IKEA VARMFRONT Power Bank Blue Instruction Manual

IKEA VARMFRONT Power Bank Blue

Specifications :

Type: E2038

Capacity: 10400mAh/37.44Wh

Input: 5.0Vdc, 3.0A/ 9.0Vdc, 2.0A/ 12.0Vdc, 1.5A (USB-C QC&PD)

Output: 5.0Vdc, 3.0A, 15.0W/ 9.0Vdc, 2.0A, 18.0W/ 12.0Vdc, 1.5A, 18.0W (USB-C QC&PD, USB-A QC)

Additional Information: When two or three ports output are used at the same time, they share 5.0V/3.0A. For indoor use only. Rechargeable Li-Ion battery cell inside.

Product Usage Instructions

Charging the Power Bank:

1. Connect the USB cable to the USB-C port of the power bank.
2. Connect the other end of the USB cable to a USB charger or outlet that can provide sufficient power.
3. The LED indicators will display the charging status of the power bank.

Using the Power Bank:

1. To check the remaining charge and readiness of the USB-A port, press the POWER button once.
2. To stop supplying power via USB-A port, double press the POWER button.
3. To switch between small current supply mode and normal supply power mode, long press the POWER button.

Care Instructions:

To clean the unit, wipe with a soft cloth moistened with mild detergent. Use another soft dry cloth to wipe dry.

Product Servicing:

Do not attempt to repair the product yourself. Opening or removing parts may expose you to dangerous voltage points or risks.

Charging

CONNECTIONS

Functions

1. POWER button
2. LED indicators
3. USB-C (charging and supply power)
4. USB-A (only supply power)

Charging power bank

• Connect the USB-C cable to the USB-C port of the power bank first and then connect the USB cable to a USB charger or USB outlet that can provide sufficient power to charge the power bank. The LED indicators will display the charging status.

Supply power to devices

• Connect the USB cable to the USB-C or USB-A port of the power bank first and then connect the USB cable to the device that you want to charge.
• The power bank will detect a connected device and start charging automatically.
• The LED indicators will display the remaining charge in the power bank during discharging.

Check power status

• Click once on the POWER button and the LED indicators will light up and indicate the remaining power status.
• If the USB cable is not disconnected while the charging process finishes, push the POWER button first to restart the charging.

Small current supply mode

• Press the POWER button for 8 seconds when your device is being charged.
• The function is mainly used to charge certain wearable electronic devices. When charging a device that needs a charging current of less than 100mA via a USB-A port, this mode should be activated.

You can press the button for 3 seconds to exit this mode, it also automatically closes after 2 hours.

Good to know

• You can charge up to 3 devices at the same time since the charger has 2 USB-A ports and 1 USB-C port. (Power Delivery and Quick Charge)
• The USB-C port is compatible with the Power Delivery (PD) 3.0 standard and Quick Charge (QC) 3.0 standard.
• The USB-A ports are compatible with the Quick Charge (QC) 3.0 standard.
• USB cable length and quality influence charging speed and performance.
• Devices may get warm during charging; this is completely normal and they will gradually cool down again after they are fully charged.
• Charging time may vary based on the device’s battery capacity, charge level, the age of the battery, and the temperature in the surrounding area.
• Storage temperature: -10°C to 25°C.
• Power bank operating temperature: 0°C to 40°C.
• Unplug the power bank from the power source before cleaning and when it is not in use.
• Power banks should not be left discharged for a longer period.
• Power banks should not be charged while in contact with flammable materials like textiles.

WARNING

• Do not modify, disassemble, open, drop, crush, puncture or shred the product.
• Only use in dry locations.
• Risk of fires and burns. Do not open, crush, heat above 60°C (140°F) or incinerate.
• Do not subject the product to wet, moist or excessively dusty environments since this can cause damage to the unit.
• Keep the product away from open flames or sunlight to prevent heat buildup.
• Keep the product away from high-voltage devices.
• Children should be supervised to ensure they do not play with the product.
• Do not short-circuit the product or its cells.
• In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes.

CARE INSTRUCTION

To clean the unit, wipe with a soft cloth moistened with a little mild detergent. Use another soft dry cloth to wipe dry.

Product Servicing

Do not attempt to repair this product yourself. If you open or remove parts, you may expose yourself to dangerous voltage points or other risks.

TECHNICAL DATA

• Type : E2038
• Capacity: 10400mAh/37.44Wh
• Input: 5.0Vdc, 3.0A/ 9.0Vdc, 2.0A/ 12.0Vdc, 1.5A (USB-C QC&PD)
• Output: 5.0Vdc, 3.0A, 15.0W/ 9.0Vdc, 2.0A, 18.0W/12.0Vdc, 1.5A, 18.0W (USB-C QC&PD, USB-A QC)

When two or three ports output are used at the same time, they share 5.0V/3.0A.

For indoor use only

Rechargeable Li-Ion battery cell inside.

Power button function (E2038)

Current mode| Sleeping mode| Charging mode| Supply power mode
---|---|---|---
Single press| Shows via LED the remaining charge and that USB-A is ready to use.| USB-A is

ready to use.

| No action
Double press| No action| No action| Stop supplying power
Long press| Turn off after

restart

| No action| Switch to the small current supply mode or back to normal supply power mode

• Manufacturer: IKEA of Sweden AB
• Address: Box 702 SE-343 81 Älmhult SWEDEN

The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or landfills and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.

© Inter IKEA Systems B.V. 2023

FAQS

Q: How do I exit the small current supply mode?

A: You can press the button for 3 seconds to exit this mode, or it will automatically close after 2 hours.

Q: What should I do if there is heat buildup in the power bank?

A: Discontinue use and allow the power bank to cool down before using it again.

Q: How should I dispose of the product?

A: Follow local environmental regulations for disposal. Do not dispose of with household waste; recycle at designated facilities.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>