.
Attentions:
- Please ensure that the adhesive surface is smooth, and make sure the surface is clean, flat, and dry before sticking the light strips.
- The arrows should be connected on the same line. If the connection is not “arrow to arrow”, the lights won’t work.
- When using the remote control, please point the receiver on the controller, and the remote control distance is 5m.
- Before using the remote control, please pull out the transparent insulation sheet inside the remote control.
- The lights strip can be Gutted every 3 LEDs along with the marks, but please make sure the power is off first. And if you cut them, you will need one more power adapter to light the rest strip up.
- Led strip is not waterproof. For safety, please hide the controller and power supply away from the water during use.
- Light strip must be used under 24V.
Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.